The latest video coding standard high-efficiency video coding (HEVC) provides 50% improvement in coding efficiency compared to H.264/AVC to meet the rising demands for video streaming, better video quality, and higher resolution. The deblocking filter (DF) and sample adaptive offset (SAO) play an important role in the HEVC encoder, and the SAO is newly adopted in HEVC. Due to the high throughput requirement in the video encoder, design challenges such as data dependence, external memory traffic, and on-chip memory area become even more critical. To solve these problems, we first propose an interlacing memory organization on the basis of quarter-LCU to resolve the data dependence between vertical and horizontal filtering of DF. The on-chip SRAM area is also reduced to about 25% on the basis of quarter-LCU scheme without throughput loss. We also propose a simplified bitrate estimation method of rate-distortion cost calculation to reduce the computational complexity in the mode decision of SAO. Our proposed hardware architecture of combined DF and SAO is designed for the HEVC intraencoder, and the proposed simplified bitrate estimation method of SAO can be applied to both intra- and intercoding. As a result, our design can support ultrahigh definition 7680 × 4320 at 40 f/s applications at merely 182 MHz working frequency. Total logic gate count is 103.3 K in 65 nm CMOS process.

Frame recompression is an efficient way to reduce the huge bandwidth of external memory for video encoder, especially for P/B frame compression. A novel algorithm, which is called mixed lossy and lossless (MLL) reference frame recompression, is proposed in this paper. The bandwidth reduction comes from two sources in our scheme, which differs from its previous designs and achieves a much higher compression ratio. First, it comes from pixel truncation. We use truncated pixels (PR) for integer motion estimation (IME) and acquire truncated residuals for factional motion estimation (FME) and motion compensation (MC). Because the pixel access of IME is much larger than FME and MC, it saves about 37.5% bandwidth under 3-b truncation. Second, embedded compression of PR helps to further reduce data. The truncated pixels in the first stage greatly help to achieve a higher compression ratio than current designs. From our experiments, 3-b truncated PR can be compressed to 15.4% of the original data size, while most current embedded compressions can only achieve around 50%. For PR compression, two methods are proposed: in-block prediction and small-value optimized variable length coding. With these experiments, the total bandwidth can be reduced to 25.5%. Our proposed MLL is hardware/software friendly and also fast IME algorithm friendly frame recompression scheme. It is more suitable to work together with the data-reuse strategy than the previous schemes, and the video quality degradation is controllable and negligible.

This brief describes a new method to implement the single-port SRAM-based transpose memory for large size discrete cosine transform (DCT)/indiscrete cosine transform (IDCT) which are used in the latest video coding standard, such as high efficiency video coding. Instead of shift-register array or multiport SRAM, only single-port SRAM is used in the proposed design. A new diagonal data mapping scheme is proposed to reduce the number of SRAM banks used to implement the transpose memory. This design can be flexibly extended to support DCT/IDCT of different transform sizes and different data throughput rates. To support larger size DCT/IDCT, only the depth of SRAM needs to be increased. To support different data throughput rate, multiple SRAM banks are well organized according to the required throughput. Row access and column access can be perfectly supported under single port SRAM. The equivalent gate count per bit (EGC) of proposed approach is less than two, which is much more efficient than the previous method. It is suitable for real-time processing of the video with the resolution up to 1080P HD or even higher.

As the next generation standard of video coding, the High Efficiency Video Coding (HEVC) aims to provide significantly improved compression performance in comparison with all existing video coding standards. We propose a four-stage pipeline hardware architecture on a quarter-LCU basis of deblocking filter in HEVC. Coupled with the novel filter order, a memory interlacing technique is adopted to increase the throughput, which can access the data in the process of both vertical and horizontal filtering efficiently. As a result, our design can support 4K×2K (4096×2048) at 30 fps applications with merely 28 MHz working frequency.