Underactuated systems offer compact design with easy actuation and control but at the cost of limited stable configurations and reduced dexterity compared to the directly driven and fully actuated systems. Here, we propose a compact origami-based design in which we can modulate the material stiffness of the joints and thereby control the stable configurations and the overall stiffness in an underactuated robot. The robotic origami, robogami, design uses multiple functional layers in nominally two-dimensional robots to achieve the desired functionality. To control the stiffness of the structure, we adjust the elastic modulus of a shape memory polymer using an embedded customized stretchable heater. We study the actuation of a robogami finger with three joints and determine its stable configurations and contact forces at different stiffness settings. We monitor the configuration of the finger using feedback from customized curvature sensors embedded in each joint. A scaled down version of the design is used in a two-fingered gripper and different grasp modes are achieved by activating different sets of joints.

Minimally invasive surgery (MIS) is one of the most challenging techniques for robot designers due to the limited size of access points, the high miniaturization level, and the dexterity needed for performing surgical tasks. Conversely, only a few microfabrication technologies are currently available for developing such small-sized systems, which allow safe operations in human bodies. In order to match these challenges in MIS, both design and integration of actuation systems should proceed in parallel with an identification of most effective transmission mechanisms and kinematics. In this paper, an origami parallel module that generates two rotations and one translation is integrated with a twisting module and a compliant gripper to form a novel four-degree-of-freedom grasper. The rotational motion leads to the pitch and yaw motion of the gripper, while the translational motion is converted to a roll motion of the gripper via the twisting module that is stacked on top of the parallel module. In light of plane-symmetric properties of the origami structure in the parallel module, both inverse and forward kinematics are resolved with a geometric approach, revealing a unique joint space and a kinematic mapping of the parallel module, leading to the design of two sets of on-board actuation systems. During the analysis, bending motion of a central spring and static properties of the compliant gripper are modeled using finite-element methods. The structure of the twisting module for motion transmission of the grasper is designed and fabricated using origami folding techniques. Gripping forces of the compliant gripper are evaluated in experimental tests. Further analyses of the system performance are addressed in accordance with the scaling ratio of miniaturization and the scalability of the system is demonstrated by a millimeter-sized origami parallel module produced by the smart composite microstructure fabrication process.

The soft pneumatic actuators (SPAs) are a solution toward the highly customizable and light actuators with the versatility of actuation modes, and an inherent compliance. Such flexibility allows SPAs to be considered as alternative actuators for wearable rehabilitative devices and search and rescue robots. The actuator material and air-chamber design dictate the actuator's mechanical performance. Therefore, each actuator design with a single pressure source produces a highly customized motion but only a single degree of freedom (DoF). We present a novel design and fabrication method for a SPA with different modes of actuation using integrated adjustable stiffness layers (ASLs). Unlike the most SPA designs where one independent chamber is needed for each mode of actuation, here we have a single chamber that drives three different modes of actuation by activating different combinations of ASLs. Adapting customized micro heaters and thermistors for modulating the temperature and stiffness of ASLs, we considerably broaden the work space of the SPA actuator. Here, a thorough characterization of the materials and the modeling of the actuator are presented. We propose a design methodology for developing application specific actuators with multi-DoFs that are light and compact.

Minimally invasive Surgery (MIS) is one of the most challenging fields for robot designers due to the limited size of the access points, to the high miniaturization level and to the dexterity needed for performing surgical tasks. For this reason, the integration of actuators should proceed in parallel with the identification of the most effective transmission mechanisms and kinematics. Conversely, only a few microfabrication technologies are adequate for developing small size mechanisms with safe operation in the human body. In this paper a SMA actuated, miniaturized, origami-enabled, parallel structure is presented as a versatile module for novel robotic tool in MIS, the parallel structure has been combined with a twisting module and a gripper obtaining a 4-DOFs on board actuated end-effector.

Wireless capsule endoscopy recently demonstrated its potential as leading technology for gastrointestinal tract examinations. Many research groups are focusing their efforts on the design of active locomotion methods to allow a complete maneuverability of the device along the gastrointestinal tract. A promising approach for locomotion is represented by master-slave magnetic coupling; however the typical large gradients of magnetic forces make device controllability very hard with important safety concerns: in this framework magnetic capsule localization and interaction force control become extremely relevant. In the present work, a preliminary on-line localization has been implemented obtaining a position feedback closed loop control of a magnetic driven capsule endoscope. Furthermore, interaction forces with the environment have been evaluated by exploiting a dedicated setup for magnetic dragging. Distributed charges-current and dipole-dipole magnetic models applied to capsule endoscopy have been investigated and results have been compared with experimentally measured magnetic forces. Advantages and limitations of employed models have been evaluated and their usability for Real-Time force calculation has been discussed.

Magnetically driven wireless capsule endoscopy (WCE) represents one of the last achievements in the research of minimally invasive tools for gastrointestinal tract (GI) diagnosis. Recently, capsule localization methodologies have been employed to enable system autonomy maintaining a magnetic link with the device and managing interaction forces with GI tissues. To achieve these objectives, the locomotion platforms exploit automatic motion in some degrees of freedom and unsupervised contact with the external patient abdomen can occur. In this paper safety issues are faced; in particular a safety system, able to monitor pressure with patient abdomen, has been designed, characterized, and integrated with a magnetically driven WCE locomotion platform. New technologies, such as smart textiles, have been employed as sensible element. The proposed system showed promising results in controlling the pressure exerted on the abdomen respecting safety limits and increasing the efficiency and range of locomotion.

Wireless capsule endoscopy offers significant advantages compared with traditional endoscopic procedures, since it limits the invasiveness of gastrointestinal tract screening and diagnosis. Moreover, active locomotion devices would allow endoscopy to be performed in a totally controlled manner, avoiding failures in the correct visualization of pathologies. Previous works demonstrated that magnetic locomotion through a robotic-aided platform would allow us to reach this goal reliably. In this paper, the authors present a comparative evaluation of control methodologies and user interfaces for a robotic-aided magnetic platform for capsule endoscopy, controlled through human-robot cooperative and teleoperated control algorithms. A detailed statistical analysis of significant control parameters was performed: teleoperated control is the more reliable control approach, and a serial kinematic haptic device results as the most suitable control interface to perform effective robotic-aided endoscopic procedures.