Current statistical channel models for Terahertz (THz) wireless communication primarily concentrate on the sub-THz band, mostly with$\alpha-\mu$and Gaussian mixture fading distributions for short-term fading and deterministic modeling for atmospheric absorption. In this paper, we develop a generalized statistical model for signal propagation at THz frequencies considering random path-loss employing Gamma distribution for the molecular absorption coefficient, short-term fading charac-terized by the$\alpha-\eta-\kappa-\mu$distribution, antenna misalignment errors, and transceiver hardware impairments. The proposed model can handle various propagation scenarios, including indoor and outdoor environments, backhauVfronthaul situations, and complex urban settings. Using Fox's H-functions, we present the probability density function (PDF) and cumulative distribution function (CDF) that capture the combined statistical effects of channel impairments. We analyze the outage probability of a THz link to demonstrate the analytical tractability of the proposed generalized model. We present computer simulations to demonstrate the efficacy of the proposed model for performance assessment with the statistical effect of atmospheric absorption.

Perception systems for outdoor robotics have to deal with varying environmental conditions. Variations in illumination in particular, are currently the biggest challenge for vision-based perception. In this paper we present an approach for radiometric characterization of multispectral cameras. To enable spatio-temporal mapping we also present a procedure for in-situ illumination estimation, resulting in radiometric calibration of the collected images. In contrast to current approaches, we present a purely data driven, parameter free approach, based on maximum likelihood estimation which can be performed entirely on the field, without requiring specialised laboratory equipment. Our routine requires three simple datasets which are easily acquired using most modern multispectral cameras. We evaluate the framework with a cost-effective snapshot multispectral camera. The results show that our method enables the creation of quatitatively accurate relative reflectance images with challenging on field calibration datasets under a variety of ambient conditions.

Unmanned aerial vehicles (UAVs) and other robots in smart farming applications offer the potential to monitor farm land on a per-plant basis, which in turn can reduce the amount of herbicides and pesticides that must be applied. A central information for the farmer as well as for autonomous agriculture robots is the knowledge about the type and distribution of the weeds in the field. In this regard, UAVs offer excellent survey capabilities at low cost. In this paper, we address the problem of detecting value crops such as sugar beets as well as typical weeds using a camera installed on a light-weight UAV. We propose a system that performs vegetation detection, plant-tailored feature extraction, and classification to obtain an estimate of the distribution of crops and weeds in the field. We implemented and evaluated our system using UAVs on two farms, one in Germany and one in Switzerland and demonstrate that our approach allows for analyzing the field and classifying individual plants.

Deployment of camera and laser based motion estimation systems for controlling platforms operating at high speeds, such as cars or trains, is posing increasingly challenging precision requirements on the temporal calibration of these sensors. In this work, we demonstrate a simple, low-cost system for calibrating any combination of cameras and time of flight LIDARs with respect to the CPU clock (and therefore, also to each other). The newly proposed device is based on widely available off-the-shelf components, such as the Raspberry Pi 3, which is synchronized using the Precision Time Protocol (PTP) with respect to the CPU of the sensor carrying system. The obtained accuracy can be shown to be below 0.1 ms per measurement for LIDARs and below minimal exposure time per image for cameras. It outperforms state-of-the-art approaches also not relying on hardware synchronization by more than a factor of 10 in precision. Moreover, the entire process can be carried out at a high rate allowing the study of how offsets evolve over time. In our analysis, we demonstrate how each building block of the system contributes to this accuracy and validate the obtained results using real-world data.

Recent developments in Unmanned Aerial Vehicles (UAVs) have made them ideal tools for remotely monitoring agricultural fields. Complementary advancements in computer vision have enabled automated post-processing of images to generate dense 3D reconstructions in the form of point clouds. In this paper we present a monitoring pipeline that uses a readily available, low cost UAV and camera for quickly surveying a winter wheat field, generate a 3D point cloud from the collected imagery and present methods for automated crop height estimation from the extracted point cloud and compare our estimates with those using standardized techniques.