Recent advances in distributed intelligence have driven impressive progress across a diverse range of applications, from industrial automation to autonomous transportation. Nevertheless, deploying distributed learning services over wireless networks poses numerous challenges. These arise from inherent uncertainties in wireless environments (e.g., random channel fluctuations), limited resources (e.g., bandwidth and transmit power), and the presence of coexisting services on the network. In this paper, we investigate a mixed service scenario wherein high-priority ultra-reliable low latency communication (URLLC) and low-priority distributed learning services run concurrently over a network. Utilizing device selection, we aim to minimize the convergence time of distributed learning while simultaneously fulfilling the requirements of the URLLC service. We formulate this problem as a Markov decision process and address it via BSAC-CoEx, a framework based on the branching soft actor-critic (BSAC) algorithm that determines each device’s participation decision through distinct branches in the actor’s neural network. We evaluate our solution with a realistic simulator that is compliant with 3GPP standards for factory automation use cases. Our simulation results confirm that our solution can significantly decrease the training delays of the distributed learning service while keeping the URLLC availability above its required threshold and close to the scenario where URLLC solely consumes all wireless resources.

This paper investigates efficient distributed training of a Federated Learning (FL) model over a wireless network of wireless devices. The communication iterations of the distributed training algorithm may be substantially deteriorated or even blocked by the effects of the devices’ background traffic, packet losses, congestion, or latency. We abstract the communication-computation impacts as an ‘iteration cost’ and propose a cost-aware causal FL algorithm (FedCau) to tackle this problem. We propose an iteration-termination method that trade-offs the training performance and networking costs. We apply our approach when workers use the slotted-ALOHA, carrier-sense multiple access with collision avoidance (CSMA/CA), and orthogonal frequency-division multiple access (OFDMA) protocols. We show that, given a total cost budget, the training performance degrades as either the background communication traffic or the dimension of the training problem increases. Our results demonstrate the importance of proactively designing optimal cost-efficient stopping criteria to avoid unnecessary communication-computation costs to achieve a marginal FL training improvement. We validate our method by training and testing FL over the MNIST and CIFAR-10 dataset. Finally, we apply our approach to existing communication efficient FL methods from the literature, achieving further efficiency. We conclude that cost-efficient stopping criteria are essential for the success of practical FL over wireless networks.

Millimeter-wave and terahertz systems rely on beam-forming/combining codebooks to determine the best beam directions during the initial access and data transmission. Existing approaches suffer from large codebook sizes and high beam searching overhead in the presence of mobile devices. To address this issue, we utilize the similarity of the channel in adjacent locations to divide the user trajectory into a set of separate regions and maintain a set of candidate beams for each region in a database. Due to the tradeoff between the number of regions and the signalling overhead, i.e., the greater number of regions results in a higher signal-to-noise ratio (SNR) but also a larger signalling overhead for the database, we propose an optimization framework to find the minimum number of regions based on the trajectory of a mobile device. Using a ray tracing tool, we demonstrate that the proposed method provides high SNR while being more robust to the location information accuracy in comparison to the lookup table baseline and fixed size region baseline.

Ultra-reliable low latency communications (URLLC) service is envisioned to enable use cases with strict reliability and latency requirements in 5G. One approach for enabling URLLC services is to leverage Reinforcement Learning (RL) to efficiently allocate wireless resources. However, with conventional RL methods, the decision variables (though being deployed at various network layers) are typically optimized in the same control loop, leading to significant practical limitations on the control loop’s delay as well as excessive signaling and energy consumption. In this paper, we propose a multi-agent Hierarchical RL (HRL) framework that enables the implementation of multi-level policies with different control loop timescales. Agents with faster control loops are deployed closer to the base station, while the ones with slower control loops are at the edge or closer to the core network providing high-level guidelines for low-level actions. On a use case from the prior art, with our HRL framework, we optimized the maximum number of retransmissions and transmission power of industrial devices. Our extensive simulation results on the factory automation scenario show that the HRL framework achieves better performance as the baseline single-agent RL method, with significantly less overhead of signal transmissions and delay compared to the one-agent RL methods.

In this paper, we develop an algorithm for joint handover and beam tracking in millimeter-wave (mmWave) networks. The aim is to provide a reliable connection in terms of the achieved throughput along the trajectory of the mobile user while preventing frequent handovers. We model the association problem as an optimization problem and propose a reinforcement learning-based solution. Our approach learns whether and when beam tracking and handover should be performed and chooses the target base stations. In the case of beam tracking, we propose a tracking algorithm based on measuring a small spatial neighbourhood of the optimal beams in the previous time slot. Simulation results in an outdoor environment show the superior performance of our proposed solution in achievable throughput and the number of handovers needed in comparison to a multi-connectivity baseline and a learning-based handover baseline.

Communication systems supporting cyber-physical production applications should satisfy stringent delay and reliability requirements. Diversity techniques and power control are the main approaches to reduce latency and enhance the reliability of wireless communications at the expense of redundant transmissions and excessive resource usage. Focusing on the application layer reliability key performance indicators (KPIs), we design a deep reinforcement learning orchestrator for power control and hybrid automatic repeat request retransmissions to optimize these KPIs. Furthermore, to address the scalability issue that emerges in the per-device orchestration problem, we develop a new branching soft actor-critic framework in which a separate branch represents the action space of each industrial device. Our orchestrator enables near real-time control and can be implemented in the edge cloud. We test our solution with a 3GPP-compliant and realistic simulator for factory automation scenarios. Compared to the state-of-the-art, our solution offers significant scalability gains in terms of computational time and memory requirements. Our extensive experiments show significant improvements in our target KPIs, over the state-of-the-art, especially for 5th percentile user availability. To achieve these targets, our framework requires substantially less total energy or spectrum, thanks to our scalable RL solution.

Distributed artificial intelligence (AI) has recently accomplished tremendous breakthroughs in various communication services, ranging from fault-tolerant factory automation to smart cities. When distributed learning is run over a set of wireless connected devices, random channel fluctuations, and the incumbent services simultaneously running on the same network affect the performance of distributed learning. In this paper, we investigate the interplay between distributed AI workflow and ultra-reliable low latency communication (URLLC) services running concurrently over a network. Using 3GPP compliant simulations in a factory automation use case, we show the impact of various distributed AI settings (e.g., model size and the number of participating devices) on the convergence time of distributed AI and the application layer performance of URLLC. Unless we leverage the existing 5G-NR quality of service handling mechanisms to separate the traffic from the two services, our simulation results show that the impact of distributed AI on the availability of the URLLC devices is significant. Moreover, with proper setting of distributed AI (e.g., proper user selection), we can substantially reduce network resource utilization, leading to lower latency for distributed AI and higher availability for the URLLC users. Our results provide important insights for future 6G and AI standardization.

Due to the large bandwidth available, millimeter-Wave (mmWave) bands are considered a viable opportunity to significantly increase the data rate in cellular and wireless networks. Nevertheless, the need for beamforming and directional communication between the transmitter and the receiver increases the complexity of the channel estimation and link establishment phase. Location-aided beamforming approaches have the potential to enable fast link establishment in mmWave networks. However, these are often very sensitive to location errors. In this work, we propose a beamforming algorithm based on tracking spatial correlation of the available strong paths between the transmitter and the receiver. We show that our method is robust to uncertainty in location information, i.e., location error and can provide a reliable connection to a moving user along a trajectory. The numerical results show that our approach outperforms benchmarks on various levels of error in the location information accuracy. The gain is more prominent in high location error scenarios.

In distributed optimization, parameter updates from the gradient computing node devices have to be aggregated in every iteration on the orchestrating server. When these updates are sent over an arbitrary commodity network, bandwidth and latency can be limiting factors. We propose a communication framework where nodes may skip unnecessary uploads. Every node locally accumulates an error vector in memory and self-triggers the upload of the memory contents to the parameter server using a significance filter. The server then uses a history of the nodes’ gradients to update the parameter. We characterize the convergence rate of our algorithm in smooth settings (strongly-convex, convex, and non-convex) and show that it enjoys the same convergence rate as when sending gradients every iteration, with substantially fewer uploads. Numerical experiments on real data indicate a significant reduction of used network resources (total communicated bits and latency), especially in large networks, compared to state-of-the-art algorithms. Our results provide important practical insights for using machine learning over resource-constrained networks, including Internet-of-Things and geo-separated datasets across the globe.

Communication systems supporting cyber-physical production applications should satisfy stringent delay and reliability requirements. Violation of these requirements may result in faulty behavior of the system and cause significant economic losses. Although wireless communications enable mobility and easy maintenance to industrial networks, it introduces many challenges to high-performance control systems due to interference and harsh environments (e.g., vibrations and many metallic objects). Diversity techniques and power control are powerful approaches to reduce latency and enhance reliability at the expense of excessive resource usage due to redundant transmissions. In this paper, we adopt fundamental metrics from reliability literature to wireless communications and provide critical indicators to measure reliability key performance indicators (KPIs) of cyber-physical systems. Then, we design a deep reinforcement learning orchestrator for power control and hybrid automatic repeat request retransmissions to optimize our reliability KPIs. Our orchestrator enables near real-time control and can be implemented on the edge cloud. We implement our framework on 3GPP compliant simulator on a factory automation scenario. Our comprehensive experiments show that, compared to the state-of-the-art, our solution can substantially improve the performance, especially for 5th percentile availability.

Millimeter-wave (mmWave) communication is a promising solution to the high data rate demands in the upcoming 5G and beyond communication networks. When it comes to supporting seamless connectivity in mobile scenarios, resource and handover management are two of the main challenges in mmWave networks. In this paper, we address these two problems jointly and propose a learning-based load balancing handover in multi-user mobile mmWave networks. Our handover algorithm selects a backup base station and allocates the resource to maximize the sum rate of all the users while ensuring a target rate threshold and preventing excessive handovers. We model the user association as a non-convex optimization problem. Then, by applying a deep deterministic policy gradient (DDPG) method, we approximate the solution of the optimization problem. Through simulations, we show that our proposed algorithm minimizes the number of the events where a user's rate is less than its minimum rate requirement and minimizes the number of handovers while increasing the sum rate of all users.

This paper addresses the problem of distributed training of a machine learning model over the nodes of a wireless communication network. Existing distributed training methods are not explicitly designed for these networks, which usually have physical limitations on bandwidth, delay, or computation, thus hindering or even blocking the training tasks. To address such a problem, we consider a general class of algorithms where the training is performed by iterative distributed computations across the nodes. We assume that the nodes have some background traffic and communicate using the slotted-ALOHA protocol. We propose an iteration-termination criterion to investigate the trade-off between achievable training performance and the overall cost of running the algorithms. We show that, given a total running budget, the training performance becomes worse as either the background communication traffic or the dimension of the training problem increases. We conclude that a co-design of distributed optimization algorithms and communication protocols is essential for the success of machine learning over wireless networks and edge computing.

The Internet of Audio Things (IoAuT) is an emerging research field positioned at the intersection of the Internet of Things, sound and music computing, artificial intelligence, and human-computer interaction. The IoAuT refers to the networks of computing devices embedded in physical objects (Audio Things) dedicated to the production, reception, analysis, and understanding of audio in distributed environments. Audio Things, such as nodes of wireless acoustic sensor networks, are connected by an infrastructure that enables multidirectional communication, both locally and remotely. In this article, we first review the state of the art of this field, then we present a vision for the IoAuT and its motivations. In the proposed vision, the IoAuT enables the connection of digital and physical domains by means of appropriate information and communication technologies, fostering novel applications and services based on auditory information. The ecosystems associated with the IoAuT include interoperable devices and services that connect humans and machines to support human-human and human-machines interactions. We discuss the challenges and implications of this field, which lead to future research directions on the topics of privacy, security, design of Audio Things, and methods for the analysis and representation of audio-related information.

Wirelessly-powered sensor networks (WPSNs) are becoming increasingly important in different monitoring applications. We consider a WPSN where a multiple-antenna base station, which is dedicated for energy transmission, sends pilot signals to estimate the channel state information and consequently shapes the energy beams toward the sensor nodes. Given a fixed energy budget at the base station, in this paper, we investigate the novel problem of optimally allocating the power for the channel estimation and for the energy transmission. We formulate this non-convex optimization problem for general channel estimation and beamforming schemes that satisfy some qualification conditions. We provide a new solution approach and a performance analysis in terms of optimality and complexity. We also present a closed-form solution for the case where the channels are estimated based on a least square channel estimation and a maximum ratio transmit beamforming scheme. The analysis and simulations indicate a significant gain in terms of the network sensing rate, compared to the fixed power allocation, and the importance of improving the channel estimation efficiency.

Finding a dataset of minimal cardinality to characterize the optimal parameters of a model is of paramount importance in machine learning and distributed optimization over a network. This paper investigates the compressibility of large datasets. More specifically, we propose a framework that jointly learns the input-output mapping as well as the most representative samples of the dataset (sufficient dataset). Our analytical results show that the cardinality of the sufficient dataset increases sub-linearly with respect to the original dataset size. Numerical evaluations of real datasets reveal a large compressibility, up to 95%, without a noticeable drop in the learnability performance, measured by the generalization error.

We design a lightweight beam-searching algorithm for mobile millimeter-wave systems. We construct and maintain a set of path skeletons, i.e., potential paths between a user and the serving base station to substantially expedite the beam-searching process. To exploit the spatial correlations of the channels, we propose an efficient algorithm that measures the similarity of the skeletons and re-executes the beam-searching procedure only when the old one becomes obsolete. We identify and optimize several tradeoffs between: i) the beam-searching overhead and the instantaneous rate of the users, and ii) the number of users and the update overhead of the path skeletons. Simulation results in an outdoor environment with real building map data show that the proposed method can significantly improve the performance of beam-searching in terms of latency, energy consumption and achievable throughout.

While the current generation of mobile and fixed communication networks has been standardized for mobile broadband services, the next generation is driven by the vision of the Internet of Things and mission-critical communication services requiring latency in the order of milliseconds or submilliseconds. However, these new stringent requirements have a large technical impact on the design of all layers of the communication protocol stack. The cross-layer interactions are complex due to the multiple design principles and technologies that contribute to the layers' design and fundamental performance limitations. We will be able to develop low-latency networks only if we address the problem of these complex interactions from the new point of view of submilliseconds latency. In this paper, we propose a holistic analysis and classification of the main design principles and enabling technologies that will make it possible to deploy low-latency wireless communication networks. We argue that these design principles and enabling technologies must be carefully orchestrated to meet the stringent requirements and to manage the inherent tradeoffs between low latency and traditional performance metrics. We also review currently ongoing standardization activities in prominent standards associations, and discuss open problems for future research.

The underutilized millimeter-wave (mm-wave) band is a promising candidate to enable extremely high data rate communications in future wireless networks. However, the special characteristics of the mm-wave systems such as high vulnerability to obstacles (due to high penetration loss) and to mobility (due to directional communications) demand a careful design of the association between the clients and access points (APs). This challenge can be addressed by distributed association techniques that gracefully adapt to wireless channel variations and client mobilities. We formulated the association problem as a mixed-integer optimization aiming to maximize the network throughput with proportional fairness guarantees. This optimization problem is solved first by a distributed dual decomposition algorithm, and then by a novel distributed auction algorithm where the clients act asynchronously to achieve near-to-optimal association between the clients and APs. The latter algorithm has a faster convergence with a negligible drop in the resulting network throughput. A distinguishing novel feature of the proposed algorithms is that the resulting optimal association does not have to be re-computed every time the network changes (e.g., due to mobility). Instead, the algorithms continuously adapt to the network variations and are thus very efficient. We discuss the implementation of the proposed algorithms on top of existing communication standards. The numerical analysis verifies the ability of the proposed algorithms to optimize the association and to maintain optimality in the time-variant environments of the mm-wave networks.

In wireless communication networks, interference models are routinely used for tasks, such as performance analysis, optimization, and protocol design. These tasks are heavily affected by the accuracy and tractability of the interference models. Yet, quantifying the accuracy of these models remains a major challenge. In this paper, we propose a new index for assessing the accuracy of any interference model under any network scenario. Specifically, it is based on a new index that quantifies the ability of any interference model in correctly predicting harmful interference events, that is, link outages. We consider specific wireless scenario of both conventional sub-6 GHz and millimeter-wave networks and demonstrate how our index yields insights into the possibility of simplifying the set of dominant interferers, replacing a Nakagami or Rayleigh random fading by an equivalent deterministic channel, and ignoring antenna sidelobes. Our analysis reveals that in highly directional antenna settings with obstructions, even simple interference models (such as the classical protocol model) are accurate, while with omnidirectional antennas, more sophisticated and complex interference models (such as the classical physical model) are necessary. Our new approach makes it possible to adopt the simplest interference model of adequate accuracy for every wireless network.

Although the benefits of precoding and combining of data streams are widely recognized, the potential of precoding the pilot signals at the user equipment (UE) side and combining them at the base station (BS) side has not received adequate attention. This paper considers a multiuser multiple input multiple output (MU-MIMO) cellular system in which the BS acquires channel state information (CSI) by means of uplink pilot signals and proposes pilot precoding and combining to improve the CSI quality. We first evaluate the channel estimation performance of a baseline scenario in which CSI is acquired with no pilot precoding. Next, we characterize the channel estimation error when the pilot signals are precoded by spatial filters that asymptotically maximize the channel estimation quality. Finally, we study the case when, in addition to pilot precoding at the UE side, the BS utilizes the second order statistics of the channels to further improve the channel estimation performance. The analytical and numerical results show that, specially in scenarios with large number of antennas at the BS and UEs, pilot precoding and combining has a great potential to improve the channel estimation quality in MU-MIMO systems.

Although the benefits of precoding and combining data signals are widely recognized, the potential of these techniques for pilot transmission is not fully understood. This is particularly relevant for multiuser multiple-input multiple-output (MU-MIMO) cellular systems using millimeter-wave (mmWave) communications, where multiple antennas have to be used both at the transmitter and the receiver to overcome the severe path loss. In this paper, we characterize the gains of pilot precoding and combining in terms of channel estimation quality and achievable data rate. Specifically, we consider three uplink pilot transmission scenarios in an mmWave MU-MIMO cellular system: 1) non-precoded and uncombined; 2) precoded but uncombined; and 3) precoded and combined. We show that a simple precoder that utilizes only the second-order statistics of the channel reduces the variance of the channel estimation error by a factor that is proportional to the number of user equipment (UE) antennas. We also show that using a linear combiner design based on the second-order statistics of the channel significantly reduces multiuser interference and provides the possibility of reusing some pilots. Specifically, in the large antenna regime, pilot precoding and combining help to accommodate a large number of UEs in one cell, significantly improve channel estimation quality, boost the signal-to-noise ratio of the UEs located close to the cell edges, alleviate pilot contamination, and address the imbalanced coverage of pilot and data signals.

We develop a new framework for measuring and comparing the accuracy of any wireless interference models used in the analysis and design of wireless networks. Our approach is based on a new index that assesses the ability of the interference model to correctly predict harmful interference events, i.e., link outages. We use this new index to quantify the accuracy of various interference models used in the literature, under various scenarios such as Rayleigh fading wireless channels, directional antennas, and blockage (impenetrable obstacles) in the network. Our analysis reveals that in highly directional antenna settings with obstructions, even simple interference models (e.g., the classical protocol model) are accurate, while with omnidirectional antennas, more sophisticated and complex interference models (e.g., the classical physical model) are necessary. Our new approach makes it possible to adopt the appropriate interference model of adequate accuracy and simplicity in different settings.

This paper investigates the extent to which spectrum sharing in millimeter-wave (mmWave) networks with multiple cellular operators is a viable alternative to traditional dedicated spectrum allocation. Specifically, we develop a general mathematical framework to characterize the performance gain that can be obtained when spectrum sharing is used, as a function of the underlying beamforming, operator coordination, bandwidth, and infrastructure sharing scenarios. The framework is based on joint beamforming and cell association optimization, with the objective of maximizing the long-term throughput of the users. Our asymptotic and non-asymptotic performance analyses reveal five key points: 1) spectrum sharing with light on-demand intra- and inter-operator coordination is feasible, especially at higher mmWave frequencies (for example, 73 GHz); 2) directional communications at the user equipment substantially alleviate the potential disadvantages of spectrum sharing (such as higher multiuser interference); 3) large numbers of antenna elements can reduce the need for coordination and simplify the implementation of spectrum sharing; 4) while inter-operator coordination can be neglected in the large-antenna regime, intra-operator coordination can still bring gains by balancing the network load; and 5) critical control signals among base stations, operators, and user equipment should be protected from the adverse effects of spectrum sharing, for example by means of exclusive resource allocation. The results of this paper, and their extensions obtained by relaxing some ideal assumptions, can provide important insights for future standardization and spectrum policy.

Millimeter-wave (mmWave) communication systems use a large number of antenna elements that can potentially overcome severe channel attenuation by narrow beamforming. Narrow-beam operation in mmWave networks also reduces multiuser interference, introducing the concept of noise-limited wireless networks as opposed to interference-limited ones. The noise-limited or interference-limited regime heavily reflects on the medium access control (MAC) layer throughput and on proper resource allocation and interference management strategies. Yet, these regimes are ignored in current approaches to mmWave MAC layer design, with the potential disastrous consequences on the communication performance. In this paper, we investigate these regimes in terms of collision probability and throughput. We derive tractable closed-form expressions for the collision probability and MAC layer throughput of mmWave ad hoc networks, operating under slotted ALOHA. The new analysis reveals that mmWave networks may exhibit a non-negligible transitional behavior from a noise-limited regime to an interference-limited one, depending on the density of the transmitters, density and size of obstacles, transmission probability, operating beamwidth, and transmission power. Such transitional behavior necessitates a new framework of adaptive hybrid resource allocation procedure, containing both contention-based and contention-free phases with on-demand realization of the contention-free phase. Moreover, the conventional collision avoidance procedure in the contention-based phase should be revisited, due to the transitional behavior of interference, to maximize throughput/delay performance of mmWave networks. We conclude that, unless proper hybrid schemes are investigated, the severity of the transitional behavior may significantly reduce throughput/delay performance of mmWave networks.

Millimeter wave (mmWave) systems are emerging as an essential technology for enabling extremely high data rate wireless communications. The main limiting factors of mmWave systems are blockage (high penetration loss) and deafness (misalignment between the beams of the transmitter and receiver). To alleviate these problems, it is imperative to incorporate efficient association and relaying between terminals and access points. Unfortunately, the existing association techniques are designed for the traditional interference-limited networks, and thus are highly suboptimal for mmWave communications due to narrow-beam operations and the resulting non-negligible interference-free behavior. This paper introduces a distributed approach that solves the joint association and relaying problem in mmWave networks considering the load balancing at access points. The problem is posed as a novel stochastic optimization problem, which is solved by distributed auction algorithms where the clients and relays act asynchronously to achieve optimal client-relay-access point association. It is shown that the algorithms provably converge to a solution that maximizes the aggregate logarithmic utility within a desired bound. Numerical results allow quantification of the performance enhancements introduced by the relays, and the substantial improvements of the network throughput and fairness among the clients by the proposed association method as compared to standard approaches. It is concluded that mmWave communications with proper association and relaying mechanisms can support extremely high data rates, connection reliability, and fairness among the clients.

Millimeter wave (mmWave) wireless networks rely on narrow beams to support multi-gigabit data rates. Nevertheless, the alignment of transmitter and receiver beams is a time-consuming operation, which introduces an alignment-throughput tradeoff. A wider beamwidth reduces the alignment overhead, but leads also to reduced directivity gains. Moreover, existing mmWave standards schedule a single transmission in each time slot, although directional communications facilitate multiple concurrent transmissions. In this paper, a joint consideration of the problems of beamwidth selection and scheduling is proposed to maximize effective network throughput. The resulting optimization problem requires exact knowledge of network topology, which may not be available in practice. Therefore, two standard-compliant approximation algorithms are developed, which rely on underestimation and overestimation of interference. The first one aims to maximize the reuse of available spectrum, whereas the second one is a more conservative approach that schedules together only links that cause no interference. Extensive performance analysis provides useful insights on the directionality level and the number of concurrent transmissions that should be pursued. Interestingly, extremely narrow beams are in general not optimal.

Strict quality of service requirements of industrial applications, challenged by harsh environments and huge interference especially in multi-vendor sites, demand incorporation of cognition in industrial wireless sensor networks (IWSNs). In this paper, a distributed protocol of light complexity for congestion regulation in cognitive IWSNs is proposed to improve the channel utilization while ensuring predetermined performance for specific devices, called primary devices. By sensing the congestion level of a channel with local measurements, a novel congestion control protocol is proposed by which every device decides whether it should continue operating on the channel, or vacate it in case of saturation. Such a protocol dynamically changes the congestion level based on variations of non-stationary wireless environment as well as traffic demands of the devices. The proposed protocol is implemented on STM32W108 chips that offer IEEE 802.15.4 standard communications. Experimental results confirm substantial performance enhancement compared to the original standard, while imposing almost no signaling/computational overhead. In particular, channel utilization is increased by 56% with fairness and delay guarantees. The presented results provide useful insights on low-complexity adaptive congestion control mechanism in IWSNs.

Developing an efficient spectrum access policy enables cognitive radios to dramatically increase spectrum utilization while ensuring the predetermined quality of service levels for primary users (PUs). In this paper, the modeling, performance analysis, and optimization of a distributed secondary network with a random sensing order policy are studied. Specifically, secondary users (SUs) create a random order of available channels upon PUs' return, and then, they find optimal transmission and handoff opportunities in a distributed manner. By a Markov chain analysis, the average throughputs of the SUs and the average interference level among the SUs and the PUs are investigated. A maximization of the secondary network performance in terms of the throughput while keeping under control the average interference is proposed. It is shown that, despite traditional views, a nonzero false alarm in the channel sensing can increase channel utilization, particularly in a dense secondary network where the contention is too high. Then, two simple and practical adaptive algorithms are established to optimize the network. The second algorithm follows the variations of the wireless channels in nonstationary conditions and outperforms even static brute force optimization while demanding few computations. The convergence of the distributed algorithms is theoretically investigated based on the analytical performance indicators established by the Markov chain analysis. Finally, numerical results validate the analytical derivations and demonstrate the efficiency of the proposed schemes. It is concluded that fully distributed sensing order algorithms can lead to substantial performance improvements in cognitive radio networks without the need for centralized management or message passing among the users.

The millimeter-wave (mmWave) frequency band is seen as a key enabler of multigigabit wireless access in future cellular networks. In order to overcome the propagation challenges, mmWave systems use a large number of antenna elements both at the base station and at the user equipment, which leads to high directivity gains, fully directional communications, and possible noise-limited operations. The fundamental differences between mmWave networks and traditional ones challenge the classical design constraints, objectives, and available degrees of freedom. This paper addresses the implications that highly directional communication has on the design of an efficient medium access control (MAC) layer. The paper discusses key MAC layer issues, such as synchronization, random access, handover, channelization, interference management, scheduling, and association. This paper provides an integrated view on MAC layer issues for cellular networks, identifies new challenges and tradeoffs, and provides novel insights and solution approaches.

Developing an efficient spectrum access policy enables cognitive radios to dramatically increase spectrum utilization while assuring predetermined quality of service levels for the primary users. In this paper, modeling, performance analysis, and optimization of a distributed secondary network with random sensing order policy are studied. Specifically, the secondary users create a random order of the available channels and then find a transmission opportunity in a distributed manner. By a Markov chain analysis, the average throughputs of the secondary users and average interference level between the secondary and primary users are evaluated. Then, a maximization of the performance of the secondary network in terms of throughput while keeping under control the average interference is proposed. A simple and practical adaptive algorithm is established to optimize the network. Finally, numerical results are provided to validate the analytical derivations and demonstrate the performance of the proposed schemes. It is shown that distributed algorithms can achieve substantial performance improvements in cognitive radio networks without the need of centralized operations or management.

In this study, the average throughput maximisation of a secondary user (SU) by optimising its spectrum sensing time is formulated, assuming that a priori knowledge of the presence and absence probabilities of the primary users (PUs) is available. The energy consumed to find a transmission opportunity is evaluated, and a discussion on the impacts of the number of PUs on SU throughput and consumed energy are presented. To avoid the challenges associated with the analytical method, as a second solution, a systematic adaptive neural network‐based sensing time optimisation approach is also proposed. The proposed scheme is able to find the optimum value of the channel sensing time without any prior knowledge or assumption about the wireless environment. The structure, performance and cooperation of the artificial neural networks used in the proposed method are explained in detail, and a set of illustrative simulation results is presented to validate the analytical results as well as the performance of the proposed learning‐based optimisation scheme.

Effective spectrum sensing strategies enable cognitive radios (CRs) to identify and opportunistically transmit on under-utilized spectral resources. In this paper, sequential channel sensing problems for single and multiple secondary users (SUs) networks are effectively modeled through finite state Markovian processes. More specifically, a model for single user case is introduced and its performance is validated through analytical analysis. Then, in order to address multiple SUs case, this model is extended to include the modified p-persistent access (MPPA) protocol. Since the scheme utilized experiences a high level of collision among the SUs, to mitigate the problem appropriately, p-persistent random access (PPRA) protocol is considered, which offers higher average throughput for SUs by statistically distributing their loads among all channels. The structure and performance of the proposed schemes are discussed in detail, and a set of illustrative numerical results is presented to validate and compare the performance of the proposed sense-access strategies.

Powerful spectrum decision schemes enable cognitive radios (CRs) to find transmission opportunities in spectral resources allocated exclusively to the primary users. One of the key effecting factors on the CR network throughput is the spectrum sensing sequence used by each secondary user (SU). In this study, SUs’ throughput maximisation through finding an appropriate sensing matrix (SM) is investigated. First, the average throughput of the CR network is evaluated for a given SM. Then, an optimisation problem based on the maximisation of the network throughput is formulated in order to find the optimal SM. As the optimum solution is very complicated, three novel suboptimal solutions are proposed for various cases including perfect and non-perfect sensing. Despite having less computational complexities as well as lower consumed energies, the proposed solutions perform quite well compared to the optimum solution. The structure and performance of the proposed SM setting schemes are discussed in detail and a set of illustrative numerical results is presented to validate their efficiencies.