Lower-limb wearable robots have been proposed as a means to augment or assist the wearer's natural performance, in particular, in the military and medical field. Previous research studies on human-robot interaction and biomechanics have largely been performed with rigid exoskeletons that add significant inertia to the lower extremities and provide constraints to the wearer's natural kinematics in both actuated and non-actuated degrees of freedom. Actuated lightweight soft exosuits minimize these effects and provide a unique opportunity to study human-robot interaction in wearable systems without affecting the subjects underlying natural dynamics. In this paper, we present the design and control of a reconfigurable multi-joint actuation platform that can provide biologically realistic torques to ankle, knee, and hip joints through lower extremity soft exosuits. Two different soft exosuits have been designed to deliver assistive forces through Bowden cable transmission to the ankle and hip joints. Through human subject experiments, it is demonstrated that with a real-time admittance controller, accurate force profile tracking can be achieved during walking. The average energy delivered to the test subject was calculated while walking at 1.25 m/s and actuated with 15% of the total torque required by the biological joints. The results show that the ankle joint received an average of 3.02J during plantar flexion and that the hip joint received 1.67J during flexion each gait cycle. The efficiency of the described suit and controller in transferring energy to the human biological joints is 70% for the ankle and 48% for the hip.

The field of wearable robotics is gaining momentum thanks to its potential application in rehabilitation engineering, assistive robotics, and power augmentation. These devices are designed to be used in direct contact with the user to aid with movement or increase the power of specific skeletal joints. The design of the so-called physical human-robot interface is critical, since it determines not only the efficacy of the robot but the kinematic compatibility of the device with the human skeleton and the degree of adaptation to different anthropometries as well. Failing to deal with these problems causes misalignments between the robot and the user joint. Axes misalignment leads to the impossibility of controlling the torque effectively transmitted to the user joint and causes undesired loading forces on articulations and soft tissues. In this paper, we propose a general analytical method for the design of exoskeletons able to assist human joints without being subjected to misalignment effects. This method is based on a kinetostatic analysis of a coupled mechanism (robot-human skeleton) and can be applied in the design of self-aligning mechanisms. The method is exemplified in the design of an assistive robotic chain for a two-degree-of-freedom (DOF) human articulation.

Estimation of the temporal derivatives of a noisy position signal is a ubiquitous problem in industrial and robotics engineering. Here, we propose a new approach to get velocity and acceleration estimates of cyclical/periodic signals near to steady-state regime, by using adaptive oscillators. Our method combines the advantages of introducing no delay, and filtering out the high-frequency noise. We expect this method to be useful in control applications requiring undelayed but smooth estimates of velocity and acceleration (e.g., velocity control and inverse dynamics) of quasi-periodic tasks (e.g., active vibration compensation, robot locomotion, and lower-limb movement assistance).

This paper presents the design and experimental testing of the robotic elbow exoskeleton NEUROBOTICS Elbow Exoskeleton (NEUROExos). The design of NEUROExos focused on three solutions that enable its use for poststroke physical rehabilitation. First, double-shelled links allow an ergonomic physical human-robot interface and, consequently, a comfortable interaction. Second, a four-degree-of-freedom passive mechanism, embedded in the link, allows the user's elbow and robot axes to be constantly aligned during movement. The robot axis can passively rotate on the frontal and horizontal planes 30° and 40°, respectively, and translate on the horizontal plane 30 mm. Finally, a variable impedance antagonistic actuation system allows NEUROExos to be controlled with two alternative strategies: independent control of the joint position and stiffness, for robot-in-charge rehabilitation mode, and near-zero impedance torque control, for patient-in-charge rehabilitation mode. In robot-in-charge mode, the passive joint stiffness can be changed in the range of 24-56 N·m/rad. In patient-in-charge mode, NEUROExos output impedance ranges from 1 N·m/rad, for 0.3 Hz motion, to 10 N·m/rad, for 3.2 Hz motion.

Inferring temporal derivatives (like velocity and acceleration) from a noisy position signal is a well-known challenge in control engineering, due to the intrinsic trade-off between noise filtering and estimation bandwidth. To tackle this problem, in this paper we propose a new approach specifically designed for periodic movements. This approach uses an adaptive oscillator as fundamental building block. It is a tool capable of synchronizing to a periodic input while learning its features (frequency, amplitude, ...) in dedicated state variables. Since the oscillator's input and output are perfectly synchronized during steady-state regime, a non-delayed estimate of the input temporal derivatives can be obtained simply by deriving the output analytical form. Pending a (quasi-)periodic input signal, these temporal derivatives are thus synchronized with the actual kinematics, while the signal bandwidth can be arbitrarily tuned by the intrinsic dynamics of the oscillator. We further validate this approach by developing an impedance-based strategy for assisting human walking in the LOPES lower-limb exoskeleton. Preliminary results with a single participant give rise to three main conclusions. First, our method indeed provides velocity and acceleration estimates of the participant's joint kinematics which are smoother and less delayed with respect to the actual kinematics than using a standard Kalman filter. Second, closing the human-robot loop with a high-gain impedance field depending on the acceleration is not possible with a Kalman filter approach, due to unstable dynamics. In contrast, our approach tolerates high gains (up to 70% of the nominal walking torque), showing its intrinsic stability. Finally, no clear benefit of the acceleration-dependent field with respect to a simpler position-dependent field is visible regarding the reduction of metabolic cost. This last result illustrates the challenge of designing sound assistive strategies for complex tasks like walking.

This paper introduces NEUROExos, an elbow powered exoskeleton for rehabilitation. The NEUROExos is provided with three novel characteristics which address the major problems arising in rehabilitation robotics. A double shell link structure allows for a comfortable human-robot interaction, while a 4-DOF passive mechanism gives a perfect kinematic compatibility with the user. Moreover, NEUROExos is powered by a variable impedance antagonistic actuator, which provides the exoskeleton with a software-controllable passive compliance. We present the main characteristics of the exoskeleton, with a focus on the actuation and control of the platform. Additionally, results on a healthy subject show the relevance of this design during a prototypical rehabilitation task.