By means of the emerging technique of dynamic Time Division Duplex (TDD), the switching point between uplink and downlink transmissions can be optimized across a multi-cell system in order to reduce the impact of inter-cell interference. It has been recently recognized that optimizing also the order in which uplink and downlink transmissions, or more generally the two directions of a two-way link, are scheduled can lead to significant benefits in terms of interference reduction. In this work, the optimization of bi-directional scheduling is investigated in conjunction with the design of linear precoding and equalization for a general multi-link MIMO two-way system. A simple algorithm is proposed that performs the joint optimization of the ordering of the transmissions in the two directions of the two-way links and of the linear transceivers, with the aim of minimizing the interference leakage power. Numerical results demonstrate the effectiveness of the proposed strategy.

In various wireless systems, such as sensor RFID networks and body area networks with implantable devices, the transmitted signals are simultaneously used both for information transmission and for energy transfer. In order to satisfy the conflicting requirements on information and energy transfer, this paper proposes the use of constrained run-length limited (RLL) codes in lieu of conventional unconstrained (i.e, random-like) capacity-achieving codes. The receiver's energy utilization requirements are modeled stochastically, and constraints are imposed on the probabilities of battery underflow and overflow at the receiver. It is demonstrated that the codewords' structure afforded by the use of constrained codes enables the transmission strategy to be better adjusted to the receiver's energy utilization pattern, as compared to classical unstructured codes. As a result, constrained codes allow a wider range of trade-offs between the rate of information transmission and the performance of energy transfer to be achieved.

In various wireless systems, such as sensor RFID networks and body area networks with implantable devices, the transmitted signals are simultaneously used both for information transmission and for energy transfer. To satisfy the conflicting requirements on information and energy transfer, this paper proposes the use of constrained run-length limited (RLL) codes in lieu of conventional unconstrained (i.e., random-like) capacity-achieving codes. The receiver's energy utilization requirements are modeled stochastically, and constraints are imposed on the probabilities of battery underflow and overflow at the receiver. It is demonstrated that the codewords' structure afforded by the use of constrained codes enables the transmission strategy to be better adjusted to the receiver's energy utilization pattern, as compared to classical unstructured codes. As a result, constrained codes allow a wider range of trade-offs between the rate of information transmission and the performance of energy transfer to be achieved.

In some communication networks, such as passive RFID systems, the energy used to transfer information between a sender and a recipient can be reused for successive communication tasks. In fact, from known results in physics, any system that exchanges information via the transfer of given physical resources, such as radio waves, particles and qubits, can conceivably reuse, at least part, of the received resources. This paper aims at illustrating some of the new challenges that arise in the design of communication networks in which the signals exchanged by the nodes carry both information and energy. To this end, a baseline two-way communication system is considered in which two nodes communicate in an interactive fashion. In the system, a node can either send an "onquotedblright symbol (or "1quotedblright), which costs one unit of energy, or an "offquotedblright signal (or "0quotedblright), which does not require any energy expenditure. Upon reception of a "1quotedblright signal, the recipient node "harvestsquotedblright, with some probability, the energy contained in the signal and stores it for future communication tasks. Inner and outer bounds on the achievable rates are derived. Numerical results demonstrate the effectiveness of the proposed strategies and illustrate some key design insights.