In this article, we consider a cellular network deployment where UAV-to-UAV (U2U) transmit-receive pairs coexist with the uplink (UL) of cellular ground users (GUEs). Our analysis focuses on comparing two spectrum sharing mechanisms: i) overlay, where the available time-frequency resources are split into orthogonal portions for U2U and GUE communications, and ii) underlay, where the same resources may be accessed by both link types, resulting in mutual interference. We evaluate the coverage probability and rate of all links and their interplay to identify the best spectrum sharing mechanism. Among other things, our results demonstrate that, in scenarios with a large number of UAV pairs, adopting overlay spectrum sharing seems the most suitable approach for maintaining a minimum guaranteed rate for UAVs and a high GUE UL performance. We also find that increasing the density of U2U links degrades their rates in the overlay-where UAVs only receive interference from other UAVs-, but not significantly so in the underlay- where the effect of GUE-generated interference is dominant.

In this article, we evaluate the performance of the parameterized spatial reuse (PSR) framework of IEEE 802.11ax, mainly focusing on its impact on transmission latency. Based on detailed standard-compliant system-level simulations, we provide a realistic analysis of the effects of PSR considering different scenario densities, traffic loads, and access points (APs) antenna capabilities to quantify its performance gains under various scenarios. Our results show that, in medium-density scenarios, PSR can offer up to a 3.8× reduction in the 5% worst-case latencies for delay-sensitive stations with respect to an 802.11ax system without PSR. Moreover, our study demonstrates that, for low-latency communications, providing the network with PSR capabilities may be an appealing alternative to the deployment of more costly multi-antenna APs.

Wi-Fi technology is continuously evolving to keep the pace with the fast-increasing demand for new digital services and applications. In particular, Wi-Fi 6 is becoming widely available in residential and enterprise scenarios supporting up to eight spatial streams. At the same time, large antenna arrays have already shown their ability and benefits when serving a large number of devices simultaneously. Since enterprise owners are already upgrading their indoor private networks with the next generation of Wi-Fi products, it becomes crucial to understand the capacity limits and the benefits associated to different deployment strategies and large antenna array configurations. The scope of this paper is to provide concrete insights to internet service providers and enterprise owners on how to upgrade, deploy, and efficiently operate their networks with next-generation Wi-Fi access points, showing their potential performance improvements and providing a set of clear guidelines.

In this paper, we investigate the use of highly directional, hybrid antenna arrays in residential Wi-Fi mesh deployments to further improve their performance in challenging conditions where high wall losses are encountered. We also formulate a metric to quantify the quality of the Wi-Fi coverage, and present a deployment procedure to automatically select extender AP locations to maximise such metric. Using the proposed deployment procedure, the performance of highly directional, hybrid antenna arrays in residential Wi-Fi mesh deployments is evaluated through simulations. Compared with the benchmark of omni-directional antennas, we show that using the proposed array increases the areas achieving peak throughput by more than 3 times.

Indoor areas, such as offices and shopping malls, are a natural environment for initial millimeter-wave (mmWave) deployments. Although we already have the technology that enables us to realize indoor mmWave deployments, there are many remaining challenges associated with system-level design and planning for such. The objective of this article is to bring together multiple strands of research to provide a comprehensive and integrated framework for the design and performance evaluation of indoor mmWave systems. This article introduces the framework with a status update on mmWave technology, including ongoing fifth generation (5G) wireless standardization efforts and then moves on to experimentally validated channel models that inform performance evaluation and deployment planning. Together these yield insights on indoor mmWave deployment strategies and system configurations, from feasible deployment densities to beam management strategies and necessary capacity extensions.

We consider a cellular network deployment where UAV-to-UAV (U2U) transmit-receive pairs share the same spectrum with the uplink (UL) of cellular ground users (GUEs). For this setup, we focus on analyzing and comparing the performance of two spectrum sharing mechanisms: (i) underlay, where the same time-frequency resources may be accessed by both UAVs and GUEs, resulting in mutual interference, and (ii) overlay, where the available resources are divided into orthogonal portions for U2U and GUE communications. We evaluate the coverage probability and rate of both link types and their interplay to identify the best spectrum sharing strategy. We do so through an analytical framework that embraces realistic height-dependent channel models, antenna patterns, and practical power control mechanisms. For the underlay, we find that although the presence of U2U direct communications may worsen the uplink performance of GUEs, such effect is limited as base stations receive the power-constrained UAV signals through their antenna sidelobes. In spite of this, our results lead us to conclude that in urban scenarios with a large number of UAV pairs, adopting an overlay spectrum sharing seems the most suitable approach for maintaining a minimum guaranteed rate for UAVs and a high GUE UL performance.

Reliable and direct communication between unmanned aerial vehicles (UAVs) could facilitate autonomous flight, collision avoidance, and cooperation in UAV swarms. In this paper, we consider UAV-to-UAV (U2U) communications underlaying a cellular network, where UAV transmit-receive pairs share the same spectrum with the uplink (UL) of cellular ground users (GUEs). We evaluate the performance of this setup through an analytical framework that embraces realistic height-dependent channel models, antenna patterns, and practical power control mechanisms. Our results demonstrate that, although the presence of U2U communications may worsen the performance of the GUEs, such effect is limited as base stations receive UAV interference through their antenna sidelobes. Moreover, we illustrate that the quality of all links degrades as the UAV height increases- due to a larger number of line-of-sight interferers-, and how the performance of the U2U links can be traded off against that of the GUEs by varying the UAV power control policy.

In this paper, we focus on the coexistence between a MIMO radar and cellular base stations. We study the interfering channel estimation, where the radar is operated in the “search and track” mode, and the BS receives the interference from the radar. Unlike the conventional methods where the radar and the cellular systems fully cooperate with each other, in this paper, we consider that they are uncoordinated and the BS needs to acquire the interfering channel state information (ICSI) by exploiting the radar probing waveforms. For completeness, both the line-of-sight (LoS) and Non-LoS (NLoS) channels are considered in the coexistence scenario. By further assuming that the BS has limited a priori knowledge about the radar waveforms, we propose several hypothesis testing methods to identify the working mode of the radar, and then obtain the ICSI through a variety of channel estimation schemes. Based on the statistical theory, we analyze the theoretical performance of both the hypothesis testing and the channel estimation methods. Finally, the simulation results verify the effectiveness of our theoretical analysis and demonstrate that the BS can effectively estimate the interfering channel even with the limited information from the radar.

A key aspect of the fifth-generation wireless communication network will be the integration of different services and technologies to provide seamless connectivity. In this paper, we consider using massive multiple-input multiple-output (mMIMO) to provide backhaul links to a dense deployment of self-backhauling (s-BH) small cells (SCs) that provide cellular access within the same spectrum resources of the backhaul. Through a comprehensive system-level simulation study, we evaluate the interplay between access and backhaul and the resulting end-to-end user rates. Moreover, we analyze the impact of different SCs deployment strategies, while varying the time resource allocation between radio access and backhaul links. We finally compare the above mMIMO-based s-BH approach to a mMIMO direct access (DA) architecture accounting for the effects of pilot reuse schemes, together with their associated overhead and contamination mitigation effects. The results show that dense SCs deployments supported by mMIMO s-BH provide significant rate improvements for cell-edge users (UEs) in ultra-dense deployments with respect to mMIMO DA, while the latter outperforms mMIMO s-BH from the median UEs' standpoint.

Reliable command and control channels to unmanned aerial vehicles (UAVs) are needed to allow beyond visual line of sight (LoS) operations. Cellular networks, with their almost ubiquitous coverage, are an obvious candidate to provide such conditions. However, up to which extent the current networks designed for ground users can support UAV communications is an open question. In this paper, we provide a comprehensive theoretical analysis, using stochastic geometry, of the performance that operators could expect from traditional cellular networks with omnidirectional antennas when supporting UAV downlink command and control channels. Our study employs the latest UAV height-dependent path loss model defined by the 3GPP, with LoS and non-LoS transmissions and a probabilistic model to switch between them. We derive analytical expressions for the coverage probability and area spectral efficiency, while accounting for base stations with idle mode capabilities, a practical finite UAV density, and different UAV heights. Results show that networks based on base stations with omnidirectional coverage can support low-height UAVs but will struggle with high-height ones. Network densification helps to provide a better performance.

Providing consistently high wireless capacity is becoming increasingly important to support the applications required by future digital enterprises. In this paper, we propose Eigen-direction-aware ZF (EDA-ZF) with partial coordination among base stations (BSs) and distributed interference suppression as a practical approach to achieve this objective. We compare our solution with Zero Forcing (ZF), entailing neither BS coordination or inter-cell interference mitigation, and Network MIMO (NeMIMO), where full BS coordination enables centralized inter-cell interference management. We also evaluate the performance of said schemes for three sub-6 GHz deployments with varying BS densities — sparse, intermediate, and dense — all with fixed total number of antennas and radiated power. Extensive simulations show that: (i) indoor massive MIMO implementing the proposed EDA-ZF provides uniformly good rates for all users; (ii) indoor network densification is detrimental unless full coordination is implemented; (iii) deploying NeMIMO pays off under strong outdoor interference, especially for cell-edge users.

To guarantee the success of massive multiple-input multiple-output (MIMO), one of the main challenges to solve is the efficient management of pilot contamination. Allocation of fully orthogonal pilot sequences across the network would provide a solution to the problem, but the associated overhead would make this approach infeasible in practical systems. Ongoing fifth-generation (5G) standardisation activities are debating the amount of resources to be dedicated to the transmission of pilot sequences, focussing on uplink sounding reference signals (UL SRSs) design. In this paper, we evaluate the performance of various UL SRS allocation strategies in practical deployments, shedding light on their strengths and weaknesses. Furthermore, we introduce a novel UL SRS fractional reuse (FR) scheme, denoted neighbour-aware (FR-NA). The proposed FR-NA generalizes the fixed reuse paradigm, and entails a trade-off between i) aggressively sharing some UL SRS resources, and ii) protecting other UL SRS resources with the aim of relieving neighbouring BSs from pilot contamination. Said features result in a cell throughput improvement over both fixed reuse and state-of-the-art FR based on a cell-centric perspective.

In this work we analyze the benefits of low-complexity radio frequency (RF) switching matrices (SMs) for antenna selection (AS) in large scale antenna systems (LSAS). The reduced RF complexity and insertion losses (ILs) are attained by limiting the number of internal connections in the SM, at the expense of a limited flexibility in the AS. The results presented in this paper demonstrate that partially-connected (PC) SMs outperform conventional fully-flexible (FF) alternatives due to their reduced ILs, which are characterized in this work.

We consider cellular base stations (BSs) equipped with a large number of antennas and operating in the unlicensed band. We denote such system as massive MIMO unlicensed (mMIMO-U). We design the key procedures required to guarantee coexistence between a cellular BS and nearby Wi-Fi devices. These include: neighboring Wi-Fi channel covariance estimation, allocation of spatial degrees of freedom for interference suppression, and enhanced channel sensing and data transmission phases. We evaluate the performance of the so-designed mMIMO-U, showing that it allows simultaneous cellular and Wi-Fi transmissions by keeping their mutual interference below the regulatory threshold. The same is not true for conventional listen-before-talk (LBT) operations. As a result, mMIMO-U boosts the aggregate cellular-plus-Wi-Fi data rate in the unlicensed band with respect to conventional LBT, exhibiting increasing gains as the number of BS antennas grows.

We propose to operate massive multiple-input multiple-output (MIMO) cellular base stations (BSs) in unlicensed bands. We denote such systems as massive MIMO unlicensed (mMIMO-U) ones. We design the key procedures required at a cellular BS to guarantee coexistence with nearby Wi-Fi devices operating in the same band. In particular, spatial reuse is enhanced by actively suppressing interference toward neighboring Wi-Fi devices. Wi-Fi interference rejection is also performed during an enhanced listen-before-talk phase. These operations enable Wi-Fi devices to access the channel as though no cellular BSs were transmitting, and vice versa. Under concurrent Wi-Fi and BS transmissions, the downlink rates attainable by cellular user equipment (UEs) are degraded by the Wi-Fi-generated interference. To mitigate this effect, we select a suitable set of UEs to be served in the unlicensed band accounting for a measure of the Wi-Fi/UE proximity. Our results show that the so-designed mMIMO-U allows simultaneous cellular and Wi-Fi transmissions by keeping their mutual interference below the regulatory threshold. Compared with a system without interference suppression, Wi-Fi devices enjoy a median interference power reduction of between 3 dB with 16 antennas and 18 dB with 128 antennas. With mMIMO-U, cellular BSs can also achieve large data rates without significantly degrading the performance of Wi-Fi networks deployed within their coverage area.

In this paper, we explore reduced-connectivity radio frequency (RF) switching networks for reducing the analog hardware complexity and switching power losses in antenna selection (AS) systems. In particular, we analyze different hardware architectures for implementing the RF switching matrices required in AS designs with a reduced number of RF chains. We explicitly show that fully-flexible switching matrices, which facilitate the selection of any possible subset of antennas and attain the maximum theoretical sum rates of AS, present numerous drawbacks such as the introduction of significant insertion losses, particularly pronounced in massive multiple-input multiple-output (MIMO) systems. Since these disadvantages make fully-flexible switching suboptimal in the energy efficiency sense, we further consider partially-connected switching networks as an alternative switching architecture with reduced hardware complexity, which we characterize in this work. In this context, we also analyze the impact of reduced switching connectivity on the analog hardware and digital signal processing of AS schemes that rely on received signal power information. Overall, the analytical and simulation results shown in this paper demonstrate that partially-connected switching maximizes the energy efficiency of massive MIMO systems for a reduced number of RF chains, while fully-flexible switching offers sub-optimal energy efficiency benefits due to its significant switching power losses.

Space shift keying (SSK) transmission is a low-complexity complement to spatial modulation (SM) that solely relies on a spatial-constellation diagram for conveying information. The achievable performance of SSK is determined by the channel conditions, which in turn define the minimum Euclidean distance (MED) of the symbols in the received SSK constellation. In this contribution we concentrate on improving the power efficiency of SSK transmission via symbol pre-scaling. Specifically, we pose a pair of related optimization problems for a) enhancing the MED at reception while satisfying a given power constraint at the transmitter, and b) reducing the transmission power required for achieving a given MED. The resultant optimization problems are NP-hard, hence they are subsequently reformulated and solved via semidefinite programming. The results presented demonstrate that the proposed pre-scaling strategies are capable of enhancing the attainable performance of conventional SSK, while simultaneously extending its applicability and reducing the complexity of the existing pre-scaling schemes.

In this paper, we explore low-complexity transmission in physically-constrained massive multiple-input multiple-output (MIMO) systems by means of channel state information (CSI) relaxation. In particular, we propose a strategy to take advantage of the correlation experienced by the channels of neighbour antennas when deployed in tightly packed antenna arrays. The proposed scheme is based on collecting CSI for only a subset of antennas during the pilot training stage and, subsequently, using averages of the acquired CSI for the remaining closely-spaced antennas. By doing this, the total number of radio frequency (RF) chains, for both CSI acquisition and data transmission, and the baseband signal processing are reduced, hence simplifying the overall system operation. At the same time, this impacts the quality of the channel estimation produced after the CSI acquisition process. To characterize this tradeoff, we explore the impact that the number of antennas with instantaneous CSI has on the performance, signal processing complexity, and energy efficiency of time-division duplex (TDD) systems. The analytical and simulation results presented in this paper show that the application of the proposed strategy in size-constrained antenna arrays is able to significantly enhance the energy efficiency against systems with full CSI availability, while approximately preserving their average performance.

In this paper we explore low-complexity transmission in massive multiple-input multiple-output (MIMO) systems by exploiting their tolerance to incomplete channel state information (CSI). We propose a strategy to exploit the transmit antenna correlation that arises in the deployment of size-constrained massive base stations (BSs). The feasibility of acquiring the instantaneous CSI for a subset of antennas and then using averages of the acquired CSI for the remaining array elements is studied. In particular, we focus on determining the influence that the percentage of inactive antennas during the CSI acquisition stage has over the signal processing (SP) complexity and the system performance. The presented results show that the proposed approach significantly reduces the computational complexity of size-constrained BSs while approximately preserving the performance of massive MIMO systems with complete CSI.

In this work we present a low-complexity detection scheme for spatial modulation (SM) systems in the large-scale multiple access channel (MAC). The proposed strategy is based on compressive sensing (CS) and it exploits the sparsity and structure of the transmitted SM signals in the MAC to enhance the detection performance. The analytical and simulation results presented in this paper show that the proposed technique outperforms conventional CS and linear detectors with a reduced signal processing complexity.

In this paper we propose a spatial modulation (SM) technique with improved energy efficiency (EE) for the multiple access channel (MAC) with a large number of antennas. The proposed scheme builds upon compressive sensing (CS) and accounts for the sparsity and structure of the signals transmitted via SM in multi-user scenarios to further improve the performance and reduce the complexity of linear detectors. In particular, the proposed technique incorporates additional prior knowledge to conventional CS-based approaches by exploiting the existence of a maximum number of active antennas per user when SM transmission is used in the MAC. The results presented in this paper show that the proposed algorithm offers both a) reduced complexity and b) improved performance compared to conventional CS and linear detection strategies and also allow us to determine the conditions under which the use of SM systems in the MAC is beneficial from an EE point of view.

In this paper, we propose a detector, based on the compressive sensing (CS) principles, for multiple-access spatial modulation (SM) channels with a large-scale antenna base station (BS). Particularly, we exploit the use of a large number of antennas at the BSs and the structure and sparsity of the SM transmitted signals to improve the performance of conventional detection algorithms. Based on the above, we design a CS-based detector that allows the reduction of the signal processing load at the BSs particularly pronounced for SM in large-scale multiple-input-multiple-output (MIMO) systems. We further carry out analytical performance and complexity studies of the proposed scheme to evaluate its usefulness. The theoretical and simulation results presented in this paper show that the proposed strategy constitutes a low-complexity alternative to significantly improve the system's energy efficiency against conventional MIMO detection in the multiple-access channel.

The performance of space shift keying (SSK) is known to be dominated by the minimum Euclidean distance (MED) in the received SSK constellation. In this paper, we propose a method of enhancing the MED in the received SSK constellation and improving both the attainable performance and the power efficiency by means of symbol scaling at the transmitter. To this aim, we formulate a pair of optimization problems, one for maximizing the MED subject to a specific transmit power constraint and one for minimizing the transmit power subject to a MED threshold. As these problems are NP-hard, we re-formulate their optimization using semidefinite relaxations, which results in convex problem formulations that can be efficiently solved using standard approaches. Moreover, we design pre-scaling techniques for imperfect channel state information at the transmitter, where the existing approaches are inapplicable. Our results show that the proposed schemes substantially improve the power efficiency of SSK systems with respect to state-of-the-art techniques by offering an improved performance for specific transmit power requirements or, equivalently, a transmit power reduction for a given MED threshold.

Exploiting interference as a useful resource will be one of the main innovations in 5G communications. In this paper, we explore how to handle the interference to reduce the total transmit power of the Tomlinson-Harashima precoder (THP). We show that the energy efficiency can be improved by adaptively scaling the constellation symbols so that they are better aligned with the interfering signals to be canceled. The theoretical and simulation results of this paper prove that the proposed technique is not only able to preserve the average performance of the conventional THP, but it can also increase its power efficiency by a factor of 2 in the considered scenarios.

We propose a power-efficient Tomlinson-Harashima precoder (THP) in the downlink of multi-user multiple-input single-output (MU-MISO) systems, where a transmit power reduction is achieved by means of interference optimization. The adopted approach is based on adaptively scaling the symbols of a number of users whose received signal-to-noise ratio (SNR) thresholds are known to the transmitter. By doing this, the interference can be better aligned to the symbols of interest, thus reducing the power required to cancel it. The scaling is performed by forming a constrained optimization problem, solved with existing well-known techniques, which entails an increase in the computational complexity at the base station. To quantify this trade-off in performance and complexity, a study of the impact in the signal processing load is carried out by means of a power efficiency analysis. The presented analytical and simulation results in this paper confirm that the proposed technique increases the power efficiency up to 100% with respect to previous THP-based approaches while, at the same time, maintaining the same average performance.