Wireless low-power, multi-hop networks are exposed to numerous attacks also due to their resource-constraints. While there has been a lot of work on intrusion detection systems for such networks, most of these studies have considered only a few topologies, scenarios and attacks. One of the reasons for this shortcoming is the lack of sufficient data traces that are required to train many machine learning algorithms. In contrast to other wireless networks, multi-hop networks do not contain one entity that can capture all the traffic which makes it more difficult to acquire such traces. In this paper we present Multi-Trace. Multi-Trace extends the Cooja simulator with multi-level tracing facilities that enable data logging at different levels while maintaining a global time. We discuss the opportunities that traces generated by Multi-Trace enable for researchers interested in input for their machine learning algorithms. We present experiments that show the efficiency with which Multi-Trace generates traces. We expect Multi-Trace to be a useful tool for the research community.

This paper presents a low-resolution infrared thermal dataset of people and thermal objects, such as a working laptop, in indoor environments. The dataset was collected by a far infrared thermal camera (32x24 pixels), which can capture the position and shape information of thermal objects without privacy issues that enable trustworthy computer vision applications. The dataset consists of 1770 thermal images with high-quality annotation collected from an indoor room with around 15°C. We implemented a privacy-preserving human detection method and trained a multiple object detection (MOD) model based on the dataset. The human detection method reaches 90.3% accuracy. On the other hand, the MOD model achieved 56.8% mean average precision (mAP). Researchers can implement interesting applications based on our dataset, for example, privacy-preserving people counting systems, occupancy estimation systems for smart buildings, and social distance detectors.

Standard protocols for wireless Internet of Things (IoT) communication must be energy-efficient in order to prolong the lifetimes of IoT devices. Two energy-saving strategies for wireless communication are prevalent within the IoT domain: 1) sleepy devices and 2) radio duty cycling. In this paper, we conduct a comprehensive evaluation as to what types of application scenarios benefit the most from either type of energy-saving strategy. We select the lightweight machine to machine (LwM2M) protocol for this purpose because it operates atop the standard constrained application protocol, and has support for sleepy devices through its Queue Mode. We implement the Queue Mode at both the server side and client side, and design enhancements of Queue Mode to further improve the performance. In our experimental evaluation, we compare the performance and characteristics of Queue Mode with that of running LwM2M in a network stack with the standard time-slotted channel hopping as the duty cycling medium access control protocol. By analyzing the results with the support of an empirical model, we find that each energy-saving strategy has different advantages and disadvantages depending on the scenario and traffic pattern. Hence, we also produce guidelines that can help developers to select the appropriate energy-saving strategy based on the application scenario.

A wide gap exists between the state of the art in developing Wireless Sensor Network (WSN) software and current practices concerning the design, execution, and maintenance of business processes. WSN software is most often developed based on low-level OS abstractions, whereas business process development leverages high-level languages and tools. This state of affairs places WSNs at the fringe of industry. The makeSense system addresses this problem by simplifying the integration of WSNs into business processes. Developers use BPMN models extended with WSN-specific constructs to specify the application behavior across both traditional business process execution environments and the WSN itself, which is to be equipped with application-specific software. We compile these models into a high-level intermediate language-also directly usable by WSN developers-and then into OS-specific deployment-ready binaries. Key to this process is the notion of meta-abstraction, which we define to capture fundamental patterns of interaction with and within the WSN. The concrete realization of meta-abstractions is application-specific; developers tailor the system configuration by selecting concrete abstractions out of the existing codebase or by providing their own. Our evaluation of makeSense shows that i) users perceive our approach as a significant advance over the state of the art, providing evidence of the increased developer productivity when using makeSense; ii) in large-scale simulations, our prototype exhibits an acceptable system overhead and good scaling properties, demonstrating the general applicability of makeSense; and, iii) our prototype-including the complete tool-chain and underlying system support-sustains a real-world deployment where estimates by domain specialists indicate the potential for drastic reductions in the total cost of ownership compared to wired and conventional WSN-based solutions.

The industrial adoption of wireless sensor networks (WSNs) is hampered by two main factors. First, there is a lack of integration of WSNs with business process modeling languages and back-ends. Second, programming WSNs is still challenging as it is mainly performed at the operating system level. To this end, we provide makeSense: a unified programming framework and a compilation chain that, from high-level business process specifications, generates code ready for deployment on WSN nodes.

Interoperability is essential for the commercial adoption of wireless sensor networks. However, existing sensor network architectures have been developed in isolation and thus interoperability has not been a concern. Recently, IP has been proposed as a solution to the interoperability problem of low-power and lossy networks (LLNs), considering its open and standards-based architecture at the network, transport, and application layers. We present two complete and interoperable implementations of the IPv6 protocol stack for LLNs, one for Contiki and one for TinyOS, and show that the cost of interoperability is low: their performance and overhead is on par with state-of-the-art protocol stacks custom built for the two platforms. At the same time, extensive testbed results show that the ensemble performance of a mixed network with nodes running the two interoperable stacks depends heavily on implementation decisions and parameters set at multiple protocol layers. In turn, these results argue that the current industry practice of interoperability testing does not cover the crucial topic of the performance and motivate the need for generic techniques that quantify the performance of such networks and configure their run-time behavior.

Interoperability is key to widespread adoption of sensor network technology, but interoperable systems have traditionally been difficult to develop and test. We demonstrate an interoperable system development and performance diagnosis environment in which different systems, different software, and different hardware can be simulated in a single network configuration. This allows both development, verification, and performance diagnosis of interoperable systems. Estimating the performance is important since even when systems interoperate, the performance can be sub-optimal, as shown in our companion paper that has been conditionally accepted for SenSys 2011.

RPL is the IETF candidate standard for IPv6 routing in low-power wireless sensor networks. We present the first experimental results of RPL which we have obtained with our ContikiRPL implementation. Our results show that Tmote Sky motes running IPv6 with RPL routing have a battery lifetime of years, while delivering 0.6 packets per second to a sink node.

We demonstrate low-power IP-based sensor networks by showing a system that interacts with the sensor network using a RESTful web service interface. The sensor data is displayed with overlaid 3D graphics on top of a live camera feed, so-called augmented reality. The augmented reality application is built with off-the-shelf components with no sensor network-specific code. The IP-based sensor network runs the Contiki operating system.

Power consumption is one of the most important factors in wireless sensor network research, but most simulators do not provide support for visualizing the power consumption of an entire sensor network. This makes it hard to develop, debug, and understand mechanisms and protocols based on power-saving mechanisms. We present Cooja TimeLine, an extension to Contiki's Cooja network simulator, that visualizes radio traffic and radio usage of sensor networks. Cooja TimeLine makes is possible to visually see the behavior of low-power protocols and mechanisms thereby increasing the understanding of the behavior of sensor networks. We see this as an important tool for the field moving forward.

Low-power networked devices, such as sensors and actuators, are becoming a vital part of our everyday infrastructure. Being networked, the continued development of these systems needs involvement from the networking community. We present a framework for simulation, experimentation, and evaluation of routing mechanisms for low-power IPv6 networking. The framework provides a detailed simulation environment for low-power routing mechanisms, and allows the system to be directly uploaded to a physical testbed for experimental measurements.

Power consumption is of utmost concern in sensor networks. Researchers have several ways of measuring the power consumption of a complete sensor network, but they are typically either impractical or inaccurate. To meet the need for practical and scalable measurement of power consumption of sensor networks, we have developed a cycle-accurate simulator, called COOJA/MSPsim, that enables live power estimation of systems running on MSP430 processors. This demonstration shows the ease of use and the power measurement accuracy of COOJA/MSPsim. The demo setup consists of a small sensor network and a laptop. Beside gathering software-based power measurements from the motes, the laptop runs COOJA/MSPsim to simulate the same network.We visualize the power consumption of both the simulated and the real sensor network, and show that the simulator produces matching results.

Building automation systems (BAS) are used to control and improve indoor building climate at reduced costs. By integrating BAS with wireless sensor networks, the need for cabling can be removed, and both installation and operational costs significantly reduced. Furthermore, temporary BAS installations are made possible. By implementing and evaluating the open BAS standard BACnet on resource-constrained sensor nodes we show that integrating existing standard BAS protocols with wireless sensor networks is feasible.

In this paper we present the design and implemen tation of a small-scale marine sensor network. The network monitors the temperature in the Baltic Sea on different heights from the water surface down to the bottom. Unlike many other wireless sensor networks, this network contains both a wired and a wireless part. One of the major challenges is that the network is hard to access after its deployment and hence both hard- and software must be robust and reliable. We also present the design of an advanced buoy system featuring a diving unit that achieves a better vertical resolution and discuss remaining challenges of sensor networking in aquatic environments.

Simulators for wireless sensor networks are a valuable tool for system development. However, current simulators can only simulate a single level of a system at once. This makes system development and evolution difficult since developers cannot use the same simulator for both high-level algorithm development and low-level development such as device-driver implementations. We propose cross-level simulation, a novel type of wireless sensor network simulation that enables holistic simultaneous simulation at different levels. We present an implementation of such a simulator, COOJA, a simulator for the Contiki sensor node operating system. COOJA allows for simultaneous simulation at the network level, the operating system level, and the machine code instruction set level. With COOJA, we show the feasibility of the cross-level simulation approach

From experience with wireless sensor networks it has become apparent that dynamic reprogramming of the sensor nodes is a useful feature. The resource constraints in terms of energy, memory, and processing power make sensor network reprogramming a challenging task. Many different mechanisms for reprogramming sensor nodes have been developed ranging from full image replacement to virtual machines.We have implemented an in-situ run-time dynamic linker and loader that use the standard ELF object file format. We show that run-time dynamic linking is an effective method for reprogramming even resource constrained wireless sensor nodes. To evaluate our dynamic linking mechanism we have implemented an application-specific virtual machine and a Java virtual machine and compare the energy cost of the different linking and execution models. We measure the energy consumption and execution time overhead on real hardware to quantify the energy costs for dynamic linkin.Our results suggest that while in general the overhead of a virtual machine is high, a combination of native code and virtual machine code provide good energy efficiency. Dynamic run-time linking can be used to update the native code, even in heterogeneous networks.