Mobile robots functioning in human environments should behave with a secure and socially-compliant manner. Although many studies have revealed the effectiveness of Deep Reinforcement Learning (DRL) in robot navigation, most of them can only handle the presence of human as independent individuals. Failing to consider groups may lead to the robot getting stuck or behaving rudely, and omitting to separately handle obstacles from pedestrians will cause low efficiency. In this work, we present a novel all-aware neural network that utilizes DRL to process groups, obstacles, and individuals simultaneously. The proposed solution employs a new Group–Robot Interaction (GRI) subnetwork to encode the mutual effects between groups and the robot, and a modified Obstacle–Robot Unilateral interaction (ORU) subnetwork is presented to avoid obstacle collisions caused by sensing noises or motion uncertainties. In addition, the influences of a pedestrian, obstacle, and group on other pedestrians or groups, that indirectly affect the robot, are also integrated into the Human–Robot Interaction (HRI) subnetwork or GRI subnetwork respectively by using map tensors. Finally, the GRI, ORU, and HRI subnetworks are aggregated into a planning subnetwork to train and derive an all-aware robot navigation policy based on DRL. Evaluation results in both real-world and simulation experiments show that the proposed approach outperforms the current cutting-edge methods.

Proximity and distance estimation sensors are broadly used in robotic hands to enhance the quality of grasping during grasp planning, grasp correction and in-hand manipulation. This paper presents a fiber optical proximity sensor that is integrated with a tactile sensing fingertip of a robotic hand of a mobile robot. The distance estimation of proximity sensors are typically influenced by the reflective properties of an object, such as color or surface roughness. With the approach proposed in this paper, the accuracy of the proximity sensor is enhanced using the information collected by the vision system of the robot. A camera is employed to obtain RGB values of the object to be grasped. Further on, the data obtained from the camera is used to obtain the correct calibration for the proximity sensor. Based on the experimental evidence, it is shown that our approach can be effectively used to reduce the distance estimation error.

This paper presents an innovative hand-held device able to compute stiffness when interacting with a soft object. The device is composed of four linear indenters and a USB camera. The stiffness is computed in real-time, tracking the movements of spherical features in the image of the camera. Those movements relate to the movements of the four indenters when interacting with a soft surface. Since the indenters are connected to springs with different spring constants, the displacement of the indenters varies when interacting with a soft object. The proposed multi-indenting device allows measuring the object's stiffness as well as the pan and tilt angles between the sensor and the surface of the soft object. Tests were performed to evaluate the accuracy of the proposed palpation mechanism against commercial springs of known stiffness. Results show that the accuracy and sensitivity of the proposed device increases with the softness of the examined object. Preliminary tests with silicon show the ability of the sensing mechanism to characterize phantom soft tissue for small indentation. It is noted that the results are not affected by the orientation of the device when probing the surface. The proposed sensing device can be used in different applications, such as external palpation for diagnosis or, if miniaturized, embedded on an endoscopic camera and used in Minimally Invasive Surgery (MIS).

This paper presents an innovative approach of utilising visual feedback to determine physical interaction forces with soft tissue during Minimally Invasive Surgery (MIS). This novel force sensing device is composed of a linear retractable mechanism and a spherical visual feature. The sensor mechanism can be adapted to endoscopic cameras used in MIS. As the distance between the camera and feature varies due to the sliding joint, interaction forces with anatomical surfaces can be computed based on the visual appearance of the feature in the image. Hence, this device allows the measurement of forces without introducing new stand-alone sensors. A mathematical model was derived based on validation data tests and preliminary experiments were conducted to verify the model's accuracy. Experimental results confirm the effectiveness of our vision based approach.

Current surgical tele-manipulators do not provide explicit haptic feedback during soft tissue palpation. Haptic information could improve the clinical outcomes significantly and help to detect hard inclusions within soft-tissue organs indicating potential abnormalities. However, system instability is often caught by direct force feedback. In this paper, a new approach to intra-operative tumor localization is introduced. A virtual-environment tissue model is created based on the reconstructed surface of a soft-tissue organ using a Kinect depth sensor and the organ's stiffness distribution acquired during rolling indentation measurements. Palpation applied to this tissue model is haptically fed back to the user. In contrast to previous work, our method avoids the control issues inherent to systems that provide direct force feedback. We demonstrate the feasibility of this method by evaluating the performance of our tumor localization method on a soft tissue phantom containing buried stiff nodules. Results show that participants can identify the embedded tumors; the proposed method performed nearly as well as manual palpation.

This paper introduces an optical based three axis force sensor which can be integrated with the robot arm of the EU project STIFF-FLOP (STIFFness controllable Flexible and Learnable Manipulator for Surgical Operations) in order to measure applied external forces. The structure of the STIFF-FLOP arm is free of metal components and electric circuits and, hence, is inherently safe near patients during surgical operations. In addition, this feature makes the performance of this sensing system immune against strong magnetic fields inside magnetic resonance (MR) imaging scanners. The hollow structure of the sensor allows the implementation of distributed actuation and sensing along the body of the manipulator. In this paper, we describe the design and calibration procedure of the proposed three axis optics-based force sensor. The experimental results confirm the effectiveness of our optical sensing approach and its applicability to determine the force and momentum components during the physical interaction of the robot arm with its environment.

Robotic manipulators for Robot-assisted Minimally Invasive Surgery (RMIS) pass through small incisions into the patient's body and interact with soft internal organs. The performance of traditional robotic manipulators such as the da Vinci Robotic System is limited due to insufficient flexibility of the manipulator and lack of haptic feedback. Modern surgical manipulators have taken inspiration from biology e.g. snakes or the octopus. In order for such soft and flexible arms to reconfigure itself and to control its pose with respect to organs as well as to provide haptic feedback to the surgeon, tactile sensors can be integrated with the robot's flexible structure. The work presented here takes inspiration from another area of biology: cucumber tendrils have shown to be ideal tactile sensors for the plant that they are associated with providing useful environmental information during the plant's growth. Incorporating the sensing principles of cucumber tendrils, we have created miniature sensing elements that can be distributed across the surface of soft manipulators to form a sensor network capable of acquire tactile information. Each sensing element is a retractable hemispherical tactile measuring applied pressure. The actual sensing principle chosen for each tactile makes use of optic fibres that transfer light signals modulated by the applied pressure from the sensing element to the proximal end of the robot arm. In this paper, we describe the design and structure of the sensor system, the results of an analysis using Finite Element Modeling in ABAQUS as well as sensor calibration and experimental results. Due to the simple structure of the proposed tactile sensor element, it is miniaturisable and suitable for MIS. An important contribution of this work is that the developed sensor system can be ”loosely” integrated with a soft arm effectively operating independently of the arm and without affecting the arm's motion during bending or elongation.

We present a control-based approach for visual navigation of humanoid robots in office-like environments. In particular, the objective of the humanoid is to follow a maze of corridors, walking as close as possible to their center to maximize motion safety. Our control algorithm is inspired by a technique originally designed for unicycle robots and extended here to cope with the presence of turns and junctions. The feedback signals computed for the unicycle are transformed to inputs that are suited for the locomotion system of the humanoid, producing a natural, human-like behavior. Experimental results for the humanoid robot NAO are presented to show the validity of the approach, and in particular the successful extension of the controller to turns and junctions.