Automating small-scale experiments in materials science presents challenges due to the heterogeneous nature of experimental setups. This study introduces the SCU-Hand (Soft Conical Universal Robot Hand), a novel end-effector designed to automate the task of scooping powdered samples from various container sizes using a robotic arm. The SCU-Hand employs a flexible, conical structure that adapts to different container geometries through deformation, maintaining consistent contact without complex force sensing or machine learning-based control methods. Its reconfigurable mechanism allows for size adjustment, enabling efficient scooping from diverse container types. By combining soft robotics principles with a sheet-morphing design, our end-effector achieves high flexibility while retaining the necessary stiffness for effective powder manipulation. We detail the design principles, fabrication process, and experimental validation of the SCU-Hand. Experimental validation showed that the scooping capacity is about 20% higher than that of a commercial tool, with a scooping performance of more than 95% for containers of sizes between 67 mm to 110 mm. This research contributes to laboratory automation by offering a cost-effective, easily implementable solution for automating tasks such as materials synthesis and characterization processes.

Robotic manipulators capable of regulating both compliance and stiffness offer enhanced operational safety and versatility. Here, we introduce Worm Gear-based Adaptive Variable Elasticity (WAVE), a variable stiffness actuator (VSA) that integrates a non-backdrivable worm gear. By decoupling the driving motor from external forces using this gear, WAVE enables precise force transmission to the joint, while absorbing positional discrepancies through compliance. WAVE is protected from excessive loads by converting impact forces into elastic energy stored in a spring. In addition, the actuator achieves continuous joint stiffness modulation by changing the spring’s precompression length. We demonstrate these capabilities, experimentally validate the proposed stiffness model, show that motor loads approach zero at rest–even under external loading–and present applications using a manipulator with WAVE. This outcome showcases the successful decoupling of external forces. The protective attributes of this actuator allow for extended operation in contact-intensive tasks, and for robust robotic applications in challenging environments.

Cable-driven serpentine manipulators hold great potential in unstructured environments, offering obstacle avoidance, multi-directional force application, and a lightweight design. By placing all motors and sensors at the base and employing plastic links, we can further reduce the arm’s weight. To demonstrate this concept, we developed a 9-degree-of-freedom cable-driven serpentine manipulator with an arm length of 545 mm and a total mass of only 308 g. However, this design introduces flexibility-induced variations, such as cable slack, elongation, and link deformation. These variations result in discrepancies between analytical predictions and actual link positions, making pose estimation more challenging. To address this challenge, we propose a physical reservoir computing based pose estimation method that exploits the manipulator’s intrinsic nonlinear dynamics as a high-dimensional reservoir. Experimental results show a mean pose error of 4.3 mm using our method, compared to 4.4 mm with a baseline long short-term memory network and 39.5 mm with an analytical approach. This work provides a new direction for control and perception strategies in lightweight cable-driven serpentine manipulators leveraging their intrinsic dynamics.

Incorporating robust authentication and authorization mechanisms is important to reduce the risk of credential information leakage in an application such as Internet shopping when a smart device is shared by multiple people. We developed a system that allows smart device administrators to customize the application by registering access control conditions expressed as logical expressions into our system. However, the administrator need logical thinking abilities when creating logical expressions, which is not easy to describe the logical expressions to ensure they work as intended for the specific processing flow because they are not programmers. This paper proposes a tutoring system that helps to express logically using a chatbot, which contributes to enhancement and flexibility for smart device security.

Model predictive instantaneous-current control (MPIC), which was proposed in our earlier works, enables us to achieve better instantaneous current control using mathematical models of an inverter and permanent magnet synchronous motors (PMSM). However, the dead-time to avoid the short breakdown in the inverter is the main reason in the modeling error. If the modeling error is not ignorable, it is not possible to predict the current evolution using the model. Thus, in this paper, we analyze the influence of the dead-time in MPIC and propose a compensation technique for the dead-time so that the error of the predicted current is reduced. The effectiveness of the proposed method is verified through simulation and experiments.