Computed tomography (CT) is the most sensitive imaging technique for detecting lung nodules, and is now being evaluated as a screening tool for lung cancer in several large samples studies all over the world. In this report, we describe a semiautomatic method for 3-D segmentation of lung nodules in CT images for subsequent volume assessment. The distinguishing features of our algorithm are the following. 1) The user interaction process. It allows the introduction of the knowledge of the expert in a simple and reproducible manner. 2) The adoption of the geodesic distance in a multithreshold image representation. It allows the definition of a fusion--segregation process based on both gray-level similarity and objects shape. The algorithm was validated on low-dose CT scans of small nodule phantoms (mean diameter 5.3--11 mm) and in vivo lung nodules (mean diameter 5--9.8 mm) detected in the Italung-CT screening program for lung cancer. A further test on small lung nodules of Lung Image Database Consortium (LIDC) first data set was also performed. We observed a RMS error less than 6.6% in phantoms, and the correct outlining of the nodule contour was obtained in 82/95 lung nodules of Italung-CT and in 10/12 lung nodules of LIDC first data set. The achieved results support the use of the proposed algorithm for volume measurements of lung nodules examined with low-dose CT scanning technique.

Skeletal age assessment is a common and time-consuming task in pediatric radiology. In this work we describe a system which implements the TW2 method, using a neural network architecture. Each bone complex is localized on the image, and preprocessed using either a Gabor transform or a multiscale difference of Gaussian filtering. The output of the preprocessing stage is fed to a set of neural networks trained to classify each bone accordingly to the TW2 method. Afterward, the skeletal age is estimated and compared with the classification of an expert radiologist.

The paper describes a neural-network-based system for the computer aided detection of lung nodules in chest radiograms. Our approach is based on multiscale processing and artificial neural networks (ANNs). The problem of nodule detection is faced by using a two-stage architecture including: 1) an attention focusing subsystem that processes whole radiographs to locate possible nodular regions ensuring high sensitivity; 2) a validation subsystem that processes regions of interest to evaluate the likelihood of the presence of a nodule, so as to reduce false alarms and increase detection specificity. Biologically inspired filters (both LoG and Gabor kernels) are used to enhance salient image features. ANNs of the feedforward type are employed, which allow an efficient use of a priori knowledge about the shape of nodules, and the background structure. The images from the public JSRT database, including 247 radiograms, were used to build and test the system. We performed a further test by using a second private database with 65 radiograms collected and annotated at the Radiology Department of the University of Florence. Both data sets include nodule and nonnodule radiographs. The use of a public data set along with independent testing with a different image set makes the comparison with other systems easier and allows a deeper understanding of system behavior. Experimental results are described by ROC/FROC analysis. For the JSRT database, we observed that by varying sensitivity from 60 to 75% the number of false alarms per image lies in the range 4-10, while accuracy is in the range 95.7-98.0%. When the second data set was used comparable results were obtained. The observed system performances support the undertaking of system validation in clinical settings.

A computational method is reported which allows the fully automated recovery of the three-dimensional shape of the cardiac left ventricle from a reduced set of apical echo views. Two typically ill-posed problems have been faced: 1) the detection of the left ventricle contours in each view, and 2) the integration of the detected contour points (which form a sparse and partially inconsistent data set) into a single surface representation. The authors' solution to these problems is based on a careful integration of standard computer vision algorithms with neural networks. Boundary detection comprises three steps: edge detection, edge grouping, and edge classification. The first and second steps (which are typical early-vision tasks not involving specific domain-knowledge) have been performed through fast, well-established algorithms of computer vision. The higher level task of left ventricle-edge discrimination, which involves the exploitation of specific knowledge about the left ventricle silhouette, has been performed by feedforward neural networks. Following the most recent results in the field of computer vision, the first step in solving the problem of recovering the ventricle surface has been the adoption of a physically inspired model of it. Basically, the authors have modeled the left ventricle surface as a closed, thin, elastic surface and the data as a set of radial springs acting on it. The recovery process is equivalent to the settling of the surface-plus-springs system into a stable configuration of minimum potential energy. The finite element discretization of this model leads directly to an analog neural-network implementation. The efficiency of such an implementation has been remarkably enhanced through a learning algorithm which embeds specific knowledge about the shape of the left ventricle in the network. Experiments using clinical echographic sequences are described. Four apical views (each with a different rotation of the probe) have been acquired during a heartbeat from a set of seven normal subjects. These images have been utilized to set the various processing modules and test their capabilities.

The coronary tree expert (CORTEX) analyzer, which is a vision system for the description of the bidimensional shape and position of coronary vessels using standard nonsubtracted radiographic images, is described. A bottom-up approach was used to deal with the typical characteristics of medical images, such as structural and nonstructural noise and complexity and variability of biological shapes. On these grounds, grouping criteria were utilized to produce intermediate image representations with an increasing complexity in a hierarchical manner (from edge points to curves, segments, bars, and finally to vessels and their mutual relations). In this way, uncertain, inconsistent, and deficient information was efficiently processed. The evaluation of CORTEX segmentation is also performed according to a signal-detection-theory-like approach.>