Recently, technologies such as face detection, facial landmark localisation and face recognition and verification have matured enough to provide effective and efficient solutions for imagery captured under arbitrary conditions (referred to as "in-the-wild"). This is partially attributed to the fact that comprehensive "in-the-wild" benchmarks have been developed for face detection, landmark localisation and recognition/verification. A very important technology that has not been thoroughly evaluated yet is deformable face tracking "in-the-wild". Until now, the performance has mainly been assessed qualitatively by visually assessing the result of a deformable face tracking technology on short videos. In this paper, we perform the first, to the best of our knowledge, thorough evaluation of state-of-the-art deformable face tracking pipelines using the recently introduced 300 VW benchmark. We evaluate many different architectures focusing mainly on the task of on-line deformable face tracking. In particular, we compare the following general strategies: (a) generic face detection plus generic facial landmark localisation, (b) generic model free tracking plus generic facial landmark localisation, as well as (c) hybrid approaches using state-of-the-art face detection, model free tracking and facial landmark localisation technologies. Our evaluation reveals future avenues for further research on the topic.

3D Morphable Models (3DMMs) are powerful statistical models of 3D facial shape and texture, and are among the state-of-the-art methods for reconstructing facial shape from single images. With the advent of new 3D sensors, many 3D facial datasets have been collected containing both neutral as well as expressive faces. However, all datasets are captured under controlled conditions. Thus, even though powerful 3D facial shape models can be learnt from such data, it is difficult to build statistical texture models that are sufficient to reconstruct faces captured in unconstrained conditions ("in-the-wild"). In this paper, we propose the first "in-the-wild" 3DMM by combining a statistical model of facial identity and expression shape with an "in-the-wild" texture model. We show that such an approach allows for the development of a greatly simplified fitting procedure for images and videos, as there is no need to optimise with regards to the illumination parameters. We have collected three new benchmarks that combine "in-the-wild" images and video with ground truth 3D facial geometry, the first of their kind, and report extensive quantitative evaluations using them that demonstrate our method is state-of-the-art.

Model-free tracking is a well-studied task in computer vision. Typically, a rectangular bounding box containing a single object is provided in the first (few) frame(s) and then the method tracks the object in the rest frames. However, for deformable objects (e.g. faces, bodies) the single bounding box scenario is sub-optimal; a part-based approach would be more effective. The current state-of-the-art part-based approach is incrementally trained discriminative Deformable Part Models (DPM). Nevertheless, training discriminative DPMs with one or a few examples poses a huge challenge. We argue that a generative model is a better fit for the task. We utilise the powerful pictorial structures, which we augment with incremental updates to account for object adaptations. Our proposed incremental pictorial structures, which we call IPST, are experimentally validated in different scenarios. In a thorough experimentation we demonstrate that IPST outperforms the existing model-free methods in facial landmark tracking, body tracking, animal tracking (newly introduced to verify the strength in ad hoc cases).

3D Morphable Models (3DMMs) are powerful statistical models of 3D facial shape and texture, and among the state-of-the-art methods for reconstructing facial shape from single images. With the advent of new 3D sensors, many 3D facial datasets have been collected containing both neutral as well as expressive faces. However, all datasets are captured under controlled conditions. Thus, even though powerful 3D facial shape models can be learnt from such data, it is difficult to build statistical texture models that are sufficient to reconstruct faces captured in unconstrained conditions (in-the-wild). In this paper, we propose the first, to the best of our knowledge, in-the-wild 3DMM by combining a powerful statistical model of facial shape, which describes both identity and expression, with an in-the-wild texture model. We show that the employment of such an in-the-wild texture model greatly simplifies the fitting procedure, because there is no need to optimise with regards to the illumination parameters. Furthermore, we propose a new fast algorithm for fitting the 3DMM in arbitrary images. Finally, we have captured the first 3D facial database with relatively unconstrained conditions and report quantitative evaluations with state-of-the-art performance. Complementary qualitative reconstruction results are demonstrated on standard in-the-wild facial databases.

In this paper we propose to learn a mapping from image pixels into a dense template grid through a fully convolutional network. We formulate this task as a regression problem and train our network by leveraging upon manually annotated facial landmarks "in-the-wild". We use such landmarks to establish a dense correspondence field between a three-dimensional object template and the input image, which then serves as the ground-truth for training our regression system. We show that we can combine ideas from semantic segmentation with regression networks, yielding a highly-accurate quantized regression architecture. Our system, called DenseReg, allows us to estimate dense image-to-template correspondences in a fully convolutional manner. As such our network can provide useful correspondence information as a stand-alone system, while when used as an initialization for Statistical Deformable Models we obtain landmark localization results that largely outperform the current state-of-the-art on the challenging 300W benchmark. We thoroughly evaluate our method on a host of facial analysis tasks, and demonstrate its use for other correspondence estimation tasks, such as the human body and the human ear. DenseReg code is made available at http://alpguler.com/DenseReg.html along with supplementary materials.

Cascaded regression has recently become the method of choice for solving non-linear least squares problems such as deformable image alignment. Given a sizeable training set, cascaded regression learns a set of generic rules that are sequentially applied to minimise the least squares problem. Despite the success of cascaded regression for problems such as face alignment and head pose estimation, there are several shortcomings arising in the strategies proposed thus far. Specifically, (a) the regressors are learnt independently, (b) the descent directions may cancel one another out and (c) handcrafted features (e.g., HoGs, SIFT etc.) are mainly used to drive the cascade, which may be sub-optimal for the task at hand. In this paper, we propose a combined and jointly trained convolutional recurrent neural network architecture that allows the training of an end-to-end to system that attempts to alleviate the aforementioned drawbacks. The recurrent module facilitates the joint optimisation of the regressors by assuming the cascades form a nonlinear dynamical system, in effect fully utilising the information between all cascade levels by introducing a memory unit that shares information across all levels. The convolutional module allows the network to extract features that are specialised for the task at hand and are experimentally shown to outperform hand-crafted features. We show that the application of the proposed architecture for the problem of face alignment results in a strong improvement over the current state-of-the-art.

Typically, the problems of spatial and temporal alignment of sequences are considered disjoint. That is, in order to align two sequences, a methodology that (non)-rigidly aligns the images is first applied, followed by temporal alignment of the obtained aligned images. In this paper, we propose the first, to the best of our knowledge, methodology that can jointly spatio-temporally align two sequences, which display highly deformable texture-varying objects. We show that by treating the problems of deformable spatial and temporal alignment jointly, we achieve better results than considering the problems independent. Furthermore, we show that deformable spatio-temporal alignment of faces can be performed in an unsupervised manner (i.e., without employing face trackers or building person-specific deformable models).

During the past few years we have witnessed the development of many methodologies for building and fitting Statistical Deformable Models (SDMs). The construction of accurate SDMs requires careful annotation of images with regards to a consistent set of landmarks. However, the manual annotation of a large amount of images is a tedious, laborious and expensive procedure. Furthermore, for several deformable objects, e.g. human body, it is difficult to define a consistent set of landmarks, and, thus, it becomes impossible to train humans in order to accurately annotate a collection of images. Nevertheless, for the majority of objects, it is possible to extract the shape by object segmentation or even by shape drawing. In this paper, we show for the first time, to the best of our knowledge, that it is possible to construct SDMs by putting object shapes in dense correspondence. Such SDMs can be built with much less effort for a large battery of objects. Additionally, we show that, by sampling the dense model, a part-based SDM can be learned with its parts being in correspondence. We employ our framework to develop SDMs of human arms and legs, which can be used for the segmentation of the outline of the human body, as well as to provide better and more consistent annotations for body joints.

The two predominant families of deformable models for the task of face alignment are: (i) discriminative cascaded regression models, and (ii) generative models optimised with Gauss-Newton. Although these approaches have been found to work well in practise, they each suffer from convergence issues. Cascaded regression has no theoretical guarantee of convergence to a local minimum and thus may fail to recover the fine details of the object. Gauss-Newton optimisation is not robust to initialisations that are far from the optimal solution. In this paper, we propose the first, to the best of our knowledge, attempt to combine the best of these two worlds under a unified model and report state-of-the-art performance on the most recent facial benchmark challenge.

In this paper we present a novel generative deformable model motivated by Pictorial Structures (PS) and Active Appearance Models (AAMs) for object alignment in-the-wild. Inspired by the tree structure used in PS, the proposed Active Pictorial Structures (APS)1model the appearance of the object using multiple graph-based pairwise normal distributions (Gaussian Markov Random Field) between the patches extracted from the regions around adjacent landmarks. We show that this formulation is more accurate than using a single multivariate distribution (Principal Component Analysis) as commonly done in the literature. APS employ a weighted inverse compositional Gauss-Newton optimization with fixed Jacobian and Hessian that achieves close to real-time performance and state-of-the-art results. Finally, APS have a spring-like graph-based deformation prior term that makes them robust to bad initializations. We present extensive experiments on the task of face alignment, showing that APS outperform current state-of-the-art methods. To the best of our knowledge, the proposed method is the first weighted inverse compositional technique that proves to be so accurate and efficient at the same time.

Lucas-Kanade and active appearance models are among the most commonly used methods for image alignment and facial fitting, respectively. They both utilize nonlinear gradient descent, which is usually applied on intensity values. In this paper, we propose the employment of highly descriptive, densely sampled image features for both problems. We show that the strategy of warping the multichannel dense feature image at each iteration is more beneficial than extracting features after warping the intensity image at each iteration. Motivated by this observation, we demonstrate robust and accurate alignment and fitting performance using a variety of powerful feature descriptors. Especially with the employment of histograms of oriented gradient and scale-invariant feature transform features, our method significantly outperforms the current state-of-the-art results on in-the-wild databases.

Deformable objects are everywhere. Faces, cars, bicycles, chairs etc. Recently, there has been a wealth of research on training deformable models for object detection, part localization and recognition using annotated data. In order to train deformable models with good generalization ability, a large amount of carefully annotated data is required, which is a highly time consuming and costly task. We propose the first - to the best of our knowledge - method for automatic construction of deformable models using images captured in totally unconstrained conditions, recently referred to as "in-the-wild". The only requirements of the method are a crude bounding box object detector and a-priori knowledge of the object's shape (e.g. a point distribution model). The object detector can be as simple as the Viola-Jones algorithm (e.g. even the cheapest digital camera features a robust face detector). The 2D shape model can be created by using only a few shape examples with deformations. In our experiments on facial deformable models, we show that the proposed automatically built model not only performs well, but also outperforms discriminative models trained on carefully annotated data. To the best of our knowledge, this is the first time it is shown that an automatically constructed model can perform as well as methods trained directly on annotated data.

We propose the combination of dense Histogram of Oriented Gradients (HOG) features with Active Appearance Models (AAMs). We employ the efficient Inverse Compositional optimization technique and show results for the task of face fitting. By taking advantage of the descriptive characteristics of HOG features, we build robust and accurate AAMs that generalize well to unseen faces with illumination, identity, pose and occlusion variations. Our experiments on challenging in-the-wild databases show that HOG AAMs significantly outperfrom current state-of-the-art results of discriminative methods trained on larger databases.

The Menpo Project, hosted at http://www.menpo.io, is a BSD-licensed software platform providing a complete and comprehensive solution for annotating, building, fitting and evaluating deformable visual models from image data. Menpo is a powerful and flexible cross-platform framework written in Python that works on Linux, OS X and Windows. Menpo has been designed to allow for easy adaptation of Lucas-Kanade (LK) parametric image alignment techniques, and goes a step further in providing all the necessary tools for building and fitting state-of-the-art deformable models such as Active Appearance Models (AAMs), Constrained Local Models (CLMs) and regression-based methods (such as the Supervised Descent Method (SDM)). These methods are extensively used for facial point localisation although they can be applied to many other deformable objects. Menpo makes it easy to understand and evaluate these complex algorithms, providing tools for visualisation, analysis, and performance assessment. A key challenge in building deformable models is data annotation; Menpo expedites this process by providing a simple web-based annotation tool hosted at http://www.landmarker.io. The Menpo Project is thoroughly documented and provides extensive examples for all of its features. We believe the project is ideal for researchers, practitioners and students alike.

We propose an Unsupervised method for Extreme States Classification (UnESC) on feature spaces of facial cues of interest. The method is built upon Active Appearance Models (AAM) face tracking and on feature extraction of Global and Local AAMs. UnESC is applied primarily on facial pose, but is shown to be extendable for the case of local models on the eyes and mouth. Given the importance of facial events in Sign Languages we apply the UnESC on videos from two sign language corpora, both American (ASL) and Greek (GSL) yielding promising qualitative and quantitative results. Apart from the detection of extreme facial states, the proposed Un-ESC also has impact for SL corpora lacking any facial annotations.