This paper investigates a low Earth orbit (LEO) satellite communication system enhanced by an active stacked intelligent metasurface (ASIM), mounted on the backplate of the satellite’s solar panels to efficiently utilize limited onboard space and reduce the main satellite power amplifier requirements. The system serves multiple ground users via rate-splitting multiple access (RSMA) and IoT devices through a symbiotic radio network. Multi-layer sequential processing in the ASIM improves effective channel gains and suppresses inter-user interference, outperforming active RIS and beyond-diagonal RIS designs. Three optimization approaches are evaluated: block coordinate descent with successive convex approximation (BCD-SCA), model-assisted multi-agent constraint soft actor-critic (MA-CSAC), and multi-constraint proximal policy optimization (MCPPO). Simulation results show that BCD-SCA converges fast and stably in convex scenarios without learning, MCPPO achieves rapid initial convergence with moderate stability, and MA-CSAC attains the highest long-term spectral and energy efficiency in large-scale networks. Energy–spectral efficiency trade-offs are analyzed for different ASIM elements, satellite antennas, and transmit power. Overall, the study demonstrates that integrating multi-layer ASIM with suitable optimization algorithms offers a scalable, energy-efficient, and high-performance solution for next-generation LEO satellite communications.

Stacked intelligent metasurface (SIM) as an advanced signal processing paradigm enables real-time processing of electromagnetic waves at the speed of light. Benefiting from this technology, the current paper studies the downlink transmission of a wireless network, where a SIM-deployed base station (BS) serves two disjoint sets of energy- and information-oriented terminals via simultaneous wireless information and power transfer (SWIPT). Toward optimizing the performance of this system, a resource allocation problem is formulated for characterizing the fundamental trade-off between the aggregate information rate and the overall harvested energy. By virtue of its tightly-coupled and non-convex nature, we equivalently transform this problem to a Markov decision process (MDP) form. Next, we train an asynchronous advantage actor critic (A3C) agent on the MDP-reformulated problem for optimizing the transmit power of the BS and the electromagnetic response of the SIM, in a joint fashion. Subsequently, by taking into account the mobility of terminals, we further enrich the adaptability of the trained A 3 C agent via meta-learning. It is numerically revealed that incorporating SIM leads to an approximate 30 % enhancement in the energy efficiency of existing SWIPT systems.

This paper centers around a multiple-input-multiple-output (MIMO) visible light communication (VLC) system, where an unmanned aerial vehicle (UAV) benefits from a light emitting diode (LED) array to serve photo-diode (PD)equipped users for illumination and communication simultaneously. Concerning the battery limitation of the UAV and considerable energy consumption of the LED array, a hybrid dimming control scheme is devised at the UAV that effectively controls the number of glared LEDs and thereby mitigates the overall energy consumption. To assess the performance of this system, a radio resource allocation problem is accordingly formulated for jointly optimizing the motion trajectory, transmit beamforming and LED selection at the UAV, assuming that channel state information (CSI) is partially available. By reformulating the optimization problem in Markov decision process (MDP) form, we propose a soft actor-critic (SAC) mechanism that captures the dynamics of the problem and optimizes its parameters. Additionally, regarding the high mobility of the UAV and thus remarkable rearrangement of the system, we enhance the trained SAC model by integrating a meta-learning strategy that enables more adaptation to system variations. By defining energy efficiency as a trade-off between the data rate and power consumption, simulations verify that upgrading a single-LED UAV by an array of 10 LEDs, exhibits 47 % and 34 % improvements in data rate and energy efficiency, albeit at the expense of 8 % more power consumption.

Unmanned aerial vehicles (UAVs) with multiple antennas have recently been explored to improve capacity in wireless networks. However, their strict energy constraint for simultaneously flying and communication tasks renders the exploration of energy-efficient multi-antenna techniques indispensable. Meanwhile, lens antenna subarrays (LASs) emerge as a promising energy-efficient multi-antenna structure that have not been previously harnessed for this purpose. In this paper, we propose a LAS-aided UAV to serve ground users in downlink transmission. We formulate a resource allocation problem aimed at initiating a trade-off between aggregate data rate of ground users and the power consumption of the UAV (energy efficiency) by optimizing the lens-based beamforming and flight trajectory of the UAV. To address this non-convex problem, we recast it in Markov decision process that captures its dynamic features and provides a framework to train an actor-critic agent. This agent is fine-tuned via hindsight experience replay for enhanced stabilization. As well, given the frequent mobility of the UAV, we fortify the trained agent with a meta-learning strategy, enhancing its adaptability to system variations. Numerically, more than 20% energy efficiency gain is achieved by incorporating a 4lens LAS for UAV, compared to its single-lens architecture in literature. Simulations also demonstrate that the proposed resource allocation strategy achieves significant superiority over counterparts in literature.

Optical wireless communication (OWC) systems with multiple light-emitting diodes (LEDs) have recently been benefited from the assistance of optical reflecting intelligent surface (ORIS) to support energy-limited devices via simultaneous lightweight information and power transfer (SLIPT). This article studies the application of rate splitting multiple access (RSMA) for effective interference management and enhancing the data rate of these systems. Regarding the considerable bandwidth of the OWC band and also considerable energy consumption of the multi-LED transmitter, we formulate an energy efficiency (EE) maximization problem to jointly optimize the system variables, including transmit beamforming, LED selection, rate adaptation and ORIS element association, while adhering to the system requirements. Accordingly, we propose a dynamic resource allocation mechanism, leveraging proximal policy optimization (PPO) to accommodate system dynamism and optimize its variables. Concerning the frequent obstruction of OWC Line-of-Sight (LoS) links and consequently swift system reconfiguration, we improve the adaptability and predictability of the PPO agent by integrating Meta-learning technique. Simulations reveal that the proposed Meta-PPO algorithm has superior performance compared to the PPO method in the presence of ORIS with 76% gain. Furthermore, employing an ORIS in the proposed system model improves the performance by 51% compared to a scenario without ORIS.

Downlink transmission of a nonorthogonal visible light communication (VLC) system, empowered by autonomous aerial vehicles (AAVs), is studied for coexisting enhanced mobile broadband (eMBB), ultrareliable low-latency communication (URLLC), and massive machine-type communication (mMTC) services. A joint resource allocation problem involving user association, transmit power, and flight trajectory of AAVs is formulated, with the goal of characterizing a multiobjective tradeoff as a weighted sum of the power consumption of each AAV and the perceived Quality of Experience (QoE) of its associated eMBB users, while ensuring the service-specific requirements for eMBB, mMTC, and URLLC are met. Assuming the imperfection of channel state information (CSI), we invoke a generalized Benders decomposition (GBD) methodology, leveraging tools from convex optimization and multiagent deep reinforcement learning to address this problem. We further analytically derive the upper and lower bounds on the reward function for each AAV as a learning agent. Extensive simulations confirm that our proposed method outperforms the single-agent counterpart in the literature, with up to a 22% reduction in power consumption and a 13% gain in perceived QoE. Additionally, compared to the globally optimal brute-force method for AAV-user association, our proposed method experiences only a trivial performance loss in a small-scale scenario.

In this paper, we consider the downlink transmission of a multi-antenna base station (BS) supported by an active simultaneously transmitting and reconfigurable intelligent surface (STAR-RIS) to serve single-antenna users via simultaneous wireless information and power transfer (SWIPT). In this context, we formulate an energy efficiency maximisation problem that jointly optimises the gain, element selection and phase shift matrices of the active STAR-RIS, the transmit beamforming of the BS and the power splitting ratio of the users. With respect to the highly coupled and non-convex form of this problem, an alternating optimisation solution approach is proposed, using tools from convex optimisation and reinforcement learning. Specifically, semi-definite relaxation (SDR), difference of convex functions (DC), and fractional programming techniques are employed to transform the non-convex optimisation problem into a convex form for optimising the BS beamforming vector and the power splitting ratio of the SWIPT. Then, by integrating meta-learning with the modified deep deterministic policy gradient (DDPG) and soft actor-critical (SAC) methods, a combinatorial reinforcement learning network is developed to optimise the element selection, gain and phase shift matrices of the active STAR-RIS. Our simulations show the effectiveness of the proposed resource allocation scheme. Furthermore, our proposed active STAR-RIS-based SWIPT system outperforms its passive counterpart by 57% on average.

Optical wireless communication (OWC) systems with multiple light-emitting diodes (LEDs) have recently been explored to support energy-limited devices via simultaneous lightwave information and power transfer (SLIPT). The energy consumption, however, becomes considerable by increasing the number of incorporated LEDs. This paper proposes a joint dimming (JD) scheme that lowers the consumed power of a SLIPT-enabled OWC system by controlling the number of active LEDs. We further enhance the data rate of this system by utilizing rate splitting multiple access (RSMA). More specifically, we formulate a data rate maximization problem to optimize the beamforming design, LED selection and RSMA rate adaptation that guarantees the power budget of the OWC transmitter, as well as the quality-of-service (QoS) and an energy harvesting level for users. We propose a dynamic resource allocation solution based on proximal policy optimization (PPO) reinforcement learning. In simulations, the optimal dimming level is determined to initiate a trade-off between the data rate and power consumption. It is also verified that RSMA significantly improves the data rate.

Mounting a reconfigurable intelligent surface (RIS) on an unmanned aerial vehicle (UAV) holds promise for improving traditional terrestrial network performance. Unlike conventional methods deploying passive RIS on UAVs, this study delves into the efficacy of an aerial active RIS (AARIS). Specifically, the downlink transmission of an AARIS network is investigated, where the base station (BS) leverages rate-splitting multiple access (RSMA) for effective interference management and benefits from the support of an AARIS for jointly amplifying and reflecting the BS’s transmit signals. Considering both the non-trivial energy consumption of the active RIS and the limited energy storage of the UAV, we propose an innovative element selection strategy for optimizing the on/off status of active RIS elements, which adaptively and remarkably manages the system’s power consumption. To this end, a resource management problem is formulated, aiming to maximize the system energy efficiency (EE) by jointly optimizing the transmit beamforming at the BS, the element activation, the phase shift and the amplification factor at the active RIS, the RSMA common data rate at users, as well as the UAV’s trajectory. Due to the dynamicity nature of UAV and user mobility, a deep reinforcement learning (DRL) algorithm is designed for resource allocation, utilizing meta-learning to adaptively handle fast time-varying system dynamics. According to simulations, integrating meta-learning yields a notable 36% increase in system EE. Additionally, substituting AARIS for fixed terrestrial active RIS results in a 26% EE enhancement.

Downlink transmission of non-orthogonal multiple access visible light communication systems empowered by an unmanned aerial vehicle (UAV) is considered for multiplexing enhanced mobile broadband (eMBB) and massive machine type communication (mMTC) services. Accordingly, a resource allocation problem of joint transmit power control and motion trajectory design of the DAVs is formulated, whose goal is to characterize a multi-objective trade-off as a weighted sum of the UAVs' power consumption and the perceived quality-of-experience (QoE) of eMBB users, while ensuring the eMBB and mMTC service-specific requirements. We leverage an alternative decomposition and tools from convex optimization and actorcritic multi-agent deep reinforcement learning to address this problem in an iterative fashion. We analytically derive the upper-and lower-bounds on the reward of the DAVs as the learning agents and demonstrate that the proposed resource allocation method outperforms the similar scheme in literature, by up to 17% average reduced power consumption, as well as 12% average perceived QoE gain.

Integrating the multitude of emerging internet of things (IoT) applications with diverse requirements in beyond fifth generation (B5G) networks necessitates the coexistence of enhanced mobile broadband (eMBB) and ultra-reliable low-latency communication (URLLC) services. However, bandwidth limited and congested sub-6GHz bands are incapable of fulfilling this coexistence. In this paper, we consider a reconfigurable intelligent surface (RIS)-aided wideband terahertz (THz) communication system to this end. In specific, we formulate a resource management problem, aiming at jointly optimizing the reflection coefficient of the RIS elements and the transmit power of the base station, as well as the wideband THz resource block allocation. To solve this problem, we adopt a supervised learning approach relying on optimization, deep learning and ensemble learning methods. Simulation results show that for an RIS of size$11\times 11$, up to 49% spectral efficiency gain is achieved for the eMBB service compared to the counterparts, while ensuring the reliability and latency requirements of the URLLC service. Further, the ensemble learning model can perform real-time resource management at the expense of up to 1% performance loss, compared to the optimization approach.

Passive beamforming in reconfigurable intelligent surfaces (RISs) enables a feasible and efficient way of communication when the RIS reflection coefficients are precisely adjusted. In this paper, we present a framework to track the RIS reflection coefficients with the aid of deep learning from a time-series prediction perspective in a terahertz (THz) communication system. The proposed framework achieves a two-step enhancement over the similar learning-driven counterparts. Specifically, in the first step, we train a liquid state machine (LSM) to track the historical RIS reflection coefficients at prior time steps (known as a time-series sequence) and predict their upcoming time steps. We also fine-tune the trained LSM through Xavier initialization technique to decrease the prediction variance, thus resulting in a higher prediction accuracy. In the second step, we use ensemble learning technique which leverages on the prediction power of multiple LSMs to minimize the prediction variance and improve the precision of the first step. It is numerically demonstrated that, in the first step, employing the Xavier initialization technique to fine-tune the LSM results in at most 26% lower LSM prediction variance and as much as 46% achievable spectral efficiency (SE) improvement over the existing counterparts, when an RIS of size 11×11 is deployed. In the second step, under the same computational complexity of training a single LSM, the ensemble learning with multiple LSMs degrades the prediction variance of a single LSM up to 66% and improves the system achievable SE at most 54%.

In this paper, we propose an intelligent analog beam selection strategy in a terahertz (THz) band beamspace multiple-input multiple-output (MIMO) system. First inspired by transfer learning, we fine-tune the pre-trained off-the-shelf GoogleNet classifier to learn analog beam selection as a multi-class mapping problem. Simulation results show 83% accuracy for the analog beam selection, which subsequently results in 12% spectral efficiency (SE) gain over the existing counterparts. For a more accurate classifier, we replace the conventional rectified linear unit (ReLU) activation function of the GoogleNet with the recently proposed Swish and retrain the fine-tuned GoogleNet to learn analog beam selection. It is numerically indicated that the fine-tuned Swish-driven GoogleNet achieves 86% accuracy, as well as 18% improvement in achievable SE, over the similar schemes. Eventually, a strong ensembled classifier is developed to learn analog beam selection by sequentially training multiple fine-tuned Swish-driven GoogleNet classifiers. According to the simulations, the strong ensembled model is 90% accurate and yields 27% gain in achievable SE in comparison with prior methods.

In this paper, we propose an accurate two-phase millimeter-Wave (mmWave) beamspace channel tracking mechanism. Particularly in the first phase, we train an extreme reservoir machine (ERM) for tracking the historical features of the mmWave beamspace channel and predicting them in upcoming time steps. Towards a more accurate prediction, we further fine-tune the ERM by means of Xavier initializer technique, whereby the input weights in ERM are initially derived from a zero mean and finite variance Gaussian distribution, leading to 49% degradation in prediction variance of the conventional ERM. The proposed method numerically improves the achievable spectral efficiency (SE) of the existing counterparts, by 13%, when signal-to-noise-ratio (SNR) is 15dB. We further investigate an ensemble learning technique in the second phase by sequentially incorporating multiple ERMs to form an ensembled model, namely adaptive boosting (AdaBoost), which further reduces the prediction variance in conventional ERM by 56%, and concludes in 21% enhancement of achievable SE upon the existing schemes at SNR = 15dB.

In this paper, we consider unmanned aerial vehicles (UAVs) equipped with a visible light communication (VLC) access point and coordinated multipoint (CoMP) capability that allows users to connect to more than one UAV. UAVs can move in 3-dimensional (3D) at a constant acceleration, where a central server is responsible for synchronization and cooperation among UAVs. The effect of accelerated movement in UAV is necessary to be considered. Unlike most existing works, we examine the effects of variable speed on kinetics and radio resource allocations. For the proposed system model, we define two different time scales. In the frame, the acceleration of each UAV is specified, and in each slot, radio resources are allocated. Our goal is to formulate a multi-objective optimization problem where the total data rate is maximized, and the total communication power consumption is minimized simultaneously. To handle this multi-objective optimization, we first apply the scalarization method and then apply multi-agent deep deterministic policy gradient (MADDPG). We improve this solution method by adding two critic networks together with two-stage resource allocation.

In this paper, a novel method is proposed to study the tradeoff between energy efficiency (EE) of small-cell users and unmanned aerial vehicles (UAV) users in multi-cell orthogonal frequency division multiple access (OFDMA)-based networks. Contrary to the prior works that only maximize the EE of the UAV network subject to some constraints on transmit power of UAV users, we formulate a multi-objective optimization problem (MOOP) that jointly maximize the EE of small-cell and UAV users while guaranteeing the minimum rate for UAV users as well as maximum transmit powers for the corresponding small-cell and UAV BSs. The proposed MOOP is transformed into a single optimization problem (SOOP) by the weighted Tchebycheff approach. Then, an iterative technique is used to optimize alternatively subchannels and transmission powers of small-cell and UAV networks at each step. Numerical results show that a substantial performance gain can be obtained over the existing solutions.

In this paper, we formulate two multi-objective optimization problems (MOOPs) in orthogonal frequency-division multiple access (OFDMA)-based in-band full-duplex (IBFD) wireless communications. The aim of this study is to exploit the performance trade-off between uplink and downlink where a wireless radio simultaneously transmits and receives in the same frequency. We consider maximizing the system throughput as the first MOOP and minimizing the system aggregate power consumption as the second MOOP between uplink and downlink, while taking into account the impact of self-interference (SI) and quality of service provisioning. We study the throughput and the transmit power trade-off between uplink and downlink via solving these two problems. Each MOOP is a nonconvex mixed integer non-linear programming (MINLP) which is generally intractable. In order to circumvent this difficulty, a penalty function is introduced to reformulate the problem into a mathematically tractable form. Subsequently, each MOOP is transformed into a single-objective optimization problem (SOOP) via the weighted Tchebycheff method which is addressed by majorization-minimization (MM) approach. Simulation results demonstrate an interesting trade-off between the considered competing objectives.

This paper aims at investigating the problem of energy efficiency (EE) maximization for uplink multi-cell networks via a joint design of sub-channel assignment, power control, and antenna selection. We study the problem under two practical scenarios. In the first scenario, known as conventional antenna selection (CAS), there is only one radio frequency (RF) chain available at the mobile user and all the sub-channels for each user can be assigned to one of the antennas. For the second scenario, known as generalized antenna selection (GAS), the number of RF chains is equal to the number of antennas and the messages of each user can transmit over its assigned sub-channels via different antennas. The resource allocation design is formulated as a multi-objective optimization problem (MOOP) and then converted into a single objective optimization problem (SOOP) via the weighted Tchebycheff method. The considered problem is a mixed integer nonlinear programming (MINLP) which is generally intractable. To address this problem, a penalty function is introduced to handle the binary variable constraints. In order to obtain a computationally efficient suboptimal solution, the majorization minimization (MM) approach is proposed where a surrogate function serves as the lower bound of the objective function. Furthermore, we propose another low-complexity practical algorithm to further reduce the computational cost. Simulation results demonstrate the superiority of the proposed method and unveil an interesting trade-off between EE and SE for two considered scenarios.

In this paper, we develop and analyze a novel performance metric, called interference efficiency, which shows the number of transmitted bits per unit of interference energy imposed on the primary users (PUs) in an underlay cognitive radio network (CRN). Specifically, we develop a framework to maximize the interference efficiency of a CRN with multiple secondary users (SUs) while satisfying target constraints on the average interference power, total transmit power, and minimum ergodic rate for the SUs. In doing so, we formulate a multiobjective optimization problem (MOP) that aims to maximize ergodic sum rate of SUs and to minimize average interference power on the primary receiver. We solve the MOP by first transferring it into a single objective problem (SOP) using a weighted sum method. Considering different scenarios in terms of channel state information (CSI) availability to the SU transmitter, we investigate the effect of CSI on the performance and power allocation of the SUs. When full CSI is available, the formulated SOP is nonconvex and is solved using augmented penalty method (also known as the method of multiplier). When only statistical information of the channel gains between the SU transmitters and the PU receiver is available, the SOP is solved using Lagrangian optimization. Numerical results are conducted to corroborate our theoretical analysis.

In this paper, we investigate the achievable energy efficiency of cognitive radio networks where two main modes are of interest, namely, spectrum sharing (known as underlay paradigm) and spectrum sensing (or interweave paradigm). In order to improve the energy efficiency, we formulate a new multiobjective optimization problem that jointly maximizes the ergodic capacity and minimizes the average transmission power of the secondary user network while limiting the average interference power imposed on the primary user receiver. The multiobjective optimization will be solved by first transferring it into a single objective problem (SOP), namely, a power minimization problem, by using the ε-constraint method. The formulated SOP will be solved using two different methods. Specifically, the minimum power allocation at the secondary transmitter in a spectrum sharing fading environment are obtained using the iterative search-based solution and augmented Lagrangian approach for single and multiple secondary links, respectively. The significance of having extra side information and also imperfect side information of cross channels at the secondary transmitter are investigated. The minimum power allocations under perfect and imperfect sensing schemes in interweave cognitive radio networks are also found. Our numerical results provide guidelines for the design of future cognitive radio networks.

In this paper, we propose several power allocation strategies in cognitive radio network in terms of spectrum sharing. In spectrum sharing, secondary users can simultaneously transmit with the primary users but must strictly control their transmit power to avoid harmful interference to primary users. In this paper, we first maximize the ergodic capacity of a secondary link with full channel side information at the secondary transmitter. Then, different levels of channel side information are separately reduced to discuss the significance of having each level at the secondary transmitter. In most cases, we derived closed-form results for evaluating the maximum capacity over Rayleigh fading channels.

This paper presents a theoretical investigation of the spectral efficiency of a shared wireless channel. A large number of narrow bandlimited users share a common wideband channel with no cooperation between them. We derive an exact expression for the spectral efficiency of the shared spectrum when each user treats the interference from other signals as an additive noise. These new expressions are used to investigate the effects of non-orthogonal channel spacing on the overall spectral and area-spectral efficiencies of shared wireless channels. As far as the spectral efficiency in bits per second per Hertz is concerned, our results reveal that there is actually no gain that can be achieved with the channelization of the shared wideband channel. In contrast, when raised-cosine spectra are used, it shown that channelization results in a more than 21% loss in the spectral efficiency, and that it is more efficient to let users transmit arbitrarily at the shared wideband channel without channelization.

In spectrum sharing channels, a secondary user can simultaneously transmit data with a primary user as long as the so called interference temperature limit is kept less than a certain permissible level. In this paper, we consider a spectrum sharing scenario over a Nakagami-m fading channel, and formulate a minimization problem for the average bit error rate (BER) that can be achieved by a secondary user while keeping the interference level introduced to the primary user below a given threshold. We derive new results for the minimum average BER under either average or peak interference power constraints at the primary receiver. This paper also investigates the significance of having extra side information on the status of different channels at the secondary transmitter. Finally, the impact of posing additional constraints on the transmit power at the secondary transmitter is discussed via numerical results.

This paper is concerned with the design of optimal power allocation strategies in opportunistic spectrum-sharing wireless channels where secondary users are allowed to coexist with the primary users as long as the interference they caused to the primary user is less than a predefined threshold level. We formulate and solve several minimization problems for the average BER experienced by a secondary transmitter-receiver pair under different average and peak interference power constraints at the primary receiver. New closed-form results for the average minimum BERs are derived over Nakagami fading channels for most cases examined. The other contribution of this work lies in reducing extra channel side information at the secondary transmitter, which has very minimal impact on the BER of the secondary link.

In this paper, we design optimal power allocation in cognitive radio in terms of spectrum sharing where secondary users concurrently transmit with primary users over the same band subject to an interference threshold constraint at primary receivers. The average bit error rate (BER) of the secondary link is minimized under either average or peak interference power constraint of secondary users at the primary's receiver. We derive closed-form expression for evaluating the minimum average BER under Nakagami channels. Furthermore, by numerical results, we show that reducing extra channel side information (CSI) which can be provided at the secondary transmitter has a small impact on the bit error rate.

In this paper, we evaluate the total ergodic capacity of channels in an ad-hoc cognitive radio network under interference constraint at the primary users. It is assumed that all links associated with primary and secondary networks experience Rayleigh fading. First, interference from only primary transmitters is discussed. In such case, the optimum power allocation scheme and the ergodic capacity are derived under average interference power constraint. This paper is also extended to include the impact of interference from both primary transmitters and other secondary transmitters. Then, we propose the iterative algorithm to maximize the total capacity due to non-convexity of the objective function. The effect of different types of interference is investigated via numerical analysis.