Manycore architectures are a promising direction for single-chip performance. They typically use in-order cores and caches as building blocks and can produce good performance on regular applications. However, on irregular applications, they have low core utilization due to data-dependent control-flow and memory access.

Traditional supercomputers have focused on dense computation performance as exemplified by HPL. Graph processing applications differ with extreme irregularity ($10^{9}$imbalance in skewed, real-world graphs) that produces unpredictable work, parallelism, memory access, and communication. Together, these make scalable performance and programming difficult. We describe the UpDown system architecture, co-designed for irregular graph computations. UpDown provides efficient fine-grained thread invocations ($\sim$10 instructions), direct messaging (no network interface card) for scalable local and global messaging, and split-transaction memory operations that enable extremely high memory bandwidth. Combined with architectural support for global addressing and an aggressive network design, these UpDown features enable direct exploitation of edge and vertex parallelism, using it to deliver breakthrough graph processing performance and programmability. We evaluate the performance of the UpDown system using a challenging suite of graph applications (Pagerank, Breadth-first Search, Triangle Counting, Partial Match, etc). For a single-node, results show 100-fold performance advantage over multicore CPUs. Compared to today's fastest scalable parallel computers UpDown achieves 1000-fold performance increases. UpDown delivers these levels of performance with high-level programmability, these programs directly express vertex-edge parallelism which UpDown exploits directly in hardware.

Side-channel analysis (SCA) attacks pose a major threat to embedded systems due to their ease of accessibility. Realising SCA resilient cryptographic algorithms on embedded systems under tight intrinsic constraints, such as low area cost, limited computational ability, etc., is extremely challenging and often not possible. We propose a seamless and effective approach to realise a generic countermeasure against SCA attacks. XDIVINSA, an extended diversifying instruction agent, is introduced to realise the countermeasure at the microarchitecture level based on the combining concept of diversified instruction set extension (ISE) and hardware diversification. XDIVINSA is developed as a lightweight co-processor that is tightly coupled with a RISC-V processor. The proposed method can be applied to various algorithms without the need for software developers to undertake substantial design efforts hardening their implementations against SCA. XDIVINSA has been implemented on the SASEBO G-III board which hosts a Kintex-7 XC7K160T FPGA device for SCA mitigation evaluation. Experimental results based on non-specific t-statistic tests show that our solution can achieve leakage mitigation on the power side channel of different cryptographic kernels, i.e., Speck, ChaCha20, AES, and RSA with an acceptable performance overhead compared to existing countermeasures.

The confluence of technology trends and economics has reincarnated computer architecture and specifically, software-hardware co-design. We are entering a new era of a completely open ecosystem, from applications to chips and everything in between. The software-hardware co-design of supercomputers for tomorrow requires flexible tools today that will take us to the Exascale and beyond. The MareNostrum Experimental Exascale Platform (MEEP) addresses this by proposing a flexible FPGA-based emulation platform, designed to explore hardware-software co-designs for future RISC-V supercomputers. This platform is part of an open ecosystem, allowing its infrastructure to be reused in other projects. MEEP's inaugural emulated system will be a RISC- V based self-hosted HPC vector and systolic array accelerator, with a special aim at efficient data movement. Early development stages for such an architecture require fast, scalable and easy to modify simulation tools, with the right granularity and fidelity, enabling rapid design space exploration. Being a part of MEEP, this paper introduces Coyote, a new open source, execution-driven simulator based on the open source RISC- VISA and which can provide detailed insights at various levels and granularities. Coyote focuses on data movement and the modelling of the memory hierarchy of the system, which is one of the main hurdles for high performance sparse workloads, while omitting lower level details. As a result, performance evaluation shows that Coyote achieves an aggregate simulation of up to 6 MIPS when modelling up to 128 cores. This enables the fast comparison of different designs for future RISC- V based HPC architectures.

Program obfuscation is widely used to protect commercial software against reverse-engineering. However, an adversary can still download, disassemble and analyze binaries of the obfuscated code executed on an embedded System-on-Chip (SoC), and by correlating execution times to input values, extract secret information from the program. In this paper, we show (1) the impact of widely-used obfuscation methods on timing leakage, and (2) that well-known software countermeasures to reduce timing leakage of programs, are not always effective for low-noise environments found in embedded systems. We propose two methods for mitigating timing leakage in obfuscated codes. The first is a compiler driven method, called TAD, which removes conditional branches with distinguishable execution times for an input program. In the second method (TADCI), TAD is combined with dynamic hardware diversity by replacing primitive instructions with Custom Instructions (CIs) that exhibit non-deterministic execution times at runtime. Experimental results on the RISC-V platform show that the information leakage is reduced by 92% and 82% when TADCI is applied to the original and obfuscated source code, respectively.

Timing side-channel attacks pose a major threat to embedded systems due to their ease of accessibility. We propose CIDPro, a framework that relies on dynamic program diversification to mitigate timing side-channel leakage. The proposed framework integrates the widely used LLVM compiler infrastructure and the increasingly popular RISC-V FPGA soft-processor. The compiler automatically generates custom instructions in the security critical segments of the program, and the instructions execute on the RISC-V custom co-processor to produce diversified timing characteristics on each execution instance. CIDPro has been implemented on the Zynq7000 XC7Z020 FPGA device to study the performance overhead and security tradeoffs. Experimental results show that our solution can achieve 80% and 86% timing side-channel capacity reduction for two benchmarks with an acceptable performance overhead compared to existing solutions. In addition, the proposed method incurs only a negligible hardware area overhead of 1% slices of the entire RISC-V system.

In this paper we explore an implementation of a high-throughput, streaming application on REDEFINE-v2, which is an enhancement of REDEFINE. REDEFINE is a polymorphic ASIC combining the flexibility of a programmable solution with the execution speed of an ASIC. In REDEFINE Compute Elements are arranged in an 8x8 grid connected via a Network on Chip (NoC) called RECONNECT, to realize the various macrofunctional blocks of an equivalent ASIC.

Emerging embedded applications are based on evolving standards (e.g., MPEG2/4, H.264/265, IEEE802.11a/b/g/n). Since most of these applications run on handheld devices, there is an increasing need for a single chip solution that can dynamically interoperate between different standards and their derivatives. In order to achieve high resource utilization and low power dissipation, we propose REDEFINE, a polymorphic ASIC in which specialized hardware units are replaced with basic hardware units that can create the same functionality by runtime re -composition. It is a “future-proof” custom hardware solution for multiple applications and their derivatives in a domain. In this article, we describe a compiler framework and supporting hardware comprising compute, storage, and communication resources. Applications described in high-level language (e.g., C) are compiled into application substructures. For each application substructure, a set of compute elements on the hardware are interconnected during runtime to form a pattern that closely matches the communication pattern of that particular application. The advantage is that the bounded CEs are neither processor cores nor logic elements as in FPGAs. Hence, REDEFINE offers the power and performance advantage of an ASIC and the hardware reconfigurability and programmability of that of an FPGA/instruction set processor. In addition, the hardware supports custom instruction pipelining. Existing instruction-set extensible processors determine a sequence of instructions that repeatedly occur within the application to create custom instructions at design time to speed up the execution of this sequence. We extend this scheme further, where a kernel is compiled into custom instructions that bear strong producer-consumer relationship (and not limited to frequently occurring sequences of instructions). Custom instructions, realized as hardware compositions effected at runtime, allow several instances of the same to be active in parallel. A key distinguishing factor in majority of the emerging embedded applications is stream processing. To reduce the overheads of data transfer between custom instructions, direct communication paths are employed among custom instructions. In this article, we present the overview of the hardware-aware compiler framework, which determines the NoC-aware schedule of transports of the data exchanged between the custom instructions on the interconnect. The results for the FFT kernel indicate a 25% reduction in the number of loads/stores, and throughput improves by log(n) for n-point FFT when compared to sequential implementation. Overall, REDEFINE offers flexibility and a runtime reconfigurability at the expense of 1.16× in power and 8× in area when compared to an ASIC. REDEFINE implementation consumes 0.1× the power of an FPGA implementation. In addition, the configuration overhead of the FPGA implementation is 1,000× more than that of REDEFINE.

Application accelerators are predominantly ASICs. The cost of ASIC solutions are order of magnitudes higher than programmable processing cores. Despite this, ASIC solutions are preferred when both high performance and low power is the target. ASICs offer no flexibility in terms of it being able to cater to application derivatives, unless this has been provisioned for at the time of design. In this paper we define the architecture of Runtime Reconfigurable Hardware (RRH) as the platform for application acceleration. The proposed RRH is a homogeneous fabric comprising computing, storage and communicating resources. We also propose a synthesis methodology to realize application written a high level language (HLL) on the RRH. Applications described in HLL is compiled into application substructures. For each application substructure a set of Compute Elements interconnected in a manner that closely matches the communication pattern within it, is allocated. CEs in such a configuration is called a hardware affine. Hardware Affines are carved out on the RRH at runtime. These hardware affines are defined at compile time, and are provisioned at runtime on the fabric. By virtue of the fact that these hardware affines are NOT instruction set processor cores or Logic Elements as in FPGAs, we bear the performance and power advantage of an ASIC, and the hardware reconfigurability/programmability of that of an FPGA/Instruction Set Processor.

A polymorphic ASIC is a runtime reconfigurable hardware substrate comprising compute and communication elements. It is a “future proof” custom hardware solution for multiple applications and their derivatives in a domain. Interoperability between application derivatives at runtime is achieved through hardware reconfiguration. In this paper we present the design of a single cycle Network on Chip (NoC) router that is responsible for effecting runtime reconfiguration of the hardware substrate. The router design is optimized to avoid FIFO buffers at the input port and loop back at output crossbar. It provides virtual channels to emulate a non-blocking network and supports a simple X-Y relative addressing scheme to limit the control overhead to 9 bits per packet. The 8×8 honeycomb NoC (RECONNECT) implemented in 130nm UMC CMOS standard cell library operates at 500MHz and has a bisection bandwidth of 28.5GBps. The network is characterized for random, self-similar and application specific traffic patterns that model the execution of multimedia and DSP kernels with varying network loads and virtual channels. Our implementation with 4 virtual channels has an average network latency of 24 clock cycles and throughput of 62.5% of the network capacity for random traffic. For application specific traffic the latency is 6 clock cycles and throughput is 87% of the network capacity.