Recurrent or sustained awkward body postures are among the most frequently cited risk factors to the development of work-related musculoskeletal disorders (MSDs). To prevent workers from adopting harmful configurations but also to guide them toward more ergonomic ones, wearable haptic devices may be the ideal solution. In this paper, a vibrotactile unit, called ErgoTac, and a slide-and-squeeze unit, called CUFF, were evaluated in a limbs postural correction setting. Their capability of providing single-joint (shoulder or knee) and multi-joint (shoulder and knee at once) guidance was compared in twelve healthy subjects, using quantitative task-related metrics and subjective quantitative evaluation. An integrated environment was also built to ease communication and data sharing between the involved sensor and feedback systems. Results show good acceptability and intuitiveness for both devices. ErgoTac appeared as the suitable feedback device for the shoulder, while the CUFF may be the effective solution for the knee. This comparative study, although preliminary, was propaedeutic to the potential integration of the two devices for effective whole-body postural corrections, with the aim to develop a feedback and assistive apparatus to increase workers’ awareness about risky working conditions and therefore to prevent MSDs.

Intrinsic Tactile Sensing (ITS) is a well-established technique, relying on force/torque and geometric surface description to find contact centroids. The method works well for rigid surfaces. However, finding a solution for deformable surfaces is an open issue. This work presents two solutions to extend ITS to deformable surfaces, relying on force-deformation characteristics of the surface under exploration: (i) a closed-form approach that calculates the contact centroid using standard ITS, but on a shrunk geometry approximating the deformed surface; (ii) an iterative procedure that takes into account soft surface deformation, and force/torque equilibrium to minimize a cost function. We have tested both using ellipsoid silicone specimens, with different softness levels and indented along different directions. Both linear and quadratic fitting for the force-indentation behavior were employed. The two methods have distinct advantages and limitations. However, a combination of two methods, using one to produce the initial guess for the other, turns out to be very effective. Indeed, in our validation this solution showed convergence under 1ms, attaining errors lower than 1 mm. The proposed approaches were implemented in a ROS-based toolbox, integrating both solutions.

Recently, the avenue of adaptable, soft robotic hands has opened simplified opportunities to grasp different items; however, the potential of soft end effectors (SEEs) is still largely unexplored, especially in human-robot interaction. In this paper, we propose, for the first time, a simple touch-based approach to endow a SEE with autonomous grasp sensory-motor primitives, in response to an item passed to the robot by a human (human-to-robot handover). We capitalize on human inspiration and minimalistic sensing, while hand adaptability is exploited to generalize grasp response to different objects. We consider the Pisa/IIT SoftHand (SH), an under-actuated soft anthropomorphic robotic hand, which is mounted on a robotic arm and equipped with Inertial Measurement Units (IMUs) on the fingertips. These sensors detect the accelerations arisen from contact with external items. In response to a contact, the hand pose and closure are planned for grasping, by executing arm motions with hand closure commands. We generate these motions from human wrist poses acquired from a human maneuvering the SH to grasp an object from a table. We obtained 86% of successful grasps, considering many objects passed to the SH in different manners. We also tested our techniques in preliminary experiments, where the robot moved to autonomously grasp objects from a surface. Results are positive and open interesting perspectives for soft robotic manipulation.