The efficiency and cost of silicon physically unclonable function (PUF)-based applications, and in particular key generators, are heavily impacted by the level of reproducibility of the bare PUF responses (PRs) under varying operational circumstances. Error-correcting codes (ECCs) can be used to achieve near-perfect reliability, but come at a high implementation cost especially when the underlying PUF is very noisy. When designing a PUF-based key generator, a more reliable PUF will result in a less complex ECC decoder and a smaller PUF footprint, and hence, an overall more efficient implementation. This paper proposes novel insight and resulting method for reducing noise on memory-based PRs, based on adapting supply voltage ramp-up time to ambient temperature. Circuit simulations on 45 nm low-power CMOS, as well as silicon measurements are presented to validate the proposed method. Our results demonstrate that choosing an appropriate voltage ramp-up for enrollment and adapting it according to the ambient temperature at key-reconstruction is a powerful method which makes memory-based PR noise up to 3× smaller. In addition, this paper investigates the competitiveness of integrating the proposed method in a commercial product; the investigation is done in two phases. First by determining the saved area, and second by implementing a circuit that maps the ambient temperature into an appropriate voltage ramp-up. The results show that the new system costs up to 82.1% less area while it delivers up to 3× higher reproducibility.

Design for test is an integral part of any VLSI chip. However, for secure systems extra precautions have to be taken to prevent that the test circuitry could reveal secret information. This paper addresses secure test for Physical Unclonable Function based systems. In particular it provides the testability analysis and a secure Built-In Self-Test (BIST) solution for Fuzzy Extractor (FE) which is the main component of PUF-based systems. The scheme targets high stuck-at-fault (SAF) coverage by performing scan-chain free functional testing, to prevent scan-chain abuse for attacks. The scheme reuses existing FE sub-blocks (for pattern generation and compression) to minimize the area overhead. The scheme is integrated in FE design and simulated; the results show that a SAF fault coverage of 95.1% can be realized with no more than 50k clock cycles at the cost of a negligible area overhead of only 2.2%. Higher fault coverage is possible to realize at extra cost.