Adapter trimming is an essential step for analyzing small RNA sequencing data, where reads are generally longer than target RNAs ranging from 18 to 30 bp. Most adapter trimming tools require adapter information as input. However, adapter information is hard to access, specified incorrectly, or not provided with publicly available datasets, hampering their reproducibility and reusability. Manual identification of adapter patterns from raw reads is labor-intensive and error-prone. Moreover, the use of randomized adapters to reduce ligation biases during library preparation makes adapter detection even more challenging. Here, we present FindAdapt, a Python package for fast and accurate detection of adapter patterns without relying on prior information. We demonstrated that FindAdapt was far superior to existing approaches. It identified adapters successfully in 180 simulation datasets with diverse read structures and 3,184 real datasets covering a variety of commercial and customized small RNA library preparation kits. FindAdapt is stand-alone software that can be easily integrated into small RNA sequencing analysis pipelines.

Illumina genotyping arrays have powered thousands of large-scale genome-wide association studies over the past decade. Yet, because of the tremendous volume and complicated genetic assumptions of Illumina genotyping data, processing and quality control (QC) of these data remain a challenge. Thorough QC ensures the accurate identification of single-nucleotide polymorphisms and is required for the correct interpretation of genetic association results. By processing genotyping data on > 100 000 subjects from >10 major Illumina genotyping arrays, we have accumulated extensive experience in handling some of the most peculiar scenarios related to the processing and QC of Illumina genotyping data. Here, we describe strategies for processing Illumina genotyping data from the raw data to an analysis ready format, and we elaborate on the necessary QC procedures required at each processing step. High-quality Illumina genotyping data sets can be obtained by following our detailed QC strategies.

SUMMARY: After the introduction of high-throughput sequencing, genotyping arrays continue to be a viable source for conducting large-scale genetic studies. Currently, Illumina is one of the largest genotyping array manufacturers. One technical issue that has always plagued the post-processing of Illumina genotyping array data is the strand definition. Against convention, Illumina uses their own definition of strand, which is inconsistent with the standard reference forward and reverse definition. This issue has been a major obstacle in the consistency of reporting, meta-analysis and correct interpretation of phenotype association results. To date, the strand issue has not been adequately addressed, prompting us to develop StrandScript, a tool that can convert all genotyping data generated from Illumina genotyping arrays to the reference forward strand. StrandScript works independently of the Illumina array version and is future proof for newer Illumina array designs. Furthermore, StrandScript can examine an Illumina genotyping array manifest file and can detect all problematic SNPs, including SNPs with wrong RS ID and SNPs with mismatched probe sequences. Here, we introduce StrandScript's design and development, and demonstrate its effectiveness using real genotyping data. AVAILABILITY AND IMPLEMENTATION: https://github.com/seasky002002/Strandscript. CONTACT: [email protected]. SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

BACKGROUND: Colorectal cancer (CRC) is one of the most common malignancies worldwide with poor prognosis. Studies have showed that abnormal microRNA (miRNA) expression can affect CRC pathogenesis and development through targeting critical genes in cellular system. However, it is unclear about which miRNAs play central roles in CRC's pathogenesis and how they interact with transcription factors (TFs) to regulate the cancer-related genes. RESULTS: To address this issue, we systematically explored the major regulation motifs, namely feed-forward loops (FFLs), that consist of miRNAs, TFs and CRC-related genes through the construction of a miRNA-TF regulatory network in CRC. First, we compiled CRC-related miRNAs, CRC-related genes, and human TFs from multiple data sources. Second, we identified 13,123 3-node FFLs including 25 miRNA-FFLs, 13,005 TF-FFLs and 93 composite-FFLs, and merged the 3-node FFLs to construct a CRC-related regulatory network. The network consists of three types of regulatory subnetworks (SNWs): miRNA-SNW, TF-SNW, and composite-SNW. To enhance the accuracy of the network, the results were filtered by using The Cancer Genome Atlas (TCGA) expression data in CRC, whereby we generated a core regulatory network consisting of 58 significant FFLs. We then applied a hub identification strategy to the significant FFLs and found 5 significant components, including two miRNAs (hsa-miR-25 and hsa-miR-31), two genes (ADAMTSL3 and AXIN1) and one TF (BRCA1). The follow up prognosis analysis indicated all of the 5 significant components having good prediction of overall survival of CRC patients. CONCLUSIONS: In summary, we generated a CRC-specific miRNA-TF regulatory network, which is helpful to understand the complex CRC regulatory mechanisms and guide clinical treatment. The discovered 5 regulators might have critical roles in CRC pathogenesis and warrant future investigation.

I1 Proceedings of the Fifteenth Annual UT- KBRIN Bioinformatics Summit 2016 Eric C. Rouchka, Julia H. Chariker, Benjamin J. Harrison, Juw Won Park P1 CC-PROMISE: Projection onto the Most Interesting Statistical Evidence (PROMISE) with Canonical Correlation to integrate gene expression and methylation data with multiple pharmacologic and clinical endpoints Xueyuan Cao, Stanley Pounds, Susana Raimondi, James Downing, Raul Ribeiro, Jeffery Rubnitz, Jatinder Lamba P2 Integration of microRNA-mRNA interaction networks with gene expression data to increase experimental power Bernie J Daigle, Jr. P3 Designing and writing software for in silico subtractive hybridization of large eukaryotic genomes Deborah Burgess, Stephanie Gehrlich, John C Carmen P4 Tracking the molecular evolution of Pax gene Nicholas Johnson; Chandrakanth Emani P5 Identifying genetic differences in thermally dimorphic and state specific fungi using in silico genomic comparison Stephanie Gehrlich, Deborah Burgess, John C Carmen P6 Identification of conserved genomic regions and variation therein amongst Cetartiodactyla species using next generation sequencing Kalpani De Silva, Michael P Heaton, Theodore S Kalbfleisch P7 Mining physiological data to identify patients with similar medical events and phenotypes Teeradache Viangteeravat, Rahul Mudunuri, Oluwaseun Ajayi, Fatih Şen, Eunice Y Huang P8 Smart brief for home health monitoring Mohammad Mohebbi, Luaire Florian, Douglas J Jackson, John F Naber P9 Side-effect term matching for computational adverse drug reaction predictions AKM Sabbir, Sally R Ellingson P10 Enrichment vs robustness: A comparison of transcriptomic data clustering metrics Yuping Lu, Charles A Phillips, Michael A Langston P11 Deep neural networks for transcriptome-based cancer classification Rahul K Sevakula, Raghuveer Thirukovalluru, Nishchal K. Verma, Yan Cui P12 Motif discovery using K-means clustering Mohammed Sayed, Juw Won Park P13 Large scale discovery of active enhancers from nascent RNA sequencing Jing Wang, Qi Liu, Yu Shyr P14 Computationally characterizing genomic pipelines and benchmarking results using GATK best practices on the high performance computing cluster at the University of Kentucky Xiaofei Zhang, Sally R Ellingson P15 Development of approaches enabling the identification of abnormal gene expression from RNA-Seq in personalized oncology Naresh Prodduturi, Gavin R Oliver, Diane Grill, Jie Na, Jeanette Eckel-Passow, Eric W Klee P16 Processing RNA-Seq data of plants infected with coffee ringspot virus Michael M Goodin, Mark Farman, Harrison Inocencio, Chanyong Jang, Jerzy W Jaromczyk, Neil Moore, Kelly Sovacool P17 Comparative transcriptomics of three Acinetobacter baumanii clinical isolates with different antibiotic resistance patterns Leon Dent, Mike Izban, Sammed Mandape, Shruti Sakhare, Siddharth Pratap, Dana Marshall P18 Metagenomic assessment of possible microbial contamination in the equine reference genome assembly M Scotty DePriest, James N MacLeod, Theodore S Kalbfleisch P19 Molecular evolution of cancer driver genes Chandrakanth Emani, Hanady Adam, Ethan Blandford, Joel Campbell, Joshua Castlen, Brittany Dixon, Ginger Gilbert, Aaron Hall, Philip Kreisle, Jessica Lasher, Bethany Oakes, Allison Speer, Maximilian Valentine P20 Biorepository Laboratory Information Management System Naga Satya V Rao Nagisetty, Rony Jose, Teeradache Viangteeravat, Robert Rooney, David Hains

MOTIVATION: The transition/transversion (Ti/Tv) ratio and heterozygous/nonreference-homozygous (het/nonref-hom) ratio have been commonly computed in genetic studies as a quality control (QC) measurement. Additionally, these two ratios are helpful in our understanding of the patterns of DNA sequence evolution. RESULTS: To thoroughly understand these two genomic measures, we performed a study using 1000 Genomes Project (1000G) released genotype data (N=1092). An additional two datasets (N=581 and N=6) were used to validate our findings from the 1000G dataset. We compared the two ratios among continental ancestry, genome regions and gene functionality. We found that the Ti/Tv ratio can be used as a quality indicator for single nucleotide polymorphisms inferred from high-throughput sequencing data. The Ti/Tv ratio varies greatly by genome region and functionality, but not by ancestry. The het/nonref-hom ratio varies greatly by ancestry, but not by genome regions and functionality. Furthermore, extreme guanine + cytosine content (either high or low) is negatively associated with the Ti/Tv ratio magnitude. Thus, when performing QC assessment using these two measures, care must be taken to apply the correct thresholds based on ancestry and genome region. Failure to take these considerations into account at the QC stage will bias any following analysis. CONTACT: [email protected] SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

Background Characterizing genetic diversity is crucial for reconstructing human evolution and for understanding the genetic basis of complex diseases; however, human population genetics are very complicated. Previously, we proved that based on the Hardy-Weinberg equilibrium, the heterozygous vs. non-reference homozygous single nucleotide polymorphism (SNP) ratio (het/nonref-hom) is two [1]. Later, we found that this ratio is race dependent, with African being the most genetically diverse race and Asian being the most homozygous [2]. This observation prompted us to conduct further study to understand the reasoning behind this diversity.

BACKGROUND: Allergy involves a series of complex reactions and factors that contribute to the development of the disease and triggering of the symptoms, including rhinitis, asthma, atopic eczema, skin sensitivity, even acute and fatal anaphylactic shock. Prediction and evaluation of the potential allergenicity is of importance for safety evaluation of foods and other environment factors. Although several computational approaches for assessing the potential allergenicity of proteins have been developed, their performance and relative merits and shortcomings have not been compared systematically. RESULTS: To evaluate and improve the existing methods for allergen prediction, we collected an up-to-date definitive dataset consisting of 989 known allergens and massive putative non-allergens. The three most widely used allergen computational prediction approaches including sequence-, motif- and SVM-based (Support Vector Machine) methods were systematically compared using the defined parameters and we found that SVM-based method outperformed the other two methods with higher accuracy and specificity. The sequence-based method with the criteria defined by FAO/WHO (FAO: Food and Agriculture Organization of the United Nations; WHO: World Health Organization) has higher sensitivity of over 98%, but having a low specificity. The advantage of motif-based method is the ability to visualize the key motif within the allergen. Notably, the performances of the sequence-based method defined by FAO/WHO and motif eliciting strategy could be improved by the optimization of parameters. To facilitate the allergen prediction, we integrated these three methods in a web-based application proAP, which provides the global search of the known allergens and a powerful tool for allergen predication. Flexible parameter setting and batch prediction were also implemented. The proAP can be accessed at http://gmobl.sjtu.edu.cn/proAP/main.html. CONCLUSIONS: This study comprehensively evaluated sequence-, motif- and SVM-based computational prediction approaches for allergens and optimized their parameters to obtain better performance. These findings may provide helpful guidance for the researchers in allergen-prediction. Furthermore, we integrated these methods into a web application proAP, greatly facilitating users to do customizable allergen search and prediction.

The workflow technology handing workflow exceptions in the workflow management system (WFMS) was relatively weak. Through the analysis of the causes of the workflow exceptions, I propose a workflow exception handling system (WFEHS) which can deal with the foreseeable and unforeseeable workflow exceptions. It mainly consists of two subsystems, one is a subsystem for exception warning and the other one is a subsystem for exception handling. The former mainly forecasts the exceptions which may occur in WFMS, the latter is used for the exceptions handlings which contain the causes and the solutions of the exceptions. WFEHS has a unique method for tracking and handling exceptions. This paper presents some new concepts which contain impact factor, the intercommunion of the active nodes' operational information, the influence value of the operator, the judgment of loop's attribute and others. They are good bases for the tracking and handling exceptions. So WFEHS will play a very important role in the hierarchical modeling workflow management system.

Current methods for querying XML data streams are mostly based on events filtering techniques. It is unavoidable for the query systems to adopt an event filter to process the incoming XML tags. It is well known that during the filtering, some data items have to be buffered before the filter can make the proper decision for adopting strategies to deal with them. Furthermore, for a single filter system, the buffer size often increases exponentially in the real application. Lots of work both theoretically and empirically, has been done to dissolve or depress that exponential explosion, but it still remains an active research topic. Considering the fast development of computer supported collaboration, we propose a new multi-filters collaborative querying technique to process XML data streams. We show that the multi-filters collaboration can effectively share and reduce the filtering space consumption if some XML document and query constraints can be satisfied. Deploying our multi-filters collaboration technique, the querying systems together can break the limitation of the concurrency lower bound, an important theoretic lower bound within XML data streams research field. The empirical study shown in this paper demonstrates that our multi-filters collaboration outperforms the limitation of the concurrency lower bound.