Wireless IEEE 802.11 networks in residences, small businesses, and public "hot spots" typically encounter the wireline access link (DSL, cable modem, T1, etc.) as the slowest and most expensive part of the end-to-end path. Consequently, network architectures have been proposed that employ multiple wireless hops in route to and from the wired Internet. Unfortunately, use of current media access and transport protocols for such systems can result in severe unfairness and even starvation for flows that are an increasing number of hops away from a wired Internet entry point. Our objective is to study fairness and end-to-end performance in multihop wireless backhaul networks via the following methodology. First, we develop a formal reference model that characterizes objectives such as removing spatial bias (i.e., providing performance that is independent of the number of wireless hops to a wire) and maximizing spatial reuse. Second, we perform an extensive set of simulation experiments to quantify the impact of the key performance factors towards achieving these goals. For example, we study the roles of the MAC protocol, end-to-end congestion control, antenna technology, and traffic types. Next, we develop and study a distributed layer 2 fairness algorithm which targets to achieve the fairness of the reference model without modification to TCP. Finally, we study the critical relationship between fairness and aggregate throughput and in particular study the fairness-constrained system capacity of multihop wireless backhaul networks.

The Resilient Packet Ring (RPR) IEEE 802.17 standard is a new technology for high-speed backbone metropolitan area networks. A key performance objective of RPR is to simultaneously achieve high utilization, spatial reuse, and fairness, an objective not achieved by current technologies such as SONET and Gigabit Ethernet nor by legacy ring technologies such as FDDI. The core technical challenge for RPR is the design of a bandwidth allocation algorithm that dynamically achieves these three properties. The difficulty is in the distributed nature of the problem, that upstream ring nodes must inject traffic at a rate according to congestion and fairness criteria downstream. Unfortunately, we show that under unbalanced and constant-rate traffic inputs, the RPR fairness algorithm suffers from severe and permanent oscillations spanning nearly the entire range of the link capacity. Such oscillations hinder spatial reuse, decrease throughput, and increase delay jitter. In this paper, we introduce a new dynamic bandwidth allocation algorithm called Distributed Virtual-time Scheduling in Rings (DVSR). The key idea is for nodes to compute a simple lower bound of temporally and spatially aggregated virtual time using per-ingress counters of packet (byte) arrivals. We show that with this information propagated along the ring, each node can remotely approximate the ideal fair rate for its own traffic at each downstream link. Hence, DVSR flows rapidly converge to their ring-wide fair rates while maximizing spatial reuse. To evaluate DVSR, we develop an idealized fairness reference model and bound the deviation in service between DVSR and the reference model, thereby bounding the unfairness. With simulations, we find that compared to current techniques, DVSR's convergence times are an order of magnitude faster (e.g., 2 versus 50 ms), oscillations are mitigated (e.g., ranges of 0.1% versus up to 100%), and nearly complete spatial reuse is achieved (e.g., 0.1% throughput loss versus 33%). Finally, we provide a proof-of-concept implementation of DVSR on a 1 Gb/s network processor testbed and report the results of testbed measurements.