Demonstration venue · read-only. Every page can be browsed; the buttons that would change it are switched off. Create an account to run TaxoReview on your own data. A simulation from public publication records: the people listed were not invited and did not agree to review.
? Tutorial for this page

Mutsunori Igarashi

dblp:76/3564 · DBLP profile ↗
← Back
3ranked-venue papers
1as first author
0since 2021 · last 2000
—ORCID · none

Domains — the database's venue-derived domains; a paper can count in several

Systems, architecture and hardware · 3 · 1 first-authorApplied, interdisciplinary, general and emerging computing · 1 · 1 first-author

Expertise — from the expertise taxonomy: the topics of the expert's papers under the CCF categories. A weight counts papers with recency: 1 for a paper about the topic, 0.3 when the topic is its context, halved every five years.

Computer architecture, parallel and distributed computing, and storage systems
1 paper
Energy-efficient computing · 70% Integrated circuit design · 30%

Topics — the 4 heaviest of 4, each with the papers that count most for it

TopicWeightPapersLastEvidence papers
Energy-efficient computing › voltage scaling
adaptive voltage scaling
0.011998
Design Methodology of Ultra Low-Power MPEG4 Codec Core Exploiting Voltage Scaling Techniques · DAC 1998
Integrated circuit design
low-power circuit design
0.011998
Design Methodology of Ultra Low-Power MPEG4 Codec Core Exploiting Voltage Scaling Techniques · DAC 1998
Energy-efficient computing
voltage scaling
0.011998
Design Methodology of Ultra Low-Power MPEG4 Codec Core Exploiting Voltage Scaling Techniques · DAC 1998
Energy-efficient computing
power management
0.011998
Design Methodology of Ultra Low-Power MPEG4 Codec Core Exploiting Voltage Scaling Techniques · DAC 1998

Methods — techniques the papers use, named apart from their topics

voltage scaling · 0.0
YearPublicationVenuePosition
2000 Low-power design methodology and applications utilizing dual supply voltages
abstract
This paper describes a gate-level power minimization methodology using dual supply voltages.Gates and flip-flops off the critical paths are made to operate at the reduced supply voltage to save power.Core technologies are dual-V DD circuit synthesis and P&R.We give a brief overview on existing low-power EDA technologies as background and discuss advantages and challenges of the dual-VDD approach.Through real design examples, we will show that the approach reduces power effectively while keeping the performance at ne gligible area overhead.
Kimiyoshi Usami, Mutsunori Igarashi
ASP-DAC2
1998 Design Methodology of Ultra Low-Power MPEG4 Codec Core Exploiting Voltage Scaling Techniques
abstract
This paper describes a fully automated low-power design methodology in which three different voltage-scaling techniques are combined together. Supply voltage is scaled globally, selectively, and adaptively while keeping the performance. This methodology enabled us to design an MPEG4 codec core with 58% less power than the original in three week turn-around-time.
Kimiyoshi Usami, Mutsunori Igarashi, Takashi Ishikawa, Masahiro Kanazawa, Masafumi Takahashi, Mototsugu Hamada, Hideho Arakida, Toshihiro Terazawa, Tadahiro Kuroda
DAC2
1997 A low-power design method using multiple supply voltages
abstract
We present a low-power design method that utilizes the multiple supply voltages. The proposed method reduces the power consumption of random logic circuits by 47% on the average, with up to 15% area overhead, by the combination of Clustered Voltage Scaling (CVS) and by Row optimized Power Supply (RRPS) scheme. By the CVS scheme, the optimal netlist, that uses the minimized number of the level converters and the maximized number of the low Vdd gates under the timing constraints, is generated. To avoid the wiring resource consumption and the increase of the interconnect delay caused by the layout constraints of the multiple-supply-voltage design, a new power bus wiring scheme called RRPS is proposed. The proposed method is applied to a media processor chip Mpact/sup TM/ and achieved the above mentioned results. In this paper, the emphasis is put on the interrelation between the generation of the two-supply-voltage netlist with the CVS scheme and the layout technology, such as the power supply scheme and the placement of the multiple-supply-voltage gates. The clocking scheme for the multiple supply voltages is also discussed.
Mutsunori Igarashi, Kimiyoshi Usami, Kazutaka Nogami, Fumihiro Minami, Yukio Kawasaki, Takahiro Aoki, Midori Takano, Chiharo Mizuno, Takashi Ishikawa, Masahiro Kanazawa, Shinji Sonoda, Makoto Ichida, Naoyuki Hatanaka
ISLPED1