Analyzing high-resolution data from smart meters (SMs) enables the identification of internal household activities and even personal user information, posing a significant privacy threat to energy consumers. Thus, preserving SM’s privacy is paramount. While data tampering methods offer a solution, they often lead to issues like inaccurate state estimation and complex billing. To address this, we propose demand-side energy management leveraging rechargeable batteries (RB) and solar panels. This is because larger RBs are costly and environmentally unfriendly. Thus, we prioritize the use of green energy sources, such as solar panels, minimizing RB’s reliance on enhanced consumer privacy. Strategically managing loads with solar panels and grid energy sales achieves cost-effective privacy. Considering realistic off-peak and peak energy consumption periods renders our approach practical. Theoretical analysis and simulations demonstrate the superiority of our method over existing state-of-the-art approaches.

Digital watermarking serves as an effective approach for safeguarding speech signal copyrights, achieved by the incorporation of ownership information into the original signal and its subsequent extraction from the watermarked signal. While traditional watermarking methods can embed and extract watermarks successfully when the watermarked signals are not exposed to severe alterations, these methods cannot withstand attacks such as de-synchronization. In this work, we introduce a novel transformer-based framework designed to enhance the imperceptibility and robustness of speech watermarking. This framework incorporates encoders and decoders built on multi-scale transformer blocks to effectively capture local and long-range features from inputs, such as acoustic features extracted by Short-Time Fourier Transformation (STFT). Further, a deep neural networks (DNNs) based generator, notably the Transformer architecture, is employed to adaptively embed imperceptible watermarks. These perturbations serve as a step for simulating noise, thereby bolstering the watermark robustness during the training phase. Experimental results show the superiority of our proposed framework in terms of watermark imperceptibility and robustness against various watermark attacks. When compared to the currently available related techniques, the framework exhibits an eightfold increase in embedding rate. Further, it also presents superior practicality with scalability and reduced inference time of DNN models.

Copyright protection in multimedia protection distribution is a challenging problem. To protect multimedia data, many watermarking methods have been proposed in the literature. However, most of them cannot be used effectively in a multimedia distribution network (MDN) as they are not designed to support multi-layer watermark embedding. Multi-layer watermarking mechanisms were developed to protect multimedia data across different layers in an MDN. However, in those mechanisms, we need to trust the entities in the MDN, such as regional and country distributors. To overcome this potential drawback, in this article, we propose a novel privacy protection mechanism for MDNs by combining the advantages of both blockchain and watermarking technologies. A specifically designed watermarking algorithm is used to link the copyright information with the audio file, while a novel blockchain-based smart contract mechanism is developed to enforce the proper functioning of each entity in the distribution network. Moreover, the new audio mechanism is computationally efficient. Although audio signals are used to show the effectiveness of the proposed mechanism, the proposed approach can easily be extended to other multimedia objects, such as an image. The validity of the proposed mechanism is demonstrated by our simulation results. The proposed mechanism can benefit multimedia production companies and other entities in the MDN.

Cost-friendly differential privacy (CDP) of smart meters can be preserved by an appropriate charging and discharging mechanism that uses rechargeable batteries (RBs) to generate Laplace distributed random noise. However, the existing CDP methods have several issues. First, the maximum discharge rate of an RB requires to vary with the maximal consumption of houses. Second, the probability of an RB to charge/discharge depends on the demand, regardless of the state-of-charge (SoC) of an RB. Third, in extreme SoC (near-empty or almost fully charged) of an RB, no noise added to the demand. To overcome these, we propose a mechanism in which a novel probability density function is designed to generate near Laplace distributed random noise. We also utilize a renewable energy source with small storage in cascade with an RB to enhance performance. Both theoretical analysis and simulations are performed to demonstrate the effectiveness of our proposed method.

Collusion attacks are considered to be challenging attacks in audio copyright protection. The traditional watermarking algorithms cannot identify the traitors when other attacks, such as desynchronization attacks, are applied with a collusion attack. Instead of tracing the traitors, in this paper we aim to tackle collusion attacks by removing the commercial value from the colluded copy, which will demotivate the attackers from launching collusion attacks. Since the commercial value of an audio signal is directly reflected by its perceptual quality, we propose a novel non-linear-echo generation (NLEG) based algorithm to significantly degrade the perceptual quality of the colluded copy by embedding a time delay sequence into the host signal. The proposed NLEG is also designed to be resilient to common signal processing attacks and desynchronization attacks. Furthermore, the proposed NLEG can be combined with other digital watermarking techniques to enhance its performance on protecting the copyright information. Experimental results show the validity of the proposed NLEG.

Due to the rapid growth of smart grids, use of smart meters (SMs) have increased in the recent days. The main problem with the use of SMs is that by observing the SMs reading, it is possible to infer the daily activities of the consumers. Therefore, protection of privacy is a major concern related to SMs. Using rechargeable batteries (RBs) is a popular method in protecting the privacy in SMs as these methods do not tamper with SM readings. The major problem in RB-based mechanism is that the energy management unit (EMU) cannot protect privacy, if the demand is lower or higher for a longer period. To overcome this problem, in this paper a heuristic method has been proposed by considering time varying target output load based on the three major properties of artificial fish swarm optimization algorithm. For the optimal choice of the time varying target output load, RB constraints as well as reduction of the average cost of energy have been considered in our proposed method. We have proposed two privacy preserving mechanisms for both offline and online scenarios. The proposed method preserves privacy while reducing the cost of energy. Simulation results show that the proposed method is able to provide privacy by overcoming the problem identified in the existing methods.

Usage of smart meters (SMs) have significantly increased in the recent days due to the advantages they offer. However, it is possible for an adversary to extract private information about a consumer by observing the SM readings. Therefore, it is important to protect the privacy of consumers using SMs. Among the SM privacy protection mechanisms, rechargeable battery (RB)-based mechanisms are preferred as they do not alter SM readings. The existing mechanisms cannot protect the privacy when the consumer energy usage is either low or high for a longer period. Furthermore, these mechanisms do not perform well in online scenario where the energy management unit (EMU) only knows the current and past consumer energy demands. To solve this problem, in this article, we proposed a novel online privacy protection mechanism to protect the privacy of SMs using a progressive average-based algorithm (PABA). The proposed PABA uses two uniquely designed algorithms to ensure protection of privacy and energy cost reduction during peak and off-peak periods. Moreover, an adaptive output smoothing technique is used to further enhance the privacy. Compared with the privacy protection mechanisms designed for tackling SM privacy, the proposed mechanism achieves higher amount of privacy while reducing the energy cost. The validity of the proposed privacy enhancement mechanism is demonstrated by simulation results.

In a smart health system, patients' location information is periodically sent to hospitals and this information helps hospitals to provide improved health care services. The location information together with time stamp alone can reveal a patient's private information, such as person's life style, places frequently visited by the person, and personal interests. Thus, it is important to protect the location privacy of a patient. In the existing privacy protection mechanisms, trusted third party (TTP) and location perturbation techniques are used. However, in TTP-based mechanism, an adversary who illegally gets access to TTP server will have access to the private location information. On the other hand, in location perturbation technique, utility of the location information is significantly compromised. In this paper, we propose a location privacy protection mechanism in which location privacy is protected while maintaining the utility of the location data. In the proposed mechanism, a main processing unit attached to a patient's body generates the perturbed location by considering the distance between the patient's location and the preidentified patient's sensitive locations. This adaptive generation of perturbed location, removes the necessity to trust other parties while preserving the privacy and utility of the location data. The validity of the proposed mechanism is demonstrated by simulation results.

Copyright protection of audio data is a serious problem and spread spectrum (SS) based audio watermarking is a promising technology to tackle this problem. Although a number of SS-based audio watermarking methods have been reported in the literature, they cannot achieve high robustness and embedding capacity at the same time. In this paper, we propose a novel SS-based audio watermarking method that can embed a large number of watermark bits into an audio signal without compromising the robustness against common attacks. Compared with the existing audio watermarking methods, the proposed one is especially robust against severe noise addition and compression attacks, while achieving high embedding capacity. Moreover, the new audio watermarking method is computationally efficient. The validity of the proposed SS-based audio watermarking method is demonstrated by simulation results.

A multilayer watermarking system is a system that is able to embed watermarks to a host media signal repeatedly in an overlaying manner, without incurring troubles in extracting the watermarks in each layer. In this paper, we present a novel patchwork-based audio watermarking algorithm that can embed and extract watermark bits successfully in such a multilayer framework. In the proposed method, a new watermark embedding algorithm is designed to ensure that the embedded watermarks in a certain layer do not affect the detection of watermarks in other layers. Adding multiple layers of watermark bits inevitably reduces the perceptual quality. However, to minimize the perceptual quality degradation in multilayer watermarking, the audio fragments for watermark embedding are selected from a set of specially arranged discrete cosine transform coefficients of the host audio signal. Watermark embedding is achieved by modifying the mean values of selected sample fragments. With the use of an embedding error buffer, the proposed system can withstand a wide range of common attacks. To maintain the balance between the perceptual quality and robustness, watermark embedding strength is adjusted according to the specific layer used. The proposed multilayer scheme ensures the independence of the processing in different layers. The effectiveness of the proposed system is demonstrated and verified by extensive simulation results.

Audio watermarking is a promising technology for copyright protection of audio data. Built upon the concept of spread spectrum (SS), many SS-based audio watermarking methods have been developed, where a pseudonoise (PN) sequence is usually used to introduce security. A major drawback of the existing SS-based audio watermarking methods is their low embedding capacity. In this paper, we propose a new SS-based audio watermarking method which possesses much higher embedding capacity while ensuring satisfactory imperceptibility and robustness. The high embedding capacity is achieved through a set of mechanisms: embedding multiple watermark bits in one audio segment, reducing host signal interference on watermark extraction, and adaptively adjusting PN sequence amplitude in watermark embedding based on the property of audio segments. The effectiveness of the proposed audio watermarking method is demonstrated by simulation examples.

Cropping and random bending are two common attacks in image watermarking. In this paper we propose a novel image-watermarking method to deal with these attacks, as well as other common attacks. In the embedding process, we first preprocess the host image by a Gaussian low-pass filter. Then, a secret key is used to randomly select a number of gray levels and the histogram of the filtered image with respect to these selected gray levels is constructed. After that, a histogram-shape-related index is introduced to choose the pixel groups with the highest number of pixels and a safe band is built between the chosen and nonchosen pixel groups. A watermark-embedding scheme is proposed to insert watermarks into the chosen pixel groups. The usage of the histogram-shape-related index and safe band results in good robustness. Moreover, a novel high-frequency component modification mechanism is also utilized in the embedding scheme to further improve robustness. At the decoding end, based on the available secret key, the watermarked pixel groups are identified and watermarks are extracted from them. The effectiveness of the proposed image-watermarking method is demonstrated by simulation examples.

Reversible watermarking has merged over the past few years as a promising solution for copyright protection, especially for applications like remote sensing, medical imaging and military applications which require lossless recovery of the host media. In this paper, we aim to extend the additive interpolation error expansion technique in [16]. We will consider the human visual system (HVS) to improve the embedding rate while maintaining the image visual quality. To this end, the just noticeable difference (JND) is used to embed more watermark bits. The experimental results show that the proposed algorithm can improve the embedding rate while preserving the image visual quality.

This paper presents a novel adaptive safe-band for quantization based audio watermarking methods, aiming to improve robustness. Considerable number of audio watermarking methods have been developed using quantization based techniques. These techniques are generally vulnerable to signal processing attacks. For these conventional quantization based techniques, robustness can be marginally improved by choosing larger step sizes at the cost of significant perceptual quality degradation. We first introduce fixed size safe-band between two quantization steps to improve robustness. This safe-band will act as a buffer to withstand certain types of attacks. Then we further improve the robustness by adaptively changing the size of the safe-band based on the audio signal feature used for watermarking. Compared with conventional quantization based method and the fixed size safe-band based method, the proposed adaptive safe-band based quantization method is more robust to attacks. The effectiveness of the proposed technique is demonstrated by simulation results.

Developing a watermarking method that is robust to cropping attack and random bending attacks (RBAs) is a challenging task in image watermarking. In this paper, we propose a histogram-based image watermarking method to tackle with both cropping attack and RBAs. In this method first the gray levels are divided into groups. Secondly the groups for watermark embedding are selected according to the number of pixels in them, which makes this method fully based on the histogram shape of the original image and adaptive to different images. Then the watermark bits are embedded by modifying the histogram of the selected groups. Since histogram shape is insensitive to cropping and independent from pixel positions, the proposed method is robust to cropping attack and RBAs. Besides, it also has high robustness against other common attacks. Experimental results demonstrate the effectiveness of the proposed method.

This paper presents a patchwork-based audio watermarking method to resist de-synchronization attacks such as pitch-scaling, time-scaling, and jitter attacks. At the embedding stage, the watermarks are embedded into the host audio signal in the discrete cosine transform (DCT) domain. Then, a set of synchronization bits are implanted into the watermarked signal in the logarithmic DCT (LDCT) domain. At the decoding stage, we analyze the received audio signal in the LDCT domain to find the scaling factor imposed by an attack. Then, we modify the received signal to remove the scaling effect, together with the embedded synchronization bits. After that, watermarks are extracted from the modified signal. Simulation results show that at the embedding rate of 10 bps, the proposed method achieves 98.9% detection rate on average under the considered de-synchronization attacks. At the embedding rate of 16 bps, it can still obtain 94.7% detection rate on average. So, the proposed method is much more robust to de-synchronization attacks than other patchwork watermarking methods. Compared with the audio watermarking methods designed for tackling de-synchronization attacks, our method has much higher embedding capacity.

This paper presents a novel patchwork-based embedding and decoding scheme for digital audio watermarking. At the embedding stage, an audio segment is divided into two subsegments and the discrete cosine transform (DCT) coefficients of the subsegments are computed. The DCT coefficients related to a specified frequency region are then partitioned into a number of frame pairs. The DCT frame pairs suitable for watermark embedding are chosen by a selection criterion and watermarks are embedded into the selected DCT frame pairs by modifying their coefficients, controlled by a secret key. The modifications are conducted in such a way that the selection criterion used at the embedding stage can be applied at the decoding stage to identify the watermarked DCT frame pairs. At the decoding stage, the secret key is utilized to extract watermarks from the watermarked DCT frame pairs. Compared with existing patchwork watermarking methods, the proposed scheme does not require information of which frame pairs of the watermarked audio signal enclose watermarks and is more robust to conventional attacks.

This work proposes a novel dual-channel time-spread echo method for audio watermarking, aiming to improve robustness and perceptual quality. At the embedding stage, the host audio signal is divided into two subsignals, which are considered to be signals obtained from two virtual audio channels. The watermarks are implanted into the two subsignals simultaneously. Then the subsignals embedded with watermarks are combined to form the watermarked signal. At the decoding stage, the watermarked signal is split up into two watermarked subsignals. The similarity of the cepstra corresponding to the watermarked subsignals is exploited to extract the embedded watermarks. Moreover, if a properly designed colored pseudonoise sequence is used, the large peaks of its auto-correlation function can be utilized to further enhance the performance of watermark extraction. Compared with the existing time-spread echo-based schemes, the proposed method is more robust to attacks and has higher imperceptibility. The effectiveness of our method is demonstrated by simulation results.

In audio watermarking, the robustness against pitch-scaling attack, is one of the most challenging problems. In this paper, we propose an algorithm, based on traditional time-spread(TS) echo hiding based audio watermarking to solve this problem. In TS echo hiding based watermarking, pitch-scaling attack shifts the location of pseudonoise (PN) sequence which appears in the cepstrum domain. Thus, position of the peak, which occurs after correlating with PN-sequence changes by an un-known amount and that causes the error. In the proposed scheme, we replace PN-sequence with unit-sample sequence and modify the decoding algorithm in such a way it will not depend on a particular point in cepstrum domain for extraction of watermark. Moreover proposed algorithm is applied to stereo audio signals to further improve the robustness. Experimental results illustrate the effectiveness of the proposed algorithm against pitch-scaling attacks compared to existing methods. In addition to that proposed algorithm also gives better robustness against other conventional signal processing attacks.

This paper proposes an effective pseudonoise (PN) sequence and the corresponding decoding function for time-spread echo-based audio watermarking. Different from the traditional PN sequence used in time-spread echo hiding, the proposed PN sequence has two features. Firstly, the echo kernel resulting from the new PN sequence has frequency characteristics with smaller magnitudes in perceptually significant region. This leads to higher perceptual quality. Secondly, the correlation function of the new PN sequence has three times more large peaks than that of the existing PN sequence. Based on this feature, we propose a new decoding function to improve the robustness of time-spread echo-based audio watermarking. The effectiveness of the proposed PN sequence and decoding function is illustrated by theoretical analysis, simulation examples, and listening test.

This paper deals with the problem of digital audio watermarking using echo hiding. Compared to many other methods for audio watermarking, echo hiding techniques exhibit advantages in terms of relatively simple encoding and decoding, and robustness against common attacks. The low security issue existing in most echo hiding techniques is overcome in the time-spread echo method by using pseudonoise (PN) sequence as a secret key. In this paper, we propose a novel sequence, in conjunction with a new decoding function, to improve the imperceptibility and the robustness of time-spread echo based audio watermarking. Theoretical analysis and simulation examples illustrate the effectiveness of the proposed sequence and decoding function.