MOTIVATION: Confident deconvolution of proteomic spectra is critical for several applications such as de novo sequencing, cross-linking mass spectrometry and handling chimeric mass spectra. RESULTS: In general, all deconvolution algorithms may eventually report mass peaks that are not compatible with the chemical formula of any peptide. We show how to remove these artifacts by considering their mass defects. We introduce Y.A.D.A. 3.0, a fast deconvolution algorithm that can remove peaks with unacceptable mass defects. Our approach is effective for polypeptides with less than 10 kDa, and its essence can be easily incorporated into any deconvolution algorithm. AVAILABILITY AND IMPLEMENTATION: Y.A.D.A. 3.0 is freely available for academic use at http://patternlabforproteomics.org/yada3. SUPPLEMENTARY INFORMATION: Supplementary information is available at Bioinformatics online.

MOTIVATION: Chemical cross-linking coupled to mass spectrometry (XLMS) emerged as a powerful technique for studying protein structures and large-scale protein-protein interactions. Nonetheless, XLMS lacks software tailored toward dealing with multiple conformers; this scenario can lead to high-quality identifications that are mutually exclusive. This limitation hampers the applicability of XLMS in structural experiments of dynamic protein systems, where less abundant conformers of the target protein are expected in the sample. RESULTS: We present QUIN-XL, a software that uses unsupervised clustering to group cross-link identifications by their quantitative profile across multiple samples. QUIN-XL highlights regions of the protein or system presenting changes in its conformation when comparing different biological conditions. We demonstrate our software's usefulness by revisiting the HSP90 protein, comparing three of its different conformers. QUIN-XL's clusters correlate directly to known protein 3D structures of the conformers and therefore validates our software. AVAILABILITYAND IMPLEMENTATION: QUIN-XL and a user tutorial are freely available at http://patternlabforproteomics.org/quinxl for academic users. SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

SUMMARY: A software was developed to evaluate structural models using chemical crosslinking experiments. The user provides the types of linkers used and their reactivity, and the observed crosslinks and dead-ends. The software computes the minimum length of a physically inspired linker that connects the reactive atoms of interest, and reports the consistency of each distance with the experimental observation. Statistics on model consistency with the links are provided. Tools to evaluate the correlation of crosslinks in ensembles of models were developed. TopoLink was used to evaluate the potential crosslinks of all structures of the CATH database. The number of crosslinks expected as a function of protein size and linker length can be used as guide for experimental design. AVAILABILITY AND IMPLEMENTATION: TopoLink is available as free software at http://m3g.iqm.unicamp.br/topolink, and distributed as source code with a user-friendly graphical interface for Windows. A web server is also provided. SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

MOTIVATION: We present the first tool for unbiased quality control of top-down proteomics datasets. Our tool can select high-quality top-down proteomics spectra, serve as a gateway for building top-down spectral libraries and, ultimately, improve identification rates. RESULTS: We demonstrate that a twofold rate increase for two E. coli top-down proteomics datasets may be achievable. AVAILABILITY AND IMPLEMENTATION: http://patternlabforproteomics.org/tdgc, freely available for academic use. SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

MOTIVATION: Around 75% of all mass spectra remain unidentified by widely adopted proteomic strategies. We present DiagnoProt, an integrated computational environment that can efficiently cluster millions of spectra and use machine learning to shortlist high-quality unidentified mass spectra that are discriminative of different biological conditions. RESULTS: We exemplify the use of DiagnoProt by shortlisting 4366 high-quality unidentified tandem mass spectra that are discriminative of different types of the Aspergillus fungus. AVAILABILITY AND IMPLEMENTATION: DiagnoProt, a demonstration video and a user tutorial are available at http://patternlabforproteomics.org/diagnoprot . CONTACT: [email protected] or [email protected]. SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

SUMMARY: Protein identification by mass spectrometry is commonly accomplished using a peptide sequence matching search algorithm, whose sensitivity varies inversely with the size of the sequence database and the number of post-translational modifications considered. We present the Spectrum Identification Machine, a peptide sequence matching tool that capitalizes on the high-intensity b1-fragment ion of tandem mass spectra of peptides coupled in solution with phenylisotiocyanate to confidently sequence the first amino acid and ultimately reduce the search space. We demonstrate that in complex search spaces, a gain of some 120% in sensitivity can be achieved. AVAILABILITY: All data generated and the software are freely available for academic use at http://proteomics.fiocruz.br/software/sim. CONTACT: [email protected] SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

UNLABELLED: We present an updated version of the TFold software for pinpointing differentially expressed proteins in shotgun proteomics experiments. Given an FDR bound, the updated approach uses a theoretical FDR estimator to maximize the number of identifications that satisfy both a fold-change cutoff that varies with the t-test P-value as a power law and a stringency criterion that aims to detect lowly abundant proteins. The new version has yielded significant improvements in sensitivity over the previous one. AVAILABILITY: Freely available for academic use at http://pcarvalho.com/patternlab.

Abstract Summary: We present an approach to statistically pinpoint differentially expressed proteins that have quantitation values near the quantitation threshold and are not identified in all replicates (marginal cases). Our method uses a Bayesian strategy to combine parametric statistics with an empirical distribution built from the reproducibility quality of the technical replicates. Availability:The software is freely available for academic use at http://pcarvalho.com/patternlab. Contact: [email protected] Supplementary information: Supplementary data are available at Bioinformatics online.

SUMMARY: XDIA is a computational strategy for analyzing multiplexed spectra acquired using electron transfer dissociation and collision-activated dissociation; it significantly increases identified spectra (approximately 250%) and unique peptides (approximately 30%) when compared with the data-dependent ETCaD analysis on middle-down, single-phase shotgun proteomic analysis. Increasing identified spectra and peptides improves quantitation statistics confidence and protein coverage, respectively. AVAILABILITY: The software and data produced in this work are freely available for academic use at http://fields.scripps.edu/XDIA CONTACT: [email protected] SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

Abstract Summary: YADA can deisotope and decharge high-resolution mass spectra from large peptide molecules, link the precursor monoisotopic peak information to the corresponding tandem mass spectrum, and account for different co-fragmenting ion species (multiplexed spectra). We describe how YADA enables a pipeline consisting of ProLuCID and DTASelect for analyzing large-scale middle-down proteomics data. Availability: http://fields.scripps.edu/yada Contact: [email protected] Supplementary information: Supplementary data are available at Bioinformatics online.

BACKGROUND: A goal of proteomics is to distinguish between states of a biological system by identifying protein expression differences. Liu et al. demonstrated a method to perform semi-relative protein quantitation in shotgun proteomics data by correlating the number of tandem mass spectra obtained for each protein, or "spectral count", with its abundance in a mixture; however, two issues have remained open: how to normalize spectral counting data and how to efficiently pinpoint differences between profiles. Moreover, Chen et al. recently showed how to increase the number of identified proteins in shotgun proteomics by analyzing samples with different MS-compatible detergents while performing proteolytic digestion. The latter introduced new challenges as seen from the data analysis perspective, since replicate readings are not acquired. RESULTS: To address the open issues above, we present a program termed PatternLab for proteomics. This program implements existing strategies and adds two new methods to pinpoint differences in protein profiles. The first method, ACFold, addresses experiments with less than three replicates from each state or having assays acquired by different protocols as described by Chen et al. ACFold uses a combined criterion based on expression fold changes, the AC test, and the false-discovery rate, and can supply a "bird's-eye view" of differentially expressed proteins. The other method addresses experimental designs having multiple readings from each state and is referred to as nSVM (natural support vector machine) because of its roots in evolutionary computing and in statistical learning theory. Our observations suggest that nSVM's niche comprises projects that select a minimum set of proteins for classification purposes; for example, the development of an early detection kit for a given pathology. We demonstrate the effectiveness of each method on experimental data and confront them with existing strategies. CONCLUSION: PatternLab offers an easy and unified access to a variety of feature selection and normalization strategies, each having its own niche. Additionally, graphing tools are available to aid in the analysis of high throughput experimental data. PatternLab is available at http://pcarvalho.com/patternlab.

BACKGROUND: BLAST is a widely used genetic research tool for analysis of similarity between nucleotide and protein sequences. This paper presents a software application entitled "Squid" that makes use of grid technology. The current version, as an example, is configured for BLAST applications, but adaptation for other computing intensive repetitive tasks can be easily accomplished in the open source version. This enables the allocation of remote resources to perform distributed computing, making large BLAST queries viable without the need of high-end computers. RESULTS: Most distributed computing / grid solutions have complex installation procedures requiring a computer specialist, or have limitations regarding operating systems. Squid is a multi-platform, open-source program designed to "keep things simple" while offering high-end computing power for large scale applications. Squid also has an efficient fault tolerance and crash recovery system against data loss, being able to re-route jobs upon node failure and recover even if the master machine fails. Our results show that a Squid application, working with N nodes and proper network resources, can process BLAST queries almost N times faster than if working with only one computer. CONCLUSION: Squid offers high-end computing, even for the non-specialist, and is freely available at the project web site. Its open-source and binary Windows distributions contain detailed instructions and a "plug-n-play" instalation containing a pre-configured example.