This paper is devoted to a system for aerial manipulation, composed of a helicopter and an industrial manipulator. The usage of an industrial manipulator is motivated by practical applications which were identified in different cooperation projects with the industry. We address the coupling between manipulator and helicopter and show that even in case when we have an ideal controller for manipulator and a highperformance controller for helicopter, an unbounded energy flow can be generated by internal forces between helicopter and manipulator if both controllers are used independently. To solve this problem we propose a new kinematical coupling for control by introducing an additional manipulation DoF realized by helicopter rotation around its yaw axis. The new experimental setup and required modifications in the manipulator controller for this purpose are described. Further, we propose dynamical coupling which is implemented by modification of the helicopter controller feeding the interaction force/torque, measured between manipulator base and fuselage, directly to the actuators of the rotor blades. At the end, we present experimental results for aerial manipulation and their analysis.

In this paper we describe a system for aerial manipulation composed of a helicopter platform and a fully actuated seven Degree of Freedom (DoF) redundant industrial robotic arm. We present the first analysis of such kind of systems and show that the dynamic coupling between helicopter and arm can generate diverging oscillations with very slow frequency which we called phase circles. Based on the presented analysis, we propose a control approach for the whole system. The partial decoupling between helicopter and arm - which eliminates the phase circles - is achieved by means of special movement of robotic arm utilizing its redundant DoF. For the underlying arm control a specially designed impedance controller was proposed. In different flight experiments we showcase that the proposed kind of system type might be used in the future for practically relevant tasks. In an integrated experiment we demonstrate a basic manipulation task - impedance based grasping of an object from the environment underlaying a visual object tracking control loop.