This paper presents a simple method to control the motion of a quadruped robot in unknown rough terrains using a full dynamic model. First, using typical stiffness control method, the four legs' behavior is approximated to 3D spring damper systems. By this way, we can easily derive the dynamic equations of motion in Cartesian space. Based on these equations, a control strategy is proposed to obtain the asymptotical stability of the system. In addition, a reflex signal is also introduced to control the rotational disturbance of the robot body. Finally, dynamic simulation of a quadruped walking robot is performed on several unknown rough terrains to verify the proposed method.

Improvement of the adaptability of a quadruped robot in rough terrain is studied in this paper. First, the position and posture of the body of the robot are adjusted to maximize the number of choices for foot placement of the next swing leg. The more choices the robot has to select the next suitable foothold, the better it will be to cope with rough terrain. Second, an effective foothold search algorithm is developed. The foothold search algorithm not only tries to find a valid foothold but also tries to maintain high adaptability of the robot. For implementing the algorithm, some new concepts such as potential swing direction, complementary kinematic margin and elliptical set of candidate footholds are also proposed. The effectiveness of this procedure in improving the adaptability of a quadruped robot moving in challenging terrain is verified in both simulation and experiment.

Aiming to real easy application in several quadruped robot platforms, this paper introduces a new method of modeling central pattern generators (CPG) to control quadruped locomotion. Not only can this new model generate all the primary gaits of quadrupeds stably with limit cycle effect, but it also has the ability of tuning the periodic outputs with arbitrary waveforms. The core idea is to combine strong points of two mathematical tools: Fourier series and Recurrent neural networks. In addition, a new biomimetic controller is also introduced using the proposed CPG model and several reflex modules. Finally, dynamic simulations are performed to validate the efficiency of the proposed controller.

In this paper, we propose a method of sensing outdoor environments for a walking and climbing robot. The proposed method ensures the realtime perception of the surface geometry by integrating a range and a gyroscope with a novel arrangement of the sensors. In addition, a gait planning algorithm based on the sensing method is presented. The algorithm runs fast since it is simple, and the rich information from the sensing system helps the robot overcome the real environment, even an extremely complex one. The sensing system is implemented in a quadruped walking robot, called MRWALLSPECT IV and its effectiveness is proved experimentally.

In this paper, we introduce a wall climbing robotic system for visual inspection of man-made structures. The adhesion mechanism of our system consists of an impeller and two-layer suction seals which provide sufficient adhesion forces for supporting the robot body on the non-smooth vertical wall and horizontal ceiling by generating pressure difference between the inside of the pressure chamber and the ambient environment. A comprehensive study is performed on the dynamic fluid modeling of the adhesion mechanism and the adhesion force is controlled by adjusting the pressure inside of the chamber. In addition, stable differential-driving locomotion on non-smooth surface are achieved by adapting a suspension mechanism for each wheel. A wall climbing robot, called LARVA, is successfully developed and its effectiveness of locomotion is verified with experiments on non-smooth vertical wall and horizontal ceiling surface.

As a major human sensory function, the implementation of the tactile sensation for the human-machine interface has been one of the core research interests for long time. In this paper, an innovative tactile display device based on the soft actuator technology is presented. Using electroactive polymer for the construction of the tactile display device, it can provide stimulation on the human skin without any additional electromechanical transmission. Softness and flexibility of the device structure, ease of fabrication, possibility for miniaturization, and low cost for mass production are the representative benefits of the presented device. Especially, the device application is open to many different purposes since the flexible structure offers the excellent adaptability to any contour of the human body. To prove its feasibility, a wearable device that can fit to the distal part of the human finger is presented and its performance is evaluated, experimentally.

In this paper, a new biomimetic control method for a quadruped walking robot is proposed. The method is derived by the observation of the gravity load receptor and stimulus- reaction mechanism of quadrupeds' locomotion, and the study of the stances on walking and energy efficiency. Though the controller is simple, it provides a useful framework for controlling a quadruped walking robot. In particular, by introducing a new rhythmic pattern generator the heavy computational burden to be paid on solving kinematics is relieved. The effectiveness of the proposed method is validated via a dynamic simulation and experimental works in a quadruped walking robot, called AiDIN(Artiflcial Digitigrade for Natural Environment).

Tactile sensation is one of the most important sensory functions for human perception of objects. Recently, there have been many technical challenges in the field of tactile sensing as well as tactile display. In this paper, we propose an innovative tactile display device based on soft actuator technology with electroactive polymer (EAP). This device offers advantageous features over existing devices with respect to intrinsic flexibility, softness, ease of fabrication and miniaturization, high power density, and cost effectiveness. In particular, it can be adapted to various geometric configurations because it possesses structural flexibility, so it can be worn on any part of the human body such as finger, palm, and arm etc. It can be extensively applied as a wearable tactile display, a Braille device for the visually disabled, and a human interface in the future. A new design of the flexible actuator is proposed and its basic operational principles are discussed. In addition, a tactile display device with 10times10 actuator array (100 actuator cells) is developed and its effectiveness is confirmed