In this paper, we conduct a measurement study on operational 5G networks deployed across different frequency bands (mmWave and sub-6GHz) and server locations (mobile edge and Internet cloud). Specifically, we assess 5G performance in both uplink and downlink across multiple operators’ networks. We then carry out extensive comparisons of transport-layer protocols using ten different algorithms in full-fledged 5G networks, including an edge computing environment. Finally, we evaluate representative mobile applications over the 5G network with and without edge servers. Our comprehensive measurements provide several insights that affect the experience of 5G users: (i) With a 5G edge server, existing TCP congestion control algorithms can achieve throughput up to 1.8Gbps with only a single flow. (ii) The maximum TCP receive buffer size, which is set by off-the-shelf 5G phones, can limit the throughput performance of 5G networks, which is not observed in 4G LTE-A networks. (iii) Despite significant latency gains in download-centric applications, the 5G edge service provides limited benefits to CPU-intensive tasks or those that use significant uplink bandwidth. To our knowledge, this is the first measurement-driven understanding of 5G edge computing “in the wild,” which can provide an answer to how edge computing would perform in real 5G networks.

Unexpected large packet delays are often observed in cellular networks due to huge network queuing caused by excessive traffic coming into the network. To deal with the large queue problem, many congestion control algorithms try to find out how much traffic the network can accommodate, either by measuring network performance or by directly providing explicit information. However, due to the nature of the control in which queue growth should be observed or the necessity to modify the overall network architecture, existing algorithms are experiencing difficulties in keeping queues within a strict bound. In this paper, we propose a novel congestion control algorithm based on simple feedback, ECLAT which can provide bounded queuing delay using only one-bit signaling already available in traditional network architecture. To do so, a base station or a router running ECLAT 1) calculates how many packets each flow should transmit and 2) analyzes when congestion feedback needs to be forwarded to adjust the flow’s packet transmission to the desired rate. Our extensive experiments in our testbed demonstrate that ECLAT achieves strict queuing delay bounds, even in the dynamic cellular network environment.

Edge computing capabilities in 5G wireless networks promise to benefit mobile users: computing tasks can be offloaded from user devices to nearby edge servers, reducing users’ experienced latencies. Few works have addressed how this offloading should handle long-term user mobility: as devices move, they will need to offload to different edge servers, which may require migrating data or state information from one edge server to another. In this paper, we introduce MoDEMS, a system model and architecture that provides a rigorous theoretical framework and studies the challenges of such migrations to minimize the service provider cost and user latency. We show that this cost minimization problem can be expressed as an integer linear programming problem, which is hard to solve due to resource constraints at the servers and unknown user mobility patterns. We show that finding the optimal migration plan is in general NP-hard, and we propose alternative heuristic solution algorithms that perform well in both theory and practice. We finally validate our results with real user mobility traces, ns-3 simulations, and an LTE testbed experiment. Migrations reduce the latency experienced by users of edge applications by 33% compared to previously proposed migration approaches.

Today’s Internet must support applications with increasingly dynamic and heterogeneous connectivity requirements, such as video streaming and the Internet of Things. Yet current network management practices generally rely on pre-specified network configurations, which may not be able to cope with dynamic application needs. Moreover, even the best-specified policies will find it difficult to cover all possible scenarios, given applications’ increasing heterogeneity and dynamic network conditions, e.g., on volatile wireless links. In this work, we instead propose a model-free learning approach to find the optimal network policies for current network flow requirements. This approach is attractive as comprehensive models do not exist for how different policy choices affect flow performance under changing network conditions. However, it can raise new challenges for online learning algorithms: policy configurations can affect the performance of multiple flows sharing the same network resources, and this performance coupling limits the scalability and optimality of existing online learning algorithms. In this work, we extend multi-armed bandit frameworks to propose new online learning algorithms for protocol selection with provably sublinear regret under certain conditions. We validate the optimality and scalability of our algorithms through data-driven simulations and testbed experiments. (An extended abstract of this work was accepted by IEEE ICNP as a short paper Zhanget al. (2019)).

Edge computing capabilities in 5G wireless networks promise to benefit mobile users: computing tasks can be offloaded from user devices to nearby edge servers, reducing users’ experienced latencies. Few works have addressed how this offloading should handle long-term user mobility: as devices move, they will need to offload to different edge servers, which may require migrating data or state information from one edge server to another. In this paper, we introduce MoDEMS, a system model and architecture that provides a rigorous theoretical framework and studies the challenges of such migrations to minimize the service provider cost and user latency. We show that this cost minimization problem can be expressed as an integer linear programming problem, which is hard to solve due to resource constraints at the servers and unknown user mobility patterns. We show that finding the optimal migration plan is in general NP-hard, and we propose alternative heuristic solution algorithms that perform well in both theory and practice. We finally validate our results with real user mobility traces, ns-3 simulations, and an LTE testbed experiment. Migrations reduce the latency experienced by users of edge applications by 33% compared to previously proposed migration approaches.

As the importance of latency performance increases, a number of multi-bit feedback-based congestion control mechanisms have been proposed for explicit latency control in cellular networks. However, due to their reactive nature and limited access to the network queue, while latency reduction was possible, latency guarantee has not been achieved. Also, due to the need for end-host modifications, it was hard to commonly provide latency benefit to all connected devices. To this end, we propose a novel network-assisted congestion control, ECLAT, which can always bound the queuing delay within a delay-budget through ECN-based single-bit feedback while maintaining high link utilization for any device. To do so, ECLAT 1) calculates its target operating point for each flow, which is related to the maximum allowable cwnd to meet the delay-budget under time-varying cellular networks, and 2) determines its single-bit feedback policy to limit cwnd within the target operating point. Our extensive experiments in our testbed demonstrate that ECLAT is able to bound the queuing delays of multiple flows within their delay-budget and achieve high utilization even in the dynamic cellular network environment.

Edge computing systems benefit from knowledge of short-term mobility from 5G technologies, as tasks offloaded from user devices can be placed at the edge to reduce their latencies. However, as devices move, they will need to offload their tasks to different edge servers, which may require migrating data from one edge server to another. In this paper, we introduce MoDEMS, a system architecture through which we provide a rigorous theoretical framework to study the challenges of such migrations to minimize the service provider cost and user latency. We show that this cost minimization problem can be expressed as an integer linear programming problem, which is challenging to solve due to resource constraints at the servers and unknown user mobility patterns. We show that finding the optimal migration plan is in general NP-hard, and we propose alternative heuristic solution algorithms. We finally validate our results with realistic user mobility traces.

This paper presents a new approach to memory disaggregation called FluidMem that leverages the userfault mechanism in Linux to achieve full memory disaggregation in software. FluidMem enables dynamic and transparent resizing of an unmodified Virtual Machine’s (VM’s) memory footprint in the cloud. As a result, a VM’s memory footprint can seamlessly scale over multiple machines or even be downsized to a near-zero footprint on a given server. FluidMem’s architecture provides flexibility to cloud operators to manage remote memory without requiring guest intervention, while also supporting paging out the entirety of a VM’s pages within its address space. FluidMem integrates with a remote memory backend in a modular way, easily supporting systems such as RAMCloud to harness remote memory. We demonstrate FluidMem outperforms an existing memory disaggregation approach based on network swap. Microbenchmarks are evaluated to characterize the latency of different components of the FluidMem architecture, and two memory-intensive applications are demonstrated using FluidMem, the Graph500 benchmark, and MongoDB. Additionally, we show FluidMem can flexibly and efficiently grow and shrink the memory footprint of a VM as defined by a cloud provider.

In this paper, we propose SPARCLE, a novel scheduling system offering network-aware polynomial-time task assignment and resource allocation algorithms for stream processing applications in dispersed computing networks. In particular, we address two major challenges. The first one concerns the assignment of both computation and transport tasks comprising a stream processing application to computing nodes and communication links of the network, respectively, to maximize the application's processing rate. The second one concerns the resource allocation of multiple stream processing applications to satisfy their requested QoS. Our experimental results on a real image stream processing application and extensive simulations show that SPARCLE can increase the application's processing rate by 9 times and 3 times, compared to the cloud computing case and state-of-the-art algorithms, respectively.

Emerging applications like virtual reality (VR), augmented reality (AR), and 360-degree video aim to exploit the unprecedentedly low latencies promised by technologies like the tactile Internet and mobile 5G networks. Yet these promises are still unrealized. In order to fulfill them, it is crucial to understand where packet delays happen, which impacts protocol performance such as throughput and latency. In this work, we empirically find that sender-side protocol stack delays can cause high end-to-end latencies, though existing solutions primarily address network delays. Unfortunately, however, current latency diagnosis tools cannot even distinguish between delays on network links and delays in the end hosts. To close this gap, we present ELEMENT, a latency diagnosis framework that decomposes end-to-end TCP latency into endhost and network delays, without requiring admin privileges at the sender or receiver.

Ensuring high availability for applications despite unpredictable cloud component failure events is a well-known problem in managing cloud infrastructure. One proposed solution uses a VM redundancy approach, reserving cloud resources for backup VMs that can substitute for primary ones in case of a failure event. However, this solution decreases the cloud resource utilization, since the backup resources usually remain idle. In this paper, we propose ECHO, a cloud resource management system that overbooks these backup VMs by optimizing the overbooking rate tradeoff between maximizing the cloud resource utilization, and thus maximizing the cloud provider's revenue; and improving application availability, thus satisfying users. Specifically, ECHO first obtains the optimal overbooking rate required to achieve a cloud provider's desired resource utilization level. It then computes the optimal (required) number of backup VMs that are required to maintain a given application availability level. Our extensive experimental and simulation results show that using ECHO can increase the number of accepted applications with satisfied availability by about 30%, while increasing the defined resource utilization at the same time.

Today’s Internet must support applications with increasingly dynamic and heterogeneous connectivity requirements, such as video streaming and the Internet of Things. Yet current network management practices generally rely on pre-specified flow configurations, which cannot cover all possible scenarios. In this work, we instead propose a model-free learning approach to automatically optimize the policies for heterogeneous network flows. This approach is attractive as no existing comprehensive models quantify how different policy choices affect flow performance under dynamically changing network conditions. We extend multi-armed bandit frameworks to propose new online learning algorithms for protocol selection, addressing the challenge of policy configurations affecting the performance of multiple flows sharing the same network resources. This performance coupling limits the scalability and optimality of existing online learning algorithms. We theoretically prove that our algorithm achieves a sublinear regret and demonstrate its optimality and scalability through data-driven simulations.

4G LTE networks across the world (e.g., United States, Europe, and South Korea) use the same mechanism to broadcast emergency alerts. These alerts include AMBER, severe weather alerts, and the (unblockable) Presidential Alert in the US. We demonstrate the ability to spoof these alerts by forcing any 4G phone in the area of our malicious cell tower to receive and display a fabricated message. This demonstration uses a commercially-available software-defined radio, an LTE base station, and our modifications to the open-source NextEPC and srsLTE libraries to send the Presidential Alert to phones volunteered from the audience.

This paper presents a fully distributed scheduling framework called CASTLE (Client-side Adaptive Scheduler That minimizes Load and Energy), which jointly optimizes the spectral efficiency of cellular networks and battery consumption of smart devices. To do so, we focus on scenarios when many smart devices compete for cellular resources in the same base station: spreading out transmissions over time so that only a few devices transmit at once improves both spectral efficiency and battery consumption. To this end, we devise two novel features in CASTLE. First, we explicitly consider inter-cell interference for accurate cellular load estimation. Based on our observations, we exploit the RSRQ (Reference Signal Received Quality) and SINR as features in a machine learning algorithm to accurately estimate the cellular load. Second, we propose a fully distributed scheduling algorithm that coordinates transmissions between clients based on the locally estimated load level at each client. Our formulation for minimizing battery consumption at each device leads to an optimized backoff-based algorithm that fits practical environments. To evaluate these features, we prototype a complete LTE system testbed consisting of mobile devices, eNodeBs, EPC (Evolved Packet Core) and application servers. Our comprehensive experimental results show that CASTLE's load estimation is up to 91% accurate, and that CASTLE achieves higher spectral efficiency with less battery consumption, compared to existing centralized scheduling algorithms as well as a distributed CSMA-like protocol. Furthermore, we develop a light-weight SDK that can expedite the deployment of CASTLE into smart devices and evaluate it in a commercial LTE network.

Modern cell phones are required to receive and display alerts via the Wireless Emergency Alert (WEA) program, under the mandate of the Warning, Alert, and Response Act of 2006. These alerts include AMBER alerts, severe weather alerts, and (unblockable) Presidential Alerts, intended to inform the public of imminent threats. Recently, a test Presidential Alert was sent to all capable phones in the United States, prompting concerns about how the underlying WEA protocol could be misused or attacked. In this paper, we investigate the details of this system, and develop and demonstrate the first practical spoofing attack on Presidential Alerts, using both commercially available hardware as well as modified open source software. Our attack can be performed using a commercially-available software defined radio, and our modifications to the open source NextEPC and srsLTE software libraries. We find that with only four malicious portable base stations of a single Watt of transmit power each, almost all of a 50,000-seat stadium can be attacked with a 90% success rate. The true impact of such an attack would of course depend on the density of cell phones in range; fake alerts in crowded cities or stadiums could potentially result in cascades of panic. Fixing this problem will require a large collaborative effort between carriers, government stakeholders, and cell phone manufacturers. To seed this effort, we also discuss several defenses to address this threat in both the short and long term.

We present the demonstration of a fully distributed scheduling framework called CASTLE (Client-side Adaptive Scheduler That minimizes Load and Energy) that jointly optimizes the spectral efficiency of cellular networks and battery consumption of smart devices. To do so, we focus on scenarios when many smart devices compete for cellular resources in the same base station: spreading out transmissions over time so that only a few devices transmit at once and improves both spectral efficiency and battery consumption. To this end, we devise two novel features in CASTLE. First, we explicitly consider inter-cell interference for accurate cellular load estimation in our machine learning algorithm. Second, we propose a fully distributed scheduling algorithm that coordinates transmissions between clients based on the locally estimated load level at each client. Our formulation for minimizing battery consumption at each device leads to an optimized back off-based algorithm that fits practical environments. Our comprehensive experimental results show that CASTLE's load estimation is up to 91 % accurate, and that CASTLE achieves higher spectral efficiency with less battery consumption, compared to existing centralized scheduling algorithms as well as a distributed CSMA-like protocol. Furthermore,we develop a light-weight SDK that can expedite the deployment of CASTLE into smart devices and evaluate it in a commercial LTE network.

Fog computing is an emerging architecture that aims to run applications on multiple devices that lie on a continuum from cloud servers to personal user smartphones. These architectures allow applications to optimize over the information stored at and functionalities run on each device, based on individual device capabilities. We demonstrate the benefits of this approach for mobile video streaming. Existing HAS (HTTP adaptive streaming) techniques often suffer from problems like unstable video quality and suboptimal resource utilization. We find that a lack of coordination prevents both clientand network-side HAS techniques from solving them. However, our fog approach can exploit existing telecommunication APIs, which expose network capabilities to applications, in order to coordinate between clients and the network. Our coordinated HAS solution, FLARE, optimizes the total utility of all clients in a cell while maintaining stable video quality and supporting user- and device-specific needs. We implement FLARE on a commodity LTE femtocell and use the implementation to conduct the first comparison of HAS players on an LTE femtocell. By conducting extensive experiments using the ns-3 simulator, we also demonstrate that FLARE (i) enhances the average video bitrate, (ii) achieves stable video quality, and (iii) balances the throughput of simultaneous video and data flows, compared to other representative HAS solutions.

Video streaming applications based on Peer-to-Peer (P2P) systems are popular for their scalability, which is hard to achieve with traditional client-server approaches. In particular, layered video streaming has been much-studied due to its ability to differentiate users' streaming qualities in heterogeneous user environments. Previous work, however, has shown that user misbehavior (e.g., free-riding and protocol deviation) poses a serious threat to P2P systems that are not equipped with proper incentive mechanisms. We propose a method to disincentivize such misbehavior. Our SVC-TChain is a layered P2P video streaming method based on scalable video coding (SVC), which uses the recently proposed T-Chain incentive mechanism to discourage free-riding. After introducing T-Chain, we present the first analytical framework to study SVC piece selection with multiple video layers, using it to efficiently choose SVC-TChain's optimal piece selection parameters and thus discourage deviations from the piece selection policy. Extensive experimental results show that SVC-TChain outperforms layered extensions of BiTos and Give-to-Get, two popular P2P video streaming approaches, both in the absence of user misbehavior and when some users misbehave.

Current COTS WiFi based work on wireless motion sensing extracts human movements such as keystroking and hand motion mainly from amplitude training to classify different types of motions, as obtaining meaningful phase values is very challenging due to time-varying phase noises occurred with the movement. However, the methods based only on amplitude training are not very practical since their accuracy is not environment and location independent. This paper proposes an effective phase noise calibration technique which can be broadly applicable to COTS WiFi based motion sensing. We leverage the fact that multi-path for indoor environment contains certain static paths, such as reflections from wall or static furniture, as well as dynamic paths due to human hand and arm movements. When a hand moves, the phase value of the signal from the hand rotates as the path length changes and causes the superposition of signals over static and dynamic paths in antenna and frequency domain. To evaluate the effectiveness of the proposed technique, we experiment with a prototype system that can track hand gestures in a non-intrusive manner, i.e. users are not equipped with any device, using COTS WiFi devices. Our evaluation shows that calibrated phase values provide much rich, yet robust information on motion tracking -- 80th percentile angle estimation error up to 14 degrees, 80th percentile tracking error up to 15 cm, and its robustness to the environment and the speed of movement.

As more devices gain Internet connectivity, more information needs to be exchanged between them. For instance, cloud servers might disseminate instructions to clients, or sensors in the Internet of Things might send measurements to each other. In such scenarios, information spreads faster when users have an incentive to contribute data to others. While many works have considered this problem in peer-to-peer scenarios, none have rigorously theorized the performance of different design choices for the incentive mechanisms. In particular, different designs have different ways of "bootstrapping" new users (distributing information to them) and preventing "free-riding" (receiving information without uploading any in return). We classify incentive mechanisms in terms of reciprocity-, altruism-, and reputation-based algorithms, and then analyze the performance of these three basic and three hybrid algorithms. We show that the algorithms lie along a tradeoff between fairness and efficiency, with altruism and reciprocity at the two extremes. The three hybrids all leverage their component algorithms to achieve similar efficiency. The reputation hybrids are the most fair and can nearly match altruism's bootstrapping speed, but only the reciprocity/reputation hybrid can match reciprocity's zero-tolerance for free-riding. It therefore yields better fairness and efficiency when free-riders are present. We validate these comparisons with extensive experimental results.

To cope with recent exponential increases in demand for mobile data, wireless Internet service providers (ISPs) are increasingly changing their pricing plans and deploying Wi-Fi hotspots to offload their mobile traffic. However, these ISP-centric approaches for traffic management do not always match the interests of mobile users. Users face a complex, multi-dimensional tradeoff between cost, throughput, and delay in making their offloading decisions: while they may save money and receive a higher throughput by waiting for Wi-Fi access, they may not wait for Wi-Fi if they are sensitive to delay. To navigate this tradeoff, we develop Adaptive bandwidth Management through USer-Empowerment (AMUSE), a functional prototype of a practical, cost-aware Wi-Fi offloading system that takes into account a user's throughput-delay tradeoffs and cellular budget constraint. Based on predicted future usage and Wi-Fi availability, AMUSE decides which applications to offload to what times of the day. Since nearly all traffic flows from mobile devices are TCP flows, we introduce a new receiver-side bandwidth allocation mechanism to practically enforce the assigned rate of each TCP application. Thus, AMUSE users can optimize their bandwidth rates according to their own cost-throughput-delay tradeoff without relying on support from different apps’ content servers. Through a measurement study of 20 smartphone users’ traffic usage traces, we observe that though users already offload a large amount of some application types, our framework can offload a significant additional portion of users’ cellular traffic. We implement AMUSE on Windows 7 tablets and evaluate its effectiveness with 3G and Wi-Fi usage data obtained from a trial with 37 mobile users. Our results show that AMUSE improves user utility; when compared with AMUSE, other offloading algorithms yield 14 and 27 percent lower user utilities for light and heavy users, respectively. Intelligently managing users’ competing interests for cost, throughput, and delay can therefore improve their offloading decisions.

Mobile users face a tradeoff between cost, throughput, and delay in making their offloading decisions. To navigate this tradeoff, we propose AMUSE (Adaptive bandwidth Management through USer-Empowerment), a practical, costaware WiFi offloading system that takes into account a user's throughput-delay tradeoffs and cellular budget constraint. Based on predicted future usage and WiFi availability, AMUSE decides which applications to offload to what times of the day. To practically enforce the assigned rate of each TCP application, we introduce a receiver-side TCP bandwidth control algorithm that adjusts the rate by controlling the TCP advertisement window from the user side. We implement AMUSE on Windows 7 tablets and evaluate its effectiveness with 3G and WiFi usage data obtained from a trial with 25 mobile users. Our results show that AMUSE improves user utility.

The two largest U.S. wireless ISPs have recently moved towards usage-based pricing to better manage the growing demand on their networks. Yet usage-based pricing still requires ISPs to over-provision capacity for demand at peak times of the day. Time-dependent pricing (TDP) addresses this problem by considering when a user consumes data, in addition to how much is used. We present the architecture, implementation, and a user trial of an end-to-end TDP system called TUBE. TUBE creates a price-based feedback control loop between an ISP and its end users. On the ISP side, it computes TDP prices so as to balance the cost of congestion during peak periods with that of offering lower prices in less congested periods. On mobile devices, it provides a graphical user interface that allows users to respond to the offered prices either by themselves or using an "autopilot" mode. We conducted a pilot TUBE trial with 50 iPhone or iPad 3G data users, who were charged according to our TDP algorithms. Our results show that TDP benefits both operators and customers, flattening the temporal fluctuation of demand while allowing users to save money by choosing the time and volume of their usage.