Context and Motivation] The digital evolution of connected vehicles and the subsequent security risks emphasize the critical need for implementing in-vehicle cyber security measures such as intrusion detection and response systems. The continuous advancement of attack scenarios further highlights the need for adaptive detection mechanisms that can detect evolving, unknown, and complex threats. The effective use of ML-driven techniques can help address this challenge. [Problem] However, constraints on implementing diverse attack scenarios on test vehicles due to safety, cost, and ethical considerations result in a scarcity of data representing attack scenarios. This limitation necessitates alternative efficient and effective methods for generating high-quality attack-representing data. [Contribution] This paper presents a context-aware attack data generator that generates attack inputs and corresponding invehicle network log, i.e., controller area network (CAN) log, representing various types of attack including denial of service (DoS), fuzzy, spoofing, suspension, and replay attacks. It utilizes parameterized attack models augmented with CAN message decoding and attack intensity adjustments to configure the attack scenarios with high similarity to real-world scenarios and promote variability. We evaluate the practicality of the generated attack-representing data within an intrusion detection system (IDS) case study, in which we develop and perform an empirical evaluation of two deep neural network IDS models using the generated data. In addition to the efficiency and scalability of the approach, the performance results of IDS models, high detection and classification capabilities, validate the consistency and effectiveness of the generated data as well.

Federated learning is an approach to train machine learning models on the edge of the networks, as close as possible where the data is produced, motivated by the emerging problem of the inability to stream and centrally store the large amount of data produced by edge devices as well as by data privacy concerns. This learning paradigm is in need of robust algorithms to device heterogeneity and data heterogeneity. This paper proposes ModFL as a federated learning framework that splits the models into a configuration module and an operation module enabling federated learning of the individual modules. This modular approach makes it possible to extract knowlege from a group of heterogeneous devices as well as from non-IID data produced from its users. This approach can be viewed as an extension of the federated learning with personalisation layers FedPer framework that addresses data heterogeneity. We show that ModFL outperforms FedPer for non-IID data partitions of CIFAR-10 and STL-10 using CNNs. Our results on time-series data with HAPT, RWHAR, and WISDM datasets using RNNs remain inconclusive, we argue that the chosen datasets do not highlight the advantages of ModFL, but in the worst case scenario it performs as well as FedPer.

Freight transportation is of outmost importance in our society and is continuously increasing. At the same time, transporting goods on roads accounts for about 26% of the total energy consumption and 18% of all greenhouse gas emissions in the European Union. Despite the influence the transportation system has on our energy consumption and the environment, road transportation is mainly done by individual long-haulage trucks with no real-time coordination or global optimization. In this paper, we review how modern information and communication technology supports a cyber-physical transportation system architecture with an integrated logistic system coordinating fleets of trucks traveling together in vehicle platoons. From the reduced air drag, platooning trucks traveling close together can save about 10% of their fuel consumption. Utilizing road grade information and vehicle-to-vehicle communication, a safe and fuel-optimized cooperative look-ahead control strategy is implemented on top of the existing cruise controller. By optimizing the interaction between vehicles and platoons of vehicles, it is shown that significant improvements can be achieved. An integrated transport planning and vehicle routing in the fleet management system allows both small and large fleet owners to benefit from the collaboration. A realistic case study with 200 heavy-duty vehicles performing transportation tasks in Sweden is described. Simulations show overall fuel savings at more than 5% thanks to coordinated platoon planning. It is also illustrated how well the proposed cooperative look-ahead controller for heavy-duty vehicle platoons manages to optimize the velocity profiles of the vehicles over a hilly segment of the considered road network.

Heavy-duty vehicles driving close behind each other, also known as platooning, experience a reduced aerodynamic drag, which reduces the overall fuel consumption up to 20% for the trailing vehicle. However, due to each vehicle being assigned with different transport missions (with different origins, destinations, and delivery times), platoons should be formed, split, and merged along the highways, and vehicles have to drive solo sometimes. In this paper, we study how two or more scattered vehicles can cooperate to form platoons in a fuel-efficient manner. We show that when forming platoons on the fly on the same route and not considering rerouting, the road topography has a negligible effect on the coordination decision. With this, we then formulate an optimization problem when coordinating two vehicles to form a platoon. We propose a coordination algorithm to form platoons of several vehicles that coordinates neighboring vehicles pairwise. Through a simulation study with detailed vehicle models and real road topography, it is shown that our approach yields significant fuel savings.

Heavy-duty vehicle (HDV) platooning is a mean to significantly reduce the fuel consumption for the trailing vehicle. By driving close to the vehicle in front, the air drag is reduced tremendously. Due to each HDV being assigned with different transport missions, platoons will need to be frequently formed, merged, and split. Driving on the road requires interaction with surrounding traffic and road users, which will influence how well a platoon can be formed. In this paper, we study how traffic may affect a merging maneuver of two HDVs trying to form a platoon. We simulate this for different traffic densities and for different HDV speeds. Even on moderate traffic density, a platoon merge could be delayed with 20 % compared to the ideal case with no traffic.

Heavy-duty vehicles (HDVs) traveling in single file with small intervehicle distances experience reduced aerodynamic drag and, therefore, have improved fuel economy. In this paper, we attempt to maximize the amount of fuel saved by coordinating platoon formation using a distributed network of controllers. These virtual controllers, placed at major intersections in a road network, help coordinate the velocity of approaching vehicles so they arrive at the junction simultaneously and can therefore platoon. This control is initiated only if the cost of forming the platoon is smaller than the savings incurred from platooning. In a large-scale simulation of the German Autobahn network, we observe that savings surpassing 5% when only a few thousand vehicles participate in the system. These results are corroborated by an analysis of real-world HDV data that show significant platooning opportunities currently exist, suggesting that a slightly invasive network of distributed controllers, such as the one proposed in this paper, can yield considerable savings.

Vehicle platooning is important for heavy-duty vehicle manufacturers, due to the reduced aerodynamic drag for the follower vehicles, which gives an overall lower fuel consumption. Heavy-duty vehicle drivers are aware this fact and sometimes drive close to other heavy-duty vehicles. However, it is not currently well known how many vehicles are actually driving in such spontaneous platoons today. This paper studies the platooning rate of 1,800 heavy-duty vehicles by analyzing sparse vehicle position data from a region in Europe during one day. Map-matching and path-inference algorithms are used to determine which paths the vehicles took. The spontaneous platooning rate is found to be 1.2 %, which corresponds to a total fuel saving of 0.07% compared to if none of the vehicles were platooning. Furthermore, we introduce several virtual coordination schemes. We show that coordinations can increase the platooning rate and fuel saving with a factor of ten with minor adjustments from the current travel schedule. The platooning rate and fuel savings can be significantly greater if higher flexibility is allowed.

The first edition of the Grand Cooperative Driving Challenge (GCDC) was held in the Netherlands in May 2011. Nine international teams competed in urban and highway platooning scenarios with prototype vehicles using cooperative adaptive cruise control. Team Scoop, a collaboration between KTH Royal Institute of Technology, Stockholm, Sweden, and Scania CV AB, Södertälje, Sweden, participated at the GCDC with a Scania R-series tractor unit. This paper describes the development and design of Team Scoop's prototype system for the GCDC. In particular, we present considerations with regard to the system architecture, state estimation and sensor fusion, and the design and implementation of control algorithms, as well as implementation issues with regard to the wireless communication. The purpose of the paper is to give a broad overview of the different components that are needed to develop a cooperative driving system: from architectural design, workflow, and functional requirement descriptions to the specific implementation of algorithms for state estimation and control. The approach is more pragmatic than scientific; it collects a number of existing technologies and gives an implementation-oriented view of a cooperative vehicle. The main conclusion is that it is possible, with a modest effort, to design and implement a system that can function well in cooperation with other vehicles in realistic traffic scenarios.