Micro well-plates are an apparatus commonly used in chemical and biological experiments that are a few centimeters thick and contain wells or divets. In this paper, we aim to solve the task of placing the well-plate onto a well-plate holder (referred to as holder). This task is challenging due to the holder’s raised grooves being a few millimeters in height, with a clearance of less than 1 mm between the well-plate and holder, thus requiring precise control during placing. Our placing task has the following challenges: 1) The holder’s detected pose is uncertain; 2) the required accuracy is at the millimeter to sub-millimeter level due to the raised groove’s shallow height and small clearance; 3) the holder is not fixed to a desk and is susceptible to movement from external forces. To address these challenges, we developed methods including a) using tactile sensors for accurate pose estimation of the grasped well-plate to handle issue (1); b) sliding the well-plate onto the target holder while maintaining contact with the holder’s groove and estimating its orientation for accurate alignment. This allows for high precision control (addressing issue (2)) and prevents displacement of the holder during placement (addressing issue (3)). We demonstrate a high success rate for the well-plate placing task, even under noisy observation of the holder’s pose.4

We study the problem of object retrieval in scenarios where visual sensing is absent, object shapes are unknown beforehand and objects can move freely, like grabbing objects out of a drawer. Successful solutions require localizing free objects, identifying specific object instances, and then grasping the identified objects, only using touch feedback. Unlike vision, where cameras can observe the entire scene, touch sensors are local and only observe parts of the scene that are in contact with the manipulator. Moreover, information gathering via touch sensors necessitates applying forces on the touched surface which may disturb the scene itself. Reasoning with touch, therefore, requires careful exploration and integration of information over time - a challenge we tackle. We present a system capable of using sparse tactile feedback from fingertip touch sensors on a dexterous hand to localize, identify and grasp novel objects without any visual feedback. Videos are available at https://sites.google.com/view/tactofind.

Many of the routing protocols that have been designed for wireless ad-hoc networks focus on energy-efficiency and guaranteeing high throughput in a non-adversarial setting. However, given that ad-hoc and sensor networks are deployed and left unattended for long periods of time, it is crucial to design secure routing protocols for these networks. Over the past few years, attacks on the routing protocols have been studied and a number of secure routing protocols have been designed for wireless sensor networks. However, there has not been a comprehensive study of how these protocols compare in terms of achieving security goals and maintaining high throughput. In this paper, we focus on the problem of analyzing the inherent security of routing protocols with respect to two categories: multi-path and single-path routing. Within each category, we focus on deterministic vs. probabilistic mechanisms for setting up the routes. We consider the scenario in which an adversary has subverted a subset of the nodes, and as a result, the paths going through these nodes are compromised. We present our findings through simulation results.