Runtime reconfigurable architectures based on Field-Programmable Gate Arrays (FPGAs) allow areaand power-efficient acceleration of complex applications. However, being manufactured in latest semiconductor process technologies, FPGAs are increasingly prone to aging effects, which reduce the reliability and lifetime of such systems. Aging mitigation and fault tolerance techniques for the reconfigurable fabric become essential to realize dependable reconfigurable architectures. This article presents an accelerator diversification method that creates multiple configurations for runtime reconfigurable accelerators that are diversified in their usage of Configurable Logic Blocks (CLBs). In particular, it creates a minimal number of configurations such that all single-CLB and some multi-CLB faults can be tolerated. For each fault we ensure that there is at least one configuration that does not use that CLB. Second, a novel runtime accelerator placement algorithm is presented that exploits the diversity in resource usage of these configurations to balance the stress imposed by executions of the accelerators on the reconfigurable fabric. By tracking the stress due to accelerator usage at runtime, the stress is balanced both within a reconfigurable region as well as over all reconfigurable regions of the system. The accelerator placement algorithm also considers faulty CLBs in the regions and selects the appropriate configuration such that the system maintains a high performance in presence of multiple permanent faults. Experimental results demonstrate that our methods deliver up to 3.7× higher performance in presence of faults at marginal runtime costs and 1.6× higher MTTF than state-ofthe-art aging mitigation methods.

SRAM-based reconfigurable architectures are susceptible to soft-errors. Accelerators in the reconfigurable fabric need to be protected by fault tolerance techniques such as modular redundancy and scrubbing. However, blindly applying these techniques to all accelerators leads to suboptimal performance due to overprotection.

Aging effects in nano-scale CMOS circuits impair the reliability and Mean Time to Failure (MTTF) of embedded systems. Especially for FPGAs that are manufactured in the latest technology node, aging is amajor concern. We introduce the first cross-layer aging-aware placement method for accelerators in FPGA-based runtime reconfigurable architectures. It optimizes stress distribution by accelerator placement at runtime, i.e. to which reconfigurable region an accelerator shall be reconfigured. Additionally, it optimizes logic placement at synthesis time to diversify the resource usage of individual accelerators, i.e. which CLBs of a reconfigurable region shall be used by an accelerator. Both layers together balance the intra- and inter-region stress induced by the application workload at negligible performance cost. Experimental results show significant reduction of maximum stress of up to 64% and 35%, which leads to up to 177% and 14% MTTF improvement relative to state-of-the-art methods w.r.t. HCI and BTI aging, respectively.

We show in this paper that multi-layer dependability is an indispensable way to cope with the increasing amount of technology-induced dependability problems that threaten to proceed further scaling. We introduce the definition of multi-layer dependability and present our design flow within this paradigm that seamlessly integrates techniques starting at circuit layer all the way up to application layer and thereby accounting for ASIC-based architectures as well as for reconfigurable-based architectures. At the end, we give evidence that the paradigm of multi-layer dependability bears a large potential for significantly increasing dependability at reasonable effort.

Soft errors are a reliability threat for reconfigurable systems implemented with SRAM-based FPGAs. They can be handled through fault tolerance techniques like scrubbing and modular redundancy. However, selecting these techniques statically at design or compile time tends to be pessimistic and prohibits optimal adaptation to changing soft error rate at runtime.

Runtime reconfigurable architectures based on Field-Programmable Gate Arrays (FPGAs) are attractive for realizing complex applications. However, being manufactured in latest semiconductor process technologies, FPGAs are increasingly prone to aging effects, which reduce the reliability of such systems and must be tackled by aging mitigation and application of fault tolerance techniques. This paper presents module diversification, a novel design method that creates different configurations for runtime reconfigurable modules. Our method provides fault tolerance by creating the minimal number of configurations such that for any faulty Configurable Logic Block (CLB) there is at least one configuration that does not use that CLB. Additionally, we determine the fraction of time that each configuration should be used to balance the stress and to mitigate the aging process in FPGA-based runtime reconfigurable systems. The generated configurations significantly improve reliability by fault-tolerance and aging mitigation.

Field-programmable gate array (FPGA)-based reconfigurable systems allow the online adaptation to dynamically changing runtime requirements. The reliability of FPGAs, being manufactured in latest technologies, is threatened by soft errors, as well as aging effects and latent defects. To ensure reliable reconfiguration, it is mandatory to guarantee the correct operation of the reconfigurable fabric. This can be achieved by periodic or on-demand online testing. This paper presents a reliable system architecture for runtime-reconfigurable systems, which integrates two nonconcurrent online test strategies: preconfiguration online tests (PRET) and postconfiguration online tests (PORT). The PRET checks that the reconfigurable hardware is free of faults by periodic or on-demand tests. The PORT has two objectives: It tests reconfigured hardware units after reconfiguration to check that the configuration process completed correctly and it validates the expected functionality. During operation, PORT is used to periodically check the reconfigured hardware units for malfunctions in the programmable logic. Altogether, this paper presents PRET, PORT, and the system integration of such test schemes into a runtime-reconfigurable system, including the resource management and test scheduling. Experimental results show that the integration of online testing in reconfigurable systems incurs only minimum impact on performance while delivering high fault coverage and low test latency.

FPGA-based reconfigurable systems allow the online adaptation to dynamically changing runtime requirements. However, the reliability of modern FPGAs is threatened by latent defects and aging effects. Hence, it is mandatory to ensure the reliable operation of the FPGA's reconfigurable fabric. This can be achieved by periodic or on-demand online testing. In this paper, a system-integrated, transparent structural online test method for runtime reconfigurable systems is proposed. The required tests are scheduled like functional workloads, and thorough optimizations of the test overhead reduce the performance impact. The proposed scheme has been implemented on a reconfigurable system. The results demonstrate that thorough testing of the reconfigurable fabric can be achieved at negligible performance impact on the application.