The Value Iteration Network (VIN) is an end-to-end differentiable neural network architecture for planning. It exhibits strong generalization to unseen domains by incorporating a differentiable planning module that operates on a latent Markov Decision Process (MDP). However, VINs struggle to scale to long-term and large-scale planning tasks, such as navigating a $100\times 100$ maze---a task that typically requires thousands of planning steps to solve. We observe that this deficiency is due to two issues: the representation capacity of the latent MDP and the planning module's depth. We address these by augmenting the latent MDP with a dynamic transition kernel, dramatically improving its representational capacity, and, to mitigate the vanishing gradient problem, introduce an "adaptive highway loss" that constructs skip connections to improve gradient flow. We evaluate our method on 2D/3D maze navigation environments, continuous control, and the real-world Lunar rover navigation task. We find that our new method, named Dynamic Transition VIN (DT-VIN), scales to 5000 layers and solves challenging versions of the above tasks. Altogether, we believe that DT-VIN represents a concrete step forward in performing long-term large-scale planning in complex environments.

The family of probabilistic values, axiomatically-grounded in cooperative game theory, has recently received much attention in data valuation. However, it is often computationally expensive to compute exactly (exponential w.r.t. the number of data to valuate denoted by $n$). The existing generic estimator costs $O(n^2\log n)$ utility evaluations to achieve an $(\epsilon,\delta)$-approximation under the 2-norm, while faster estimators have been developed recently for special cases (e.g., empirically for the Shapley value and theoretically for the Banzhaf value). In this work, starting from the discovered connection between probabilistic values and least square regressions, we propose a Generic Estimator based on Least Squares (GELS) along with its variants that cost $O(n\log n)$ utility evaluations for many probabilistic values, largely extending the scope of this currently best complexity bound. Moreover, we show that each distributional value, proposed by Ghorbani et al. (2020) to alleviate the inconsistency of probabilistic values induced by using distinct databases, can also be cast as optimizing a similar least square regression. This observation leads to a theoretically-grounded framework TrELS (Training Estimators based on Least Squares) that can train estimators towards the specified distributional values without requiring any supervised signals. Particularly, the trained estimators are capable of predicting the corresponding distributional values for unseen data, largely saving the budgets required for running Monte-Carlo methods otherwise. Our experiments verify the faster convergence of GELS, and demonstrate the effectiveness of TrELS in learning distributional values. Our code is available at https://github.com/watml/fastpvalue.

Value iteration networks (VINs) enable end-to-end learning for planning tasks by employing a differentiable "planning module" that approximates the value iteration algorithm. However, long-term planning remains a challenge because training very deep VINs is difficult. To address this problem, we embed highway value iteration—a recent algorithm designed to facilitate long-term credit assignment—into the structure of VINs. This improvement augments the "planning module" of the VIN with three additional components: 1) an "aggregate gate," which constructs skip connections to improve information flow across many layers; 2) an "exploration module," crafted to increase the diversity of information and gradient flow in spatial dimensions; 3) a "filter gate" designed to ensure safe exploration. The resulting novel highway VIN can be trained effectively with hundreds of layers using standard backpropagation. In long-term planning tasks requiring hundreds of planning steps, deep highway VINs outperform both traditional VINs and several advanced, very deep NNs.

The concept of probabilistic values, such as Beta Shapley values and weighted Banzhaf values, has gained recent attention in applications like feature attribution and data valuation. However, exact computation of these values is often exponentially expensive, necessitating approximation techniques. Prior research has shown that the choice of probabilistic values significantly impacts downstream performance, with no universally superior option. Consequently, one may have to approximate multiple candidates and select the best-performing one. Although there have been many efforts to develop efficient estimators, none are intended to approximate all probabilistic values both simultaneously and efficiently. In this work, we embark on the first exploration of achieving this goal. Adhering to the principle of maximum sample reuse and avoiding amplifying factors, we propose a one-sample-fits-all framework parameterized by a sampling vector to approximate intermediate terms that can be converted to any probabilistic value. Leveraging the concept of $ (\epsilon, \delta) $-approximation, we theoretically identify a key formula that effectively determines the convergence rate of our framework. By optimizing the sampling vector using this formula, we obtain i) a one-for-all estimator that achieves the currently best time complexity for all probabilistic values on average, and ii) a faster generic estimator with the sampling vector optimally tuned for each probabilistic value. Particularly, our one-for-all estimator achieves the fastest convergence rate on Beta Shapley values, including the well-known Shapley value, both theoretically and empirically. Finally, we establish a connection between probabilistic values and the least square regression used in (regularized) datamodels, showing that our one-for-all estimator can solve a family of datamodels simultaneously. Our code is available at https://github.com/watml/one-for-all.

Data valuation, a principled way to rank the importance of each training datum, has become increasingly important. However, existing value-based approaches (e.g., Shapley) are known to suffer from the stochasticity inherent in utility functions that render consistent and reliable ranking difficult. Recently, Wang and Jia (2023) proposed the noise-structure-agnostic framework to advocate the Banzhaf value for its robustness against such stochasticity as it achieves the largest safe margin among many alternatives. Surprisingly, our empirical study shows that the Banzhaf value is not always the most robust when compared with a broader family: weighted Banzhaf values. To analyze this scenario, we introduce the concept of Kronecker noise to parameterize stochasticity, through which we prove that the uniquely robust semi-value, which can be analytically derived from the underlying Kronecker noise, lies in the family of weighted Banzhaf values while minimizing the worst-case entropy. In addition, we adopt the maximum sample reuse principle to design an estimator to efficiently approximate weighted Banzhaf values, and show that it enjoys the best time complexity in terms of achieving an $(\epsilon, \delta)$-approximation. Our theory is verified under both synthetic and authentic noises. For the latter, we fit a Kronecker noise to the inherent stochasticity, which is then plugged in to generate the predicted most robust semi-value. Our study suggests that weighted Banzhaf values are promising when facing undue noises in data valuation.

Abstract The main challenge of Multiple Object Tracking (MOT) is that there is great uncertainty in data association when using the tracked predicted values and tracked trajectories. Meanwhile, the MOT is complex and time‐consuming. When equipment resources are limited or real‐time requirement is high, its application is very limited. Therefore, we propose a Lightweight Deep Appearance Embedding (LDAE) to assist the association of trajectories. Firstly, in addition to motion information in data association, we also introduce more discriminative appearance features to participate in the affinity measure to effectively distinguish similar targets. Secondly, according to the idea of feature mapping, we design a lightweight deep appearance embedding module. It can help extract appearance features with less computation. Finally, we propose a simulated occlusion strategy for the training of the LDAE, which helps improve the ability to recognise different targets in dense scenes. The LDAE dramatically reduces the computational cost and improves the accuracy of data association. Extensive experiments are conducted on the MOT datasets (MOT16, MOT17 and MOT20), which prove that the LDAE outperforms several state‐of‐the‐art trackers in the tracking accuracy and anti‐occlusion performance. Furthermore, we apply the LDAE to escalators, which can achieve fast and stable tracking effect.

Aggregating multi-subject functional magnetic resonance imaging (fMRI) data is indispensable for generating valid and general inferences from patterns distributed across human brains. The disparities in anatomical structures and functional topographies of human brains warrant aligning fMRI data across subjects. However, the existing functional alignment methods cannot handle well various kinds of fMRI datasets today, especially when they are not temporally-aligned, i.e., some of the subjects probably lack the responses to some stimuli, or different subjects might follow different sequences of stimuli. In this paper, a cross-subject graph that depicts the (dis)similarities between samples across subjects is used as a priori for developing a more flexible framework that suits an assortment of fMRI datasets. However, the high dimension of fMRI data and the use of multiple subjects makes the crude framework time-consuming or unpractical. To address this issue, we further regularize the framework, so that a novel feasible kernel-based optimization, which permits non-linear feature extraction, could be theoretically developed. Specifically, a low-dimension assumption is imposed on each new feature space to avoid overfitting caused by the high-spatial-low-temporal resolution of fMRI data. Experimental results on five datasets suggest that the proposed method is not only superior to several state-of-the-art methods on temporally-aligned fMRI data, but also suitable for dealing with temporally-unaligned fMRI data.

Robots become more and more widely used in medical application especially in minimally invasive surgery (MIS) these years, and endoscope robot is a typical example. There is sill not a kind of conventional endoscope which can reach the whole gastrointestinal (GI) tract. And conventional endoscopes generate pain and discomfort to patients due to the stiffness of their body. Such disadvantages do not exist in endoscope robots. However, the soft and elastic characters of GI tract make the locomotion efficiency of endoscope robot very low. To resolve this problem, it is necessary to find a special locomotion principle which fit the GI tract, and many researchers have paid a lot of effort. In this paper, a novel locomotion principle is proposed, which is the first time used in the endoscope robot. The locomotion principle is obtained by analyzing, simulating and simplifying the movement of mucus-cilia system. To evaluate its performance, a prototype of the endoscope robot adopting this locomotion principle is developed, which is driven by shape memory alloy (SMA) actuator. An in-vitro experiment shows that the robot can move successfully with efficiency about 27%. The result of experiment validates that the proposed locomotion principle fit the GI tract. And some suggestions to enhance the locomotion efficiency are proposed