Ensuring robust robotic navigation in dynamic environments is a key challenge, as traditional testing methods often struggle to cover the full spectrum of operational requirements. This paper presents the industrial adoption of Surrealist, a simulation-based test generation framework originally for UAVs, now applied to the ANYmal quadrupedal robot for industrial inspection. Our method uses a search-based algorithm to automatically generate challenging obstacle avoidance scenarios, uncovering failures often missed by manual testing. In a pilot phase, generated test suites revealed critical weaknesses in one experimental algorithm (40.3% success rate) and served as an effective benchmark to prove the superior robustness of another (71.2% success rate). The framework was then integrated into the ANYbotics workflow for a six-month industrial evaluation, where it was used to test five proprietary algorithms. A formal survey confirmed its value, showing it enhances the development process, uncovers critical failures, provides objective benchmarks, and strengthens the overall verification pipeline.

In this work we present an adaptive control approach for pivoting, which is an in-hand manipulation maneuver that consists of rotating a grasped object to a desired orientation relative to the robot's hand. We perform pivoting by means of gravity, allowing the object to rotate between the fingers of a one degree of freedom gripper and controlling the gripping force to ensure that the object follows a reference trajectory and arrives at the desired angular position. We use a visual pose estimation system to track the pose of the object and force measurements from tactile sensors to control the gripping force. The adaptive controller employs an update law that accommodates for errors in the friction coefficient, which is one of the most common sources of uncertainty in manipulation. Our experiments confirm that the proposed adaptive controller successfully pivots a grasped object in the presence of uncertainty in the object's friction parameters.

We study the problem of robot interaction with mechanisms that afford one degree of freedom motion, e.g., doors and drawers. We propose a methodology for simultaneous compliant interaction and estimation of constraints imposed by the joint. Our method requires no prior knowledge of the mechanisms' kinematics, including the type of joint, prismatic or revolute. The method consists of a velocity controller that relies on force/torque measurements and estimation of the motion direction, the distance, and the orientation of the rotational axis. It is suitable for velocity-controlled manipulators with force/torque sensor capabilities at the end-effector. Forces and torques are regulated within given constraints, while the velocity controller ensures that the end-effector of the robot moves with a task-related desired velocity. We give proof that the estimates converge to the true values under valid assumptions on the grasp, and error bounds for setups with inaccuracies in control, measurements, or modeling. The method is evaluated in different scenarios involving opening a representative set of door and drawer mechanisms found in household environments.

In this work we propose a sliding mode controller for in-hand manipulation that repositions a tool in the robot's hand by using gravity and controlling the slippage of the tool. In our approach, the robot holds the tool with a pinch grasp and we model the system as a link attached to the gripper via a passive revolute joint with friction, i.e., the grasp only affords rotational motions of the tool around a given axis of rotation. The robot controls the slippage by varying the opening between the fingers in order to allow the tool to move to the desired angular position following a reference trajectory. We show experimentally how the proposed controller achieves convergence to the desired tool orientation under variations of the tool's inertial parameters.

One of the big challenges for robots working outside of traditional industrial settings is the ability to robustly and flexibly grasp and manipulate tools for various tasks. When a tool is interacting with another object during task execution, several problems arise: a tool can be partially or completely occluded from the robot's view, it can slip or shift in the robot's hand - thus, the robot may lose the information about the exact position of the tool in the hand. Thus, there is a need for online calibration and/or recalibration of the tool. In this paper, we present a model-free online tool-tip calibration method that uses force/torque measurements and an adaptive estimation scheme to estimate the point of contact between a tool and the environment. An adaptive force control component guarantees that interaction forces are limited even before the contact point estimate has converged. We also show how to simultaneously estimate the location and normal direction of the surface being touched by the tool-tip as the contact point is estimated. The stability of the the overall scheme and the convergence of the estimated parameters are theoretically proven and the performance is evaluated in experiments on a real robot.

This paper addresses the problem of robot interaction with objects attached to the environment through joints such as doors or drawers. We propose a methodology that requires no prior knowledge of the objects' kinematics, including the type of joint - either prismatic or revolute. The method consists of a velocity controller which relies on force/torque measurements and estimation of the motion direction, rotational axis and the distance from the center of rotation. The method is suitable for any velocity controlled manipulator with a force/torque sensor at the end-effector. The force/torque control regulates the applied forces and torques within given constraints, while the velocity controller ensures that the end-effector moves with a task-related desired tangential velocity. The paper also provides a proof that the estimates converge to the actual values. The method is evaluated in different scenarios typically met in a household environment.

This paper introduces a method for estimating the constraints imposed by a human agent on a jointly manipulated object. These estimates can be used to infer knowledge of where the human is grasping an object, enabling the robot to plan trajectories for manipulating the object while subject to the constraints. We describe the method in detail, motivate its validity theoretically, and demonstrate its use in co-manipulation tasks with a real robot.