As technology continues to shrink, reducing leakage power of Field-Programmable Gate Arrays (FPGAs) becomes a critical issue for the practical use of FPGAs. In this article, we address the leakage issue of partially dynamically reconfigurable FPGA architectures with sleep transistors embedded into FPGA fabrics. In particular, we focus on eliminating leakage waste due to the delay between reconfiguration and execution time of a task. For partially dynamically reconfigurable FPGAs, the configuration prefetching technique is commonly used to hide runtime reconfiguration overhead. With prefetching, the configuration of a task is loaded into FPGAs as early as possible. Therefore, there is often a delay between reconfiguration and execution time of a task. In this period of time, the SRAM cells allocated to a task cannot be turned off even though they are not utilized. In this article, we propose a two-stage task scheduling methodology to reduce leakage waste due to the delay between reconfiguration and execution time of a task without sacrificing performance. In the first stage, a performance-driven task scheduler that targets at minimizing the schedule length is invoked to generate an initial placement. In the second stage, a postplacement leakage-aware task scheduling is applied to refine the initial placement such that leakage waste is minimized provided that the schedule length is not increased. To solve the postplacement leakage optimization problem, we propose two algorithms. The first one is an optimal algorithm based on Integer Linear Programming (ILP). The second algorithm is a heuristic approach that iteratively refines the placement to reduce leakage waste. Experimental results on real and synthetic designs show that the efficiency and effectiveness of the proposed postplacement leakage reduction techniques.

Given a set of pins and a set of obstacles on a plane, an obstacle-avoiding rectilinear Steiner minimal tree (OARSMT) connects these pins, possibly through some additional points (called the Steiner points), and avoids running through any obstacle to construct a tree with a minimal total wirelength. The OARSMT problem becomes more important than ever for modern nanometer IC designs which need to consider numerous routing obstacles incurred from power networks, prerouted nets, IP blocks, feature patterns for manufacturability improvement, antenna jumpers for reliability enhancement, etc. Consequently, the OARSMT problem has received dramatically increasing attention recently. Nevertheless, considering obstacles significantly increases the problem complexity, and thus, most previous works suffer from either poor quality or expensive running time. Based on the obstacle-avoiding spanning graph, this paper presents an efficient algorithm with some theoretical optimality guarantees for the OARSMT construction. Unlike previous heuristics, our algorithm guarantees to find an optimal OARSMT for any two-pin net and many higher pin nets. Extensive experiments show that our algorithm results in significantly shorter wirelengths than all state-of-the-art works.

As technology continues to shrink, leakage power becomes animportant issue for modern FPGAs. In this paper, we address the leakage issue of partially dynamical reconfigurable FPGAs. We focus on eliminating leakage waste due to the delay between reconfiguration and task execution. We propose a post-placement leakage-aware scheduling algorithm that refines a placement generated by a performance-driven scheduler such that leakage waste is minimized and performance is not sacrificed. Experimental results on real and synthetic designs demonstrate the effectiveness and efficiency of our algorithm on leakage optimization.

Given a set of pins and a set of obstacles on a plane, an obstacle-avoiding rectilinear Steiner minimal tree (OARSMT) connects these pins, possibly through some additional points (called Steiner points), and avoids running through any obstacle to construct a tree with a minimal total wirelength. The OARSMT problem becomes more important than ever for modern nanometer IC designs which need to consider numerous routing obstacles incurred from power networks, prerouted nets, IP blocks, feature patterns for manufacturability improvement, antenna jumpers for reliability enhancement, etc. Consequently, the OARSMT problem has received dramatically increasing attention recently. Nevertheless, considering obstacles significantly increases the problem complexity, and thus most previous works suffer from either poor quality or expensive running time. Based on the obstacle-avoiding spanning graph (OASG), this paper presents an efficient algorithm with some theoretical optimality guarantees for the OARSMT construction. Unlike previous heuristics, our algorithm guarantees to find an optimal OARSMT for any 2-pin net and many higher-pin nets. Extensive experiments show that our algorithm results in significantly shorter wirelengths than all state-of-the-art works.