Abstract-This article accompanies a video that presents a bimanual haptic device composed of two DLR/KUKA Light weight Robot (LWR) arms. The LWRs have similar dimensions to human arms, and can be operated in torque and position control mode at an update rate of 1kHz. The two robots are mounted behind the user, such that the intersecting workspace of the robots and the human arms becomes maximal. In order to enhance user interaction, various hand interfaces and additional tactile feedback devices can be used together with the robots. The presented system is equipped with a thorough safety architecture that assures safe operation for human and robot. Additionally, sophisticated control strategies improve performance and guarantee stability. The introduced haptic system is well suited for versatile applications in remote and virtual environments, especially for large unsealed movements.

It contradicts the human's expectations when humanoid robots move awkwardly during manipulation tasks. The unnatural motion may be caused by awkward start or goal configurations or by probabilistic path planning processes that are often used. This paper shows that the choice of an arm's target configuration strongly effects planning time and how human-like a planned path appears. Human-like goal configurations are found using a criterion from ergonomics research. The knowledge which pose of the Tool Center Point (TCP) can be reached in a natural manner is encapsulated in a restricted reachability map for the robot arm.

This paper presents the graspability map, a novel approach to represent for a particular object the positions and orientations that a given mechanical hand can adopt to achieve a force closure precision grasp. The algorithm is based on the intersection between the fingertip workspaces and the object, plus the verification of a necessary condition for force closure grasps. The maps are computed offline and can be used for comparing the grasp capabilities of different mechanical hands with respect to some benchmark objects. The maps have also potential applications in online grasp and manipulation planning.

In virtual assembly verification or remote maintenance tasks, bimanual haptic interfaces play a crucial role in successful task completion. This paper proposes a method for objectively comparing how well a haptic interface covers the reachable workspace of human arms. Two system configurations are analyzed for a recently introduced haptic device that is based on two DLR-KUKA light weight robots: the standard configuration, where the device is opposite the human operator, and the ergonomic configuration, where the haptic device is mounted behind the human operator. The human operator directly controls the robotic arms using handles. The analysis is performed using a representation of the robot arm workspace. The merits of restricting the comparisons to the most significant regions of the human workspace are discussed. Using this method, a greater workspace correspondence for the ergonomic configuration was shown.

In autonomous bimanual operation of a robot, parallelized planning and execution of a task is essential. Elements of a task have different functional and spatial relationships. They may depend on each other and have to be executed in a specific order or they may be independent and their order can be determined freely. Consequently, individual actions can be planned and executed in parallel or not. In a proof of concept, this paper shows that the structure of a task and its mapping onto subordinate planners can significantly influence planning speed and task execution. Independent tasks are planned using two parallel path planners. Dependent tasks are planned using one path planner for both arms. Using a simple, yet expandable experimentation scenario, the resulting recommendations for parameterizing path planners are verified on a humanoid robot. For execution on the real robot a violation of the rigid body model used in path planners had to be addressed.

Research on humanoid robots for use in servicing tasks, e.g. fetching and delivery, attracts steadily more interest. With “Rollin' Justin” a mobile robotic system and research platform is presented that allows sophisticated control algorithms and dexterous manipulation. This video gives an overview of the mobile humanoid robotic system “Rollin' Justin” with special emphasis on mechanical design features, control issues and high-level system capabilities such as human robot interaction.

For mobile manipulators envisioned in home environments a kitchen scenario provides a challenging testbed for numerous skills. Diverse manipulation actions are required, e.g. simple pick and place for moving objects and constrained motions for opening doors and drawers. The robot kinematics and link limits however are restrictive. Therefore especially a constrained trajectory will not be executable from arbitrary placements of the mobile manipulator. A two stage approach is presented to position a mobile manipulator to execute constrained linear trajectories as needed for opening drawers. In a first stage, a representation of a robot armpsilas reachable workspace is computed. Pattern recognition techniques are used to find regions in the workspace representation where these trajectories are possible. A set of trajectories results. In the second stage mobile manipulator placements are computed and the corresponding trajectories are checked for collisions. Compared to a brute force search through the workspace, the success rate of finding a mobile manipulator placement can be increased from 2% to 70%.

This video presents a humanoid two-arm system developed as a research platform for studying dexterous two-handed manipulation. The system is based on the modular DLR-Lightweight-Robot-III and the DLR-Hand-II. Two arms and hands are combined with a three degrees-of-freedom movable torso and a visual system to form a complete humanoid upper body. The diversity of the system is demonstrated by showing the mechanical design, several control concepts, the application of rapid prototyping and hardware-in-the-loop (HIL) development as well as two-handed manipulation experiments and the integration of path planning capabilities.

Humans have at some point learned an abstraction of the capabilities of their arms. By just looking at the scene they can decide which places or objects they can easily reach and which are difficult to approach. Possessing a similar abstraction of a robot arm's capabilities in its workspace is important for grasp planners, path planners and task planners. In this paper, we show that robot arm capabilities manifest themselves as directional structures specific to workspace regions. We introduce a representation scheme that enables to visualize and inspect the directional structures. The directional structures are then captured in the form of a map, which we name the capability map. Using this capability map, a manipulator is able to deduce places that are easy to reach. Furthermore, a manipulator can either transport an object to a place where versatile manipulation is possible or a mobile manipulator or humanoid torso can position itself to enable optimal manipulation of an object.

Autonomous service robots have to recognize and interpret their environment to be able to interact with it. This paper focuses on service tasks such as serving a glass of water where a humanoid two-arm-system has to acquire an object from the scene. A task planner should be able to autonomously discern the necessary actions to solve the task. In the process, a path planner can be used to compute motion sequences to execute these actions. To plan trajectories, the path planner requires a pair of configurations, the start and the goal configuration of the robot, to be provided e.g. by a task planner. This paper proposes a method to autonomously find the goal configurations necessary to acquire objects from the scene and thus makes an attempt to bridge the gap between task planning and path planning. The method determines where to grasp an object by analyzing the scene and the influence of obstacles on the intended grasp location. For the case where the goal object can not be grasped due to obstructing obstacles, a solution is proposed

Proper navigation of walking machines in unstructured terrain requires the knowledge of the spatial position and orientation of the robot. There are many approaches for localization of mobile robots in outdoor environment, but their application to walking robots is rather rare. In particular, middle sized robots like LAURON III don’t provide the possibility to carry large or heavy sensors. Due to many degrees of freedom of walking robots the localization task becomes a even more complex challenge. This paper discusses the problem, presents a method of resolution and describes the first steps towards a localization system for the six-legged walking robot LAURON III.

This paper addresses the problem of localization and map construction by a mobile robot in an indoor environment. Instead of trying to build high-fidelity geometric maps, we focus on constructing topological maps, as they are lees sensitive to poor odometry estimates and position errors. We propose a method for incrementally building topological maps for a robot, which uses a panoramic camera to obtain images at various locations along its path and uses the features it tracks in the images to update the topological map. The method is very general and does not require the environment to have uniquely distinctive features.