This paper introduces an anthropomorphic robot hand built entirely using LEGO MINDSTORMS: the Educational SoftHand-A, a tendon-driven, highly-underactuated robot hand based on the Pisa/IIT SoftHand and related hands. To be suitable for an educational context, the design is constrained to use only standard LEGO pieces with tests using common equipment available at home. The hand features dual motors driving an agonist/antagonist opposing pair of tendons on each finger, which are shown to result in reactive fine control. The finger motions are synchonized through soft synergies, implemented with a differential mechanism using clutch gears. Altogether, this design results in an anthropomorphic hand that can adaptively grasp a broad range of objects using a simple actuation and control mechanism. Since the hand can be constructed from LEGO pieces and uses state-of-the-art design concepts for robotic hands, it has the potential to educate and inspire children to learn about the frontiers of modern robotics.

This paper presents a shear-based control scheme for grasping and manipulating delicate objects with a Pisa/IIT anthropomorphic SoftHand equipped with soft biomimetic tactile sensors on all five fingertips. These ‘microTac’ tactile sensors are miniature versions of the TacTip vision-based tactile sensor, and can extract precise contact geometry and force information at each fingertip for use as feedback into a controller to modulate the grasp while a held object is manipulated. Using a parallel processing pipeline, we asynchronously capture tactile images and predict contact pose and force from multiple tactile sensors. Consistent pose and force models across all sensors are developed using supervised deep learning with transfer learning techniques. We then develop a grasp control framework that uses contact force feedback from all fingertip sensors simultaneously, allowing the hand to safely handle delicate objects even under external disturbances. This control framework is applied to several grasp-manipulation experiments: first, retaining a flexible cup in a grasp without crushing it under changes in object weight; second, a pouring task where the center of mass of the cup changes dynamically; and third, a tactile-driven leader-follower task where a human guides a held object. These manipulation tasks demonstrate more human- like dexterity with underactuated robotic hands by using fast reflexive control from tactile sensing.

Imitation learning for robot dexterous manipulation, especially with a real robot setup, typically requires a large number of demonstrations. In this paper, we present a data-efficient learning from demonstration framework which exploits the use of rich tactile sensing data and achieves fine bimanual pinch grasping. Specifically, we employ a convolutional autoencoder network that can effectively extract and encode high-dimensional tactile information. Further, we develop a framework that achieves efficient multi-sensor fusion for imitation learning, allowing the robot to learn contact-aware sensorimotor skills from demonstrations. The ablation studies on encoded tactile features highlighted the effectiveness of incorporating rich contact information, which enabled dexterous bimanual grasping with active contact searching. Extensive experiments demonstrated the robustness of the fine pinch grasp policy directly learned from few-shot demonstration, including grasping of the same object with different initial poses, generalizing to ten unseen new objects, robust and firm grasping against external pushes, as well as contact-aware and reactive re-grasping in case of dropping objects under very large perturbations. Furthermore, the saliency map analysis method is used to describe weight distribution across various modalities during pinch grasping, confirming the effectiveness of our framework at leveraging multimodal information. The video is available online at: https://youtu.be/BlzxGgiKfck.

This paper presents a control scheme for force sensitive, gentle grasping with a Pisa/IIT anthropomorphic SoftHand equipped with a miniaturised version of the TacTip optical tactile sensor on all five fingertips. The tactile sensors provide high-resolution information about a grasp and how the fingers interact with held objects. We first describe a series of hardware developments for performing asynchronous sensor data acquisition and processing, resulting in a fast control loop sufficient for real-time grasp control. We then develop a novel grasp controller that uses tactile feedback from all five fingertip sensors simultaneously to gently and stably grasp 43 objects of varying geometry and stiffness, which is then applied to a human-to-robot handover task. These developments open the door to more advanced manipulation with underactuated hands via fast reflexive control using high-resolution tactile sensing.

A human-inspired hand-over control strategy is proposed for the haptic interaction of two dual-fingered hands for the planar case. It is based on a grasp controller for an unknown object which achieves, via fingertip rolling, a stable grasp and a real object mass estimation. Object load transfer is receiver initiated, follows human evidence and involves awareness of the other hand's state based solely on local proprioceptive measurements. Simulation results illustrate the proposed approach.

This paper proposes a controller for the stable grasp of an arbitrary-shaped object on the horizontal plane by two robotic fingers with rigid hemispherical fingertips. The controller stabilizes the grasp with optimal force angles and desired finger shaping determined through the choice of a control constant without requiring the utilization of any contact information regarding contact locations and contact angles or any estimates of them. Simulation results demonstrate the performance of the proposed controller and show its clear advantages with respect to other known control schemes.

In this paper a simple tracking controller for a variable stiffness joint is proposed. System dynamics is considered unknown. The controller guarantees link and stiffness motor position performance specifications that have been apriori set, utilizing full state feedback. Simulation results on the previously published CompAct-VSA joint validate the efficiency of the proposed control approach.