Cloud robotics enables robots to offload computationally intensive tasks to cloud servers for performance, cost, and ease of management. However, the network and cloud computing infrastructure are not designed for reliable timing guarantees, due to fluctuating Quality-of-Service (QoS). In this work, we formulate an impossibility triangle theorem for: Latency reliability, Singleton server, and Commodity hardware. The LSC theorem suggests that providing replicated servers with uncorrelated failures can exponentially reduce the probability of missing a deadline. We present FogROS2-Probabilistic Latency Reliability (PLR) that uses multiple independent network interfaces to send requests to replicated cloud servers and uses the first response back. We design routing mechanisms to discover, connect, and route through non-default network interfaces on robots. FogROS2-PLR optimizes the selection of interfaces to servers to minimize the probability of missing a deadline. We conduct a cloud-connected driving experiment with two 5 G service providers, demonstrating FogROS2-PLR effectively provides smooth service quality even if one of the service providers experiences low coverage and base station handover. We use 99 Percentile (P99) latency to evaluate anomalous long-tail latency behavior. In one experiment, FogROS2-PLR improves P99 latency by up to 3.7 x compared to using one service provider. We deploy FogROS2-PLR on a physical Stretch 3 robot performing an indoor human-tracking task. Even in a fully covered$\text{Wi}-\text{Fi}$and 5 G environment, FogROS2-PLR improves the responsiveness of the robot reducing mean latency by 36% and P99 latency by 33%. Code and supplementary can be found on website11https://github.com/data-capsule/rt-fogros2.

Current Multi-Modal Large language Models (MMLMs) primarily rely on instance-level feature statistics for cross-modal alignment. However, they commonly suffer three inherent limitations including vulnerability to outlier perturbations, neglect of inter-feature covariance structures, and local optimum trapping. These limitations stem from a critical oversight—existing approaches disregard the global statistical structure of multi-modal data, treating cross-modal alignment as isolated feature-level alignment rather than systematic distribution-level alignment. To address these issues, this paper proposes Layer-wise Covariance Alignment (LCA), which first leverages distribution-level alignment for cross-modal alignment. The effectiveness of LCA is validated through the use of parameter-efficient Low-Rank Adaptation (LoRA) on CLIP architectures. Experimental validation across eight benchmarks demonstrates state-of-the-art performance, confirming the critical role of distribution-level alignment in overcoming sample-level optimization constraints for cross-modal learning.

In Cloud Robotics, long system latency due to varying network conditions can cause instability and collisions. However, this can be minimized in the almost univeral case where there are multiple sources available for cloud servers. By extending anycast routing, we introduce FogROS2-Latency-Sensitive, a Fog Robotics framework that offers secure, location-independent connections between robots and latency-sensitive cloud-based servers. FogROS2-LS offloads conventional on-board state estimators and feedback controllers to Cloud and Edge compute hardware without modifying existing applications in ROS2. In the presence of multiple identical services, FogROS2-LS dynamically identifies and transitions to the optimal service deployment that meets latency requirements, thereby empowering robots with limited on-board computing capacity to safely and efficiently navigate dynamic, human-dense environments. We evaluate FogROS2-LS with two latency sensitive case studies: (1) Collision Avoidance: a robot arm guided by visual feedback from consistent distance estimation and collision checking on Cloud and Edge. FogROS2-LS reduces collision failures by up to 8.5x by selecting the best available server, and (2) Target Tracking: FogROS2-LS enables robust and continuous target following and can recover from network failures. Videos and code are available on the website https://sites.google.com/view/fogros2-ls.

Inventory monitoring in homes, factories, and retail stores relies on maintaining data despite objects being swapped, added, removed, or moved. We introduce Lifelong LERF, a method that allows a mobile robot with minimal compute to jointly optimize a dense language and geometric representation of its surroundings. Lifelong LERF maintains this representation over time by detecting semantic changes and selectively updating these regions of the environment, avoiding the need to exhaustively remap. Human users can query inventory by providing natural language queries and receiving a 3D heatmap of potential object locations. To manage the computational load, we use Fog-ROS2, a cloud robotics platform, to offload resource-intensive tasks. Lifelong LERF obtains poses from a monocular RGBD SLAM backend, and uses these poses to progressively optimize a Language Embedded Radiance Field (LERF) for semantic monitoring. Experiments with 3-5 objects arranged on a tabletop and a Turtlebot with a RealSense camera suggest that Lifelong LERF can persistently adapt to changes in objects with up to 91% accuracy.

Cloud robotics enables robots to offload complex computational tasks to cloud servers for performance and ease of management. However, cloud compute can be costly, cloud services can suffer occasional downtime, and connectivity between the robot and cloud can be prone to variations in network Quality-of-Service (QoS). We present FogROS2-FT (Fault Tolerant) to mitigate these issues by introducing a multi-cloud extension that automatically replicates independent stateless robotic services, routes requests to these replicas, and directs the first response back. With replication, robots can still benefit from cloud computations even when a cloud service provider is down or there is low QoS. Additionally, many cloud computing providers offer low-cost "spot" computing instances that may shutdown unpredictably. Normally, these low-cost instances would be inappropriate for cloud robotics, but the fault tolerance nature of FogROS2-FT allows them to be used reliably. We demonstrate FogROS2-FT fault tolerance capabilities in 3 cloud-robotics scenarios in simulation (visual object detection, semantic segmentation, motion planning) and 1 physical robot experiment (scan-pick-and-place). Running on the same hardware specification, FogROS2-FT achieves motion planning with up to 2.2x cost reduction and up to a 5.53x reduction on 99 Percentile (P99) long-tail latency. FogROS2-FT reduces the P99 long-tail latency of object detection and semantic segmentation by 2.0x and 2.1x, respectively, under network slowdown and resource contention. Videos and code are available at https://sites.google.com/view/fogros2-ft.

Cloud Robotics is a paradigm where multiple robots are connected to cloud services via Internet to access “unlimited” computation power, at the cost of network communication. However, due to limitations such as network latency and variability, it is difficult to control dynamic, human compliant service robots directly from the cloud. In this work, we combine cloud robotics with an agile edge device to build a Fog Robotic system by leveraging an asynchronous protocol with a “heartbeat” signal. We use the system to enable robust teleoperation of a dynamic self-balancing robot from the cloud. We use the system to pick up boxes from static locations, a task commonly performed in warehouse logistics. To make cloud teleoperation more intuitive and efficient, we program a cloud-based image based visual servoing (IBVS) module to automatically assist the cloud teleoperator during the object pickups. Visual feedbacks, including apriltag recognition and tracking, are performed in the cloud to emulate a Fog Robotic object recognition system for IBVS. We demonstrate the feasibility of a dynamic real-time automation system using this cloud-edge hybrid design, which opens up possibilities of deploying dynamic robotic control with deep-learning recognition systems in Fog Robotics. Finally, we show that Fog Robotics enables the self-balancing service robot to pick up a box automatically from a person under unstructured environments.

In support of Cloud Robotics, Robotics and Automation as a Service (RAaaS) frameworks have the potential to reduce the complexity of software development, simplify software installation and maintenance, and facilitate data sharing for machine learning. In this proof-of-concept paper, we describe Berkeley Robotics and Automation as a Service (Brass), a RAaaS prototype that allows robots to access a remote server that hosts a robust grasp-planning system (Dex-Net 1.0) that maintains data on hundreds of candidate grasps on thousands of 3D object meshes and uses perturbation sampling to estimate and update a stochastic robustness metric for each grasp. Results suggest that such a system can increase grasp reliability over naive locally-computed grasping strategies with network latencies of 30 and 200 msec for servers 500 and 6000 miles away, respectively. We also study how the system can use execution reports from robots in the field to update grasp recommendations over time.

Recommender systems provide personalized advice for online customers based on their own preferences, while reputation systems generate a community advice on the quality of items on the Web. Both systems employ users' ratings to generate their output. In this paper, we aim to combine reputation models with recommender systems to enhance the accuracy of recommendations. Our proposed methods make two contributions. First of all, we propose two methods for merging two ranked item lists which are generated based on recommendation scores and reputation scores, respectively. In addition, a novel personalized reputation method is designed in order to generate item reputations based upon users' interests. The proposed merging methods can be applicable to any recommendation methods and reputation methods, i.e., they are independent from generating recommendation scores and reputation scores. The experiments we conducted showed that the proposed methods could enhance the accuracy of existing recommender systems.

In recent years, the Web 2.0 has provided considerable facilities for people to create, share and exchange information and ideas. Upon this, the user generated content, such as reviews, has exploded. Such data provide a rich source to exploit in order to identify the information associated with specific reviewed items. Opinion mining has been widely used to identify the significant features of items (e.g., cameras) based upon user reviews. Feature extraction is the most critical step to identify useful information from texts. Most existing approaches only find individual features about a product without revealing the structural relationships between the features which usually exist. In this paper, we propose an approach to extract features and feature relationships, represented as a tree structure called feature taxonomy, based on frequent patterns and associations between patterns derived from user reviews. The generated feature taxonomy profiles the product at multiple levels and provides more detailed information about the product. Our experiment results based on some popularly used review datasets show that our proposed approach is able to capture the product features and relations effectively.