When a small object in a hand-held device moves periodically and prismatically with asymmetric acceleration (strong in one direction and weak in the other), the holder typically experiences the kinesthetic illusion of being pushed or pulled continuously by the held device. We investigated this perceptual effect for its potential application to a hand-held, non-grounded, haptic device that can convey a sense of a continuous translational force in one direction, which is a yet missing tile in haptics research. A one-degree of freedom haptic device based on two symmetric slider-crank mechanism was constructed to convert the single-speed rotational cyclic movement of a motor into asymmetric translational cyclic movement with asymmetric acceleration and to cancel unwanted side acceleration. We verified our previous results with the haptic device and investigated the effect of the gross weight of the device on force perception.

Common wheeled robots face many difficulties when traveling in complex environments, especially its incapability to climb over obstacles higher than its wheel radius. Many alterations were made to these robots to allow them to travel in rough terrains or conquer high obstacles, nevertheless, most designs are complex in nature and lost several original wheeled robot advantages by gaining others. In this paper, we propose a novel wheeled type robot with variable structure functionality. It is designed with simple structure consisting of three main robot parts, the main body, the left and right wheel-arm units. The robot could achieve five locomotion modes that allows the robot to travel in various environments and climb over high obstacles. Moreover, the fast-speed advantage in flat floor condition that common wheeled robot originally hold is still remained. The confirmation of the effectiveness of the robot's maneuverability is shown by several experimental results

We have developed a new type of master hand to control a dexterous slave robot hand for telexistence. Our master hand has two features. One is a compact exoskeleton mechanism called “circuitous joint,” which covers wide workspace of an operator’s finger. Another is the encounter-type force feedback that enables unconstrained motion of the operator’s finger and natural contact sensation. In this paper, the mechanism and control method of our master hand are introduced and experimental master-slave finger control is conducted.

It is difficult to generate the action of stably pinching paper or needle, etc. with the finger tips, which is one of the important functions to be realized by humanoid robot hands. In this paper, therefore, the authors firstly propose a small-sized and light-weight robotic hand designed according to the concept of extracting required minimum motor functions and implementing them to the robot, and secondly propose a new robot hand capable of properly realizing a pinching motion with finger tips, by adding the minimum required degree of supplementary freedom which can be realized only with a machine. In the new robot hand, the authors mainly focus on additions of the degrees of freedom of independent motion to the terminal fingers and the degree of freedom of twisting motion to the thumb. Experiments were carried out to investigate force control characteristics of the finger tip joint. The results showed that providing the finger tip with rich force control performance even with weak force is effective for securing delicate control characteristics in a humanoid robot hand.