A Telecube is a cubic module that has six prismatic degrees of freedom whose sides can expand more than twice its original length and has the ability to magnetically (de)attach to other modules. Many of these modules can be connected together to form a modular self-reconfigurable robot. The paper presents the intended functions, discusses the physical requirements of the modules and describes two key mechanical components: a compact telescoping linear actuator and a switching permanent magnet device.

We discuss the theoretical limitations for reconfiguration of metamorphic robots made up of Telecubes, six degree of freedom cube shaped modules currently being developed at Xerox PARC. We show that by using meta-modules composed of 8 individual modules as a backbone for building the desired shape, we can establish completeness for the reconfiguration as well as time and space bounds for the process. Finally we present several open problems in the field of reconfiguration.

We present a complete, local, and parallel reconfiguration algorithm for metamorphic robots made up of Telecubes, six degree of freedom cube shaped modules currently being developed at PARC. We show that by using 2 /spl times/ 2 /spl times/ 2 meta-modules we can achieve completeness of reconfiguration space using only local rules. Furthermore, this reconfiguration can be done in place and massively in parallel with many simultaneous module movements. Finally we present a loose quadratic upper bound on the total number of module movements required by the algorithm.

Some engineering applications require structures to expand and contract in size, while retaining their exterior shape. The applications range from mundane daily life objects to more fancy art structures. In contrast to a multiple degree-of-freedom structure, a single degree-of-freedom structure can be driven by a single actuator, reducing the cost and simplifying the control. In this paper, we study single degree-of-freedom structures that can be formed by a lattice of single degree-of-freedom polyhedral expanding units. Due to built-in symmetries, the entire structure can expand and contract as one of the units in the structure is actuated.

The first micromachined bimorph organic ciliary array with on-chip CMOS circuitry is presented. This device is composed of an 8/spl times/8 array of cells each having four orthogonally oriented actuators in on overall die-size of 9.4 mm/spl times/9.4 mm. The polyimide based actuators were fabricated directly above the selection and drive circuitry. Selection and activation of actuators in this array shows that integration was successful. The integration of CMOS electronics and MEMS micromechanisms allows the implementation of new task-level micromanipulation strategies. New low-level control algorithms (actuator gaits) were also demonstrated. The array was programmed to perform several kinds of manipulation tasks, including linear translation, diagonal motion, as well as vector field operations such as squeeze field and radial field orienting and centering. Preliminary experiments were also performed using thin silicon dice of about 3 mm/spl times/3 mm/spl times/0.5 mm size as the object being moved.

Distributed manipulation experiments were performed using a massively-parallel, microfabricated actuator array. An organic ciliary array of thin-film polyimide bimorph microactuators exploiting combined thermal and electrostatic control was employed to implement task-level, sensorless manipulation strategies for macroscopic objects. The tasks of parts-translation, -rotation, -orientation, and -centering were demonstrated using small integrated circuit (IC) dice. Strategies were programmed in a fine-grained SIMD (single instruction, multiple data) fashion by specifying planar force vector fields. When a part is placed on the array, the programmed vector field induces a force and moment upon it. The part's equilibrium states may be predicted and cascaded (using a sequence of fields) to bring the part to a desired final state. Vector fields with and without potential were tested in experiments, and the behavior of parts in the fields was compared with the theory of programmable vector fields. These fields were implemented by actuating the organic cilia in a cyclic, gait-like fashion. Motion in non-principal (e.g. diagonal) directions was effected by a pairwise coupling of the cilia to implement virtual cilia. These experiments suggest that MEMS actuator arrays are useful for parts-orientation, -posing, -transfer, -singulation, and -sorting.