Lightweight integer compression algorithms play an important role in in-memory database systems to tackle the growing gap between processor speed and main memory bandwidth. Thus, there is a large number of algorithms to choose from, while different algorithms are tailored to different data characteristics. As we show in this paper, with the availability of byte-addressable non-volatile random-access memory (NVRAM), a novel type of main memory with specific characteristics increases the overall complexity in this domain. In particular, we provide a detailed evaluation of state-of-the-art lightweight integer compression schemes and database operations on NVRAM and compare it with DRAM. Furthermore, we reason about possible deployments of middle- and heavyweight approaches for better adaptation to NVRAM characteristics. Finally, we investigate a combined approach where both volatile and non-volatile memories are used in a cooperative fashion that is likely to be the case for hybrid and NVRAM-centric database systems.

NeMeSys is a NUMA-aware graph pattern processing engine, which uses the Near Memory Processing paradigm to allow for high scalability. With modern server systems incorporating an increasing amount of main memory, we can store graphs and compute analytical graph algorithms like graph pattern matching completely in-memory. Our system blends state-of-the-art approaches from the transactional database world together with graph processing principles. We demonstrate, that graph pattern processing - standalone and workloads - can be controlled by leveraging different partitioning strategies, applying Bloom filter based messaging optimization and, given performance constraints, can save energy by applying frequency scaling of CPU cores.

With the explosion of the number of compute nodes, the bottleneck of future computing systems lies in the network architecture connecting the nodes. Addressing the bottleneck requires replacing current backplane-based network topologies. We propose to revolutionize computing electronics by realizing embedded optical waveguides for onboard networking and wireless chip-to-chip links at 200-GHz carrier frequency connecting neighboring boards in a rack. The control of novel rate-adaptive optical and mm-wave transceivers needs tight interlinking with the system software for runtime resource management.

Non-volatile random-access memory (NVRAM) is about to hit the market and will require significant changes to the architecture of in-memory database systems. Since such hybrid DRAM-NVRAM database systems will keep the primary data solely persistent in the NVRAM, efficient replication mechanisms need to be considered to prevent data losses and to guarantee high availability in case of NVDIMM failures. In this paper, we argue for a software-based replication approach and present compute node-local mechanisms to provide the building blocks for an efficient NVRAM replication with a low latency and throughput penalty. Within our evaluation, we measured up to 10x less overhead for our optimized replication mechanisms compared to the basic replication mechanism of the Intel persistent memory development kit (PMDK).

The ever-increasing demand for scalable database systems is limited by their energy consumption, which is one of the major challenges in research today. While existing approaches mainly focused on transaction-oriented disk-based database systems, we are investigating and optimizing the energy consumption and performance of data-oriented scale-up in-memory database systems that make heavy use of the main power consumers, which are processors and main memory. We give an in-depth energy analysis of a current mainstream server system and show that modern processors provide a rich set of energy-control features, but lack the capability of controlling them appropriately, because of missing application-specific knowledge. Thus, we propose the Energy-Control Loop (ECL) as an DBMS-integrated approach for adaptive energy-control on scale-up in-memory database systems that obeys a query latency limit as a soft constraint and actively optimizes energy efficiency and performance of the DBMS. The ECL relies on adaptive workload-dependent energy profiles that are continuously maintained at runtime. In our evaluation, we observed energy savings ranging from 20% to 40% for a real-world load profile.

The ever-increasing demand for scalable database systems is limited by their energy consumption, which is one of the major challenges in research today. While existing approaches mainly focused on transaction-oriented disk-based database systems, we are investigating and optimizing the energy consumption and performance of data-oriented scale-up in-memory database systems that make heavy use of the main power consumers, which are processors and main memory. In this demo, we present energy-utility functions as an approach for enabling the operating system to improve the energy efficiency of scalable in-memory database systems. Our highly interactive demo setup mainly allows attendees to switch between multiple DBMS workloads and watch in detail how the system responds by adapting the hardware configuration appropriately.

In today’s data-driven world, economy and research depend on the analysis of empirical datasets to guide decision making. These applications often encompass a rich variety of data types and special purpose processing models. We believe, the database system of the future will integrate flexible processing and storage of a variety of data types in a scalable and integrated end-to-end solution. In this paper, we propose a database system architecture that is designed from the core to support these goals. In the discussion we will especially focus on the multi-domain programming concept of the proposed architecture that exploits domain specific knowledge to guide compiler based optimization.

Energy awareness of database systems has emerged as a critical research topic, since energy consumption is becoming a major limiter for their scalability. Recent energy-related hardware developments trend towards offering more and more configuration opportunities for the software to control its own energy consumption. Existing research so far mainly focused on leveraging this configuration spectrum to find the most energy-efficient configuration for specific operators or entire queries. In this demo, we introduce the concept of energy elasticity and propose the energy-control loop as an implementation of this concept. Energy elasticity refers to the ability of software to behave energy-proportional and energy-efficient at the same time while maintaining a certain quality of service. Thus, our system does not draw the least energy possible but the least energy necessary to still perform reasonably. We demonstrate our overall approach using a rich interactive GUI to give attendees the opportunity to learn more about our concept.

Hardware vendors constantly decrease the feature sizes of integrated circuits to obtain better performance and energy efficiency. Due to cosmic rays, low voltage or heat dissipation, hardware -- both processors and memory -- becomes more and more unreliable as the error rate increases. From a database perspective bit flip errors in main memory will become a major challenge for modern in-memory database systems, which keep all their enterprise data in volatile, unreliable main memory. Although existing hardware error control techniques like ECC-DRAM are able to detect and correct memory errors, their detection and correction capabilities are limited. Moreover, hardware error correction faces major drawbacks in terms of acquisition costs, additional memory utilization, and latency. In this paper, we argue that slightly increasing data redundancy at the right places by incorporating context knowledge already increases error detection significantly. We use the B-Tree -- as a widespread index structure -- as an example and propose various techniques for online error detection and thus increase its overall reliability. In our experiments, we found that our techniques can detect more errors in less time on commodity hardware compared to non-resilient B-Trees running in an ECC-DRAM environment. Our techniques can further be easily adapted for other data structures and are a first step in the direction of resilient database systems which can cope with unreliable hardware.

Power and cooling costs are some of the highest costs in data centers today, which make improvement in energy efficiency crucial. Energy efficiency is also a major design point for chips that power whole ranges of computing devices. One important goal in this area is energy proportionality, arguing that the system's power consumption should be proportional to its performance. Currently, a major trend among server processors, which stems from the design of chips for mobile devices, is the inclusion of advanced power management techniques, such as dynamic voltage-frequency scaling, clock gating, and turbo modes.

The key task of database systems is to efficiently manage large amounts of data. A high query throughput and a low query latency are essential for the success of a database system. Lately, research focused on exploiting hardware features like superscalar execution units, SIMD, or multiple cores to speed up processing. Apart from these software optimizations for given hardware, even tailor-made processing circuits running on FPGAs are built to run mostly stateless query plans with incredibly high throughput. A similar idea, which was already considered three decades ago, is to build tailor-made hardware like a database processor. Despite their superior performance, such application-specific processors were not considered to be beneficial because general-purpose processors eventually always caught up so that the high development costs did not pay off. In this paper, we show that the development of a database processor is much more feasible nowadays through the availability of customizable processors. We illustrate exemplarily how to create an instruction set extension for set-oriented database primitives. The resulting application-specific processor provides not only a high performance but it also enables very energy-efficient processing. Our processor requires in various configurations more than 960x less energy than a high-end x86 processor while providing the same performance.

The ever-growing demand for more computing power forces hardware vendors to put an increasing number of multiprocessors into a single server system, which usually exhibits a non-uniform memory access (NUMA). In-memory database systems running on NUMA platforms face several issues such as the increased latency and the decreased bandwidth when accessing remote main memory. To cope with these NUMA-related issues, a DBMS has to allow flexible data partitioning and data placement at runtime.

Modern database systems have to process huge amounts of data and should provide results with low latency at the same time. To achieve this, data is nowadays typically hold completely in main memory, to benefit of its high bandwidth and low access latency that could never be reached with disks. Current in-memory databases are usually column-stores that exchange columns or vectors between operators and suffer from a high tuple reconstruction overhead. In this demonstration proposal, we present DexterDB, which implements our novel prefix tree-based processing model that makes indexes the first-class citizen of the database system. The core idea is that each operator takes a set of indexes as input and builds a new index as output that is indexed on the attribute requested by the successive operator. With that, we are able to build composed operators, like the multi-way-select-join-group. Such operators speed up the processing of complex OLAP queries so that DexterDB outperforms state-of-the-art in-memory databases. Our demonstration focuses on the different optimization options for such query plans. Hence, we built an interactive GUI that connects to a DexterDB instance and allows the manipulation of query optimization parameters. The generated query plans and important execution statistics are visualized to help the visitor to understand our processing model.

With the availability of large main memory capacities, in-memory index structures have become an important component of modern data management platforms. Current research even suggests index-based query processing as an alternative or supplement for traditional tuple-at-a-time processing models. However, while simple sequential scan operations can fully exploit the high bandwidth provided by main memory, indexes are mainly latency bound and spend most of their time waiting for memory accesses.

Frequent-itemset mining is an important part of data mining. It is a computational and memory intensive task and has a large number of scientific and statistical application areas. In many of them, the datasets can easily grow up to tens or even several hundred gigabytes of data. Hence, efficient algorithms are required to process such amounts of data. In the recent years, there have been proposed many efficient sequential mining algorithms, which however cannot exploit current and future systems providing large degrees of parallelism. Contrary, the number of parallel frequent-itemset mining algorithms is rather small and most of them do not scale well as the number of threads is largely increased. In this paper, we present a highly-scalable mining algorithm that is based on the well-known Apriori algorithm; it is optimized for processing very large datasets on multiprocessor systems. The key idea of pcApriori is to employ a modified producer--consumer processing scheme, which partitions the data during processing and distributes it to the available threads. We conduct many experiments on large datasets. pcApriori scales almost linear on our test system comprising 32 cores.

As databases accumulate growing amounts of data at an increasing rate, adaptive indexing becomes more and more important. At the same time, applications and their use get more agile and flexible, resulting in less steady and less predictable workload characteristics. Being inert and coarse-grained, state-of-the-art index tuning techniques become less useful in such environments. Especially the full-column indexing paradigm results in many indexed but never queried records and prohibitively high storage and maintenance costs. In this paper, we present Self-Managing Indexes, a novel, adaptive, fine-grained, autonomous indexing infrastructure. In its core, our approach builds on a novel access path that automatically collects useful index information, discards useless index information, and competes with its kind for resources to host its index information. Compared to existing technologies for adaptive indexing, we are able to dynamically grow and shrink our indexes, instead of incrementally enhancing the index granularity.

Growing main memory capacities and an increasing number of hardware threads in modern server systems led to fundamental changes in database architectures. Most importantly, query processing is nowadays performed on data that is often completely stored in main memory. Despite of a high main memory scan performance, index structures are still important components, but they have to be designed from scratch to cope with the specific characteristics of main memory and to exploit the high degree of parallelism. Current research mainly focused on adapting block-optimized B+-Trees, but these data structures were designed for secondary memory and involve comprehensive structural maintenance for updates.

As databases accumulate growing amounts of data at an increasing rate, adaptive indexing becomes more and more important. At the same time, applications and their use get more agile and flexible, resulting in less steady and less predictable workload characteristics. Being inert and coarse-grained, state-of-the-art index tuning techniques become less useful in such environments. Especially the full-column indexing paradigm results in lot of indexed but never queried data and prohibitively high memory and maintenance costs. In our demonstration, we present Self-Managing Indexes, a novel, adaptive, fine-grained, autonomous indexing infrastructure. In its core, our approach builds on a novel access path that automatically collects useful index information, discards useless index information, and competes with its kind for resources to host its index information. Compared to existing technologies for adaptive indexing, we are able to dynamically grow and shrink our indexes, instead of incrementally enhancing the index granularity. In the demonstration, we visualize performance and system measures for different scenarios and allow the user to interactively change several system parameters.