Semantic communications (SemComs) have emerged as a promising paradigm for joint data and task-oriented transmissions, combining the demands for both the bit-accurate delivery and end-to-end (E2E) distortion minimization. However, current joint source-channel coding (JSCC) in SemComs is not compatible with the existing communication systems and cannot adapt to the variations of the sources or the channels, while separate source-channel coding (SSCC) is suboptimal in the finite blocklength regime. To address these issues, we propose an adaptive source-channel coding (ASCC) scheme for SemComs over parallel Gaussian channels, where the deep neural network (DNN)-based semantic source coding and conventional digital channel coding are separately deployed and adaptively designed. To enable efficient adaptation between the source and channel coding, we first approximate the E2E data and semantic distortions as functions of source coding rate and bit error ratio (BER) via logistic regression, where BER is further modeled as functions of signal-to-noise ratio (SNR) and channel coding rate. Then, we formulate the weighted sum E2E distortion minimization problem for joint source-channel coding rate and power allocation over parallel channels, which is solved by the successive convex approximation. Finally, simulation results demonstrate that the proposed ASCC scheme outperforms typical deep JSCC and SSCC schemes for both the single- and parallel-channel scenarios while maintaining full compatibility with practical digital systems.

This paper considers a multi-user semantic and data communication (MU-SemDaCom) system, where a base station (BS) simultaneously serves users with different semantic and data tasks through a downlink multi-user multiple-input single-output (MU-MISO) channel. The coexistence of heterogeneous communication tasks, diverse channel conditions, and the requirements for digital compatibility poses significant challenges to the efficient design of MU-SemDaCom systems. To address these issues, we propose a multi-user adaptive source-channel coding (MU-ASCC) framework that adaptively optimizes deep neural network (DNN)-based source coding, digital channel coding, and superposition broadcasting according to the channel conditions. First, we employ a data-regression method to approximate the end-to-end (E2E) semantic and data distortions, for which no closed-form expressions exist due to the complex coupling between DNN-based source coding and channel codes. The obtained logistic formulas decompose the E2E distortion as the addition of the source and channel distortion terms, in which the logistic parameter variations are task-dependent and jointly determined by both the DNN and channel parameters. Then, based on the derived formulas, we formulate a weighted-sum E2E distortion minimization problem that jointly optimizes the source-channel coding rates, power allocation, and beamforming vectors for both the data and semantic users. Finally, an alternating optimization (AO) framework is developed, where the adaptive rate optimization is solved using the subgradient descent method, while the joint power and beamforming is addressed via the uplink-downlink duality (UDD) technique. Simulation results demonstrate that, compared with the conventional separate source-channel coding (SSCC) and deep joint source-channel coding (DJSCC) schemes that are designed for a single task, the proposed MU-ASCC scheme achieves simultaneous improvements in both the data recovery and semantic task performance.

This paper proposes an adaptive source-channel coding (ASCC) scheme for point-to-point digital semantic communications over parallel Gaussian channels, where the deep neural network (DNN)-based semantic source coding and conventional digital channel coding are separately deployed and adaptively designed. To enable efficient adaptation between the source and channel coding, we first approximate the E2E data and semantic distortions as functions of source coding rate and bit error ratio (BER) via logistic regression, where BER is further modeled as functions of signal-to-noise ratio (SNR) and channel coding rate. Then, we formulate the weighted sum E2E distortion minimization problem for joint source-channel coding rate and power allocation over parallel channels, which is solved by the successive convex approximation. Finally, simulation results demonstrate that the proposed ASCC scheme outperforms typical separate and deep joint source-channel coding schemes while maintaining full compatibility with practical digital systems.

This two-part paper studies a point-to-point resonant beam communication (RBCom) system, where two separately deployed retroreflectors are adopted to generate the resonant beam between the transmitter and the receiver, and analyzes the transmission rate of the considered system under both the quasi-static and mobile scenarios. Part I of this paper focuses on the quasi-static scenario where the locations of the transmitter and the receiver are relatively fixed. Specifically, we propose a new information-bearing scheme which adopts a synchronization-based amplitude modulation method to mitigate the echo interference caused by the reflected resonant beam. With this scheme, we show that the quasi-static RBCom channel is equivalent to a Markov channel and can be further simplified as an amplitude-constrained additive white Gaussian noise channel. Moreover, we develop an algorithm that jointly employs the bisection and exhaustive search to maximize its capacity upper and lower bounds. Finally, numerical results validate our analysis. Part II of this paper discusses the performance of the RBCom system under the mobile scenario.

Semantic communications are expected to accomplish various semantic tasks with relatively less spectrum resource by exploiting the semantic feature of source data. To simultaneously serve both the data transmission and semantic tasks, joint data compression and semantic analysis has become a pivotal issue in semantic communications. This article proposes a deep separate source-channel coding (DSSCC) framework for the joint task and data-oriented semantic communications (JTD-SCs) and utilizes the variational autoencoder approach to solve the rate-distortion problem with semantic distortion. First, by analyzing the Bayesian model of the DSSCC framework, we derive a novel rate-distortion optimization problem via the Bayesian inference approach for general data distributions and semantic tasks. Next, for a typical application of joint image transmission and classification, we combine the variational autoencoder approach with a forward adaption scheme to effectively extract image features and adaptively learn the density information of the obtained features. Finally, an iterative training algorithm is proposed to tackle the overfitting issue of deep learning models. Simulation results reveal that the proposed scheme achieves better coding gain as well as data recovery and classification performance in most scenarios, compared to the classical compression schemes and the emerging deep joint source-channel schemes.

This two-part paper focuses on the system design and performance analysis for a point-to-point resonant beam communication (RBCom) system under both the quasi-static and mobile scenarios. Part I of this paper proposes a synchronization-based information transmission scheme and derives the capacity upper and lower bounds for the quasi-static channel case. In Part II, we address the mobile scenario, where the receiver is in relative motion to the transmitter, and derive a mobile RBCom channel model that jointly considers the Doppler effect, channel variation, and echo interference. With the obtained channel model, we prove that the channel gain of the mobile RBCom decreases as the number of transmitted frames increases, and thus show that the considered mobile RBCom terminates after the transmitter sends a certain number of frames without frequency compensation. By deriving an upper bound on the number of successfully transmitted frames, we formulate the throughput maximization problem for the considered mobile RBCom system, and solve it via a sequential parametric convex approximation (SPCA) method. Finally, simulation results validate the analysis of our proposed method in some typical scenarios.

This paper proposes a deep separate source-channel coding (DSSCC) scheme for the semantic-aware image transmission, where image is lossily compressed and transmitted to receiver for recovery and processing certain semantic tasks. To improve the compression efficiency, the forward adaption (FA) method is incorporated into the DSSCC scheme to capture the density information of compressed features as side information. For a typical application of image classification task, we derive a novel rate-distortion optimization problem by analyzing the Bayesian model of the FA-based DSSCC framework. Then, a variational autoencoder approach is proposed to effectively compress image for semantic-aware transmission by minimizing the proposed rate-distortion problem. Simulation results reveal that the proposed FA-based DSSCC scheme achieves better image recovery and classification performance in most scenarios, compared to the classical compression schemes and the emerging deep joint source-channel schemes.

Resonant beam communication (RBCom) is a promising technology to satisfy the need for high data rate mobile communication. In this paper, we present the system model of kilometer-level RBCom by analyzing the resonant beam in one complete reflection round. Then, we derive the channel capacity for the scenario that the receiver moves in a fixed direction at a constant velocity. Numerical and simulation results reveal that the channel capacity decreases dramatically after a certain duration due to the cumulative doppler shift.