Both Versatile Video Coding (VVC) and High Efficiency Video Coding (HEVC) introduce Group of Pictures (GOP) based temporal filter (GBTF) as a pre-filter to improve compression performance. While numerous efforts have been made to optimize GBTF, there is a limited amount of research that explicitly addresses why GBTF could improve compression performance. Additionally, most optimizations have focused on the design of the filter itself, rather than on how to better integrate it with other encoding tools. In this paper, we analyze the reasons behind the superior compression performance of GBTF. Subsequently, we introduce a Coding Tree Unit (CTU)-level adaptive quantization parameter allocation method joint with GBTF to further enhance compression performance for video coding. The experimental results demonstrate that, for VVC, our method provides Bjontegaard delta bit rate (BD-BR) savings of 2.0% for Peak Signal-to-Noise Ratio (PSNR) and 4.0% for Structural Similarity index (SSIM). Furthermore, for HEVC, our method provides BD-BR savings of 3.5% for PSNR and 7.6% for SSIM.

Versatile Video Coding (VVC) introduces more coding tools to improve compression efficiency compared to its predecessor High Efficiency Video Coding (HEVC). For inter-frame coding, Fractional Motion Estimation (FME) still has a high computational effort, which limits the real-time processing capability of the video encoder. In this context, this paper proposes an error-surface-based FME algorithm and the corresponding hardware implementation. The algorithm creates an error surface constructed by the Rate-Distortion (R-D) cost of the integer motion vector (IMV) and its neighbors. This method requires no iteration and interpolation, thus reducing the area and power consumption and increasing the throughput of the hardware. The experimental results show that the corresponding BDBR loss is only 0.47% compared to VTM 16.0 in LD-P configuration. The hardware implementation was synthesized using GF 28nm process. It can support 13 different sizes of CU varying from$128\times 128$to$8\times 8$. The measured throughput can reach 4K@30fps at$400\mathbf{MHz}$, with a gate count of 192k and power consumption of 12.64 mW. And the throughput can reach 8K@30fps at 631MHz when only quadtree is searched. To the best of our knowledge, this work is the first hardware architecture for VVC FME with an interpolation-free strategy.

The latest Versatile Video Coding (VVC) standard incorporates a series of effective and complex new intra coding tools, which obtains superior coding efficiency than the High Efficiency Video Coding (HEVC). However, this makes the intra coding more complicated and time-consuming. A fast algorithm for VVC from two aspects of fast mode decision and fast partition decision is proposed in this paper. For the fast mode decision, the relationship between bins with Histogram of Oriented Gradient (HOG) and intra modes is created for the mode selection, decreasing the planar modes for SATD and RDO. Moreover, we analyze the maximum bins to determine the final modes, and we use the modes of left and upper blocks as a reference for the current CU, which can early terminate RDO. Moreover, a two-step fast partition algorithm is proposed based on HOG for fast partition decision, in which two thresholds are investigated to control the uniformity of textures. The proposed fast algorithm is implemented on the VVC test model, and the experimental results show that it can achieve 69.07% time savings with only 2.96% BDBR increases averagely, which outperforms other relatively existing state-of-the-art methods. Moreover, to convince the universality of our algorithm, we further implement our method in Fraunhofer Versatile Video Encoder (VVenc) and Fraunhofer Versatile Video Decoder (VVdec), which have five settings to control the trade-off between encoding quality and efficiency for intra coding. The fast intra mode decision algorithm and fast partition algorithm decrease the complexity of intra coding for both VTM and VVenc, which shows the efficiency and universality of the proposed fast partition and fast mode decision algorithms.

In this paper, we propose a learned video codec with a residual prediction network (RP-Net) and a feature-aided loop filter (LF-Net). For the RP-Net, we exploit the residual of previous multiple frames to further eliminate the redundancy of the current frame residual. For the LF-Net, the features from residual decoding network and the motion compensation network are used to aid the reconstruction quality. To reduce the complexity, a light ResNet structure is used as the backbone for both RP-Net and LF-Net. Experimental results illustrate that we can save about 10% BD-rate compared with previous learned video compression frameworks. Moreover, we can achieve faster coding speed due to the ResNet backbone.

Convolutional neural network (CNN)-based in-loop filtering have been very successful in video coding. For most existing works, however, a specific model was required for each quantization parameter (QP) band. In this paper, we introduce a generic method for helping CNN-filters deal with variable quantization noises. A feasible solution to this problem can be implemented on CNN by introducing a quantization step (Qstep) into the CNN. As the quantization noise changes, the CNN filter’s ability to suppress noise changes accordingly. The (vanilla) convolution layer can be replaced directly by this method in existing CNN filters. Compared with the VVenC anchor, only one CNN filter is used and achieves about 3.6% BD-rate reduction for the luminance component of random-access configuration. Also, about 0.8% BD-rate reduction has been achieved compared with the previous QP-map method.

Convolutional neural network (CNN)-based filters have achieved great success in video coding. However, in most previous works, individual models were needed for each quantization parameter (QP) band, which is impractical due to limited storage resources. To explore this, our work consists of two parts. First, we propose a frequency and spatial QP-adaptive mechanism (FSQAM), which can be directly applied to the (vanilla) convolution to help any CNN filter handle different quantization noise. From the frequency domain, a FQAM that introduces the quantization step (Qstep) into the convolution is proposed. When the quantization noise increases, the ability of the CNN filter to suppress noise improves. Moreover, SQAM is further designed to compensate for the FQAM from the spatial domain. Second, based on FSQAM, a QP-adaptive CNN filter called QA-Filter that can be used under a wide range of QP is proposed. By factorizing the mixed features to high-frequency and low-frequency parts with the pair of pooling and upsampling operations, the QA-Filter and FQAM can promote each other to obtain better performance. Compared to the H.266/VVC baseline, average 5.25% and 3.84% BD-rate reductions for luma are achieved by QA-Filter with default all-intra (AI) and random-access (RA) configurations, respectively. Additionally, an up to 9.16% BD-rate reduction is achieved on the luma of sequence BasketballDrill. Besides, FSQAM achieves measurably better BD-rate performance compared with the previous QP map method.

In this paper, a dual learning-based method in intra coding is introduced for PCS Grand Challenge. This method is mainly composed of two parts: intra prediction and reconstruction filtering. They use different network structures, the neural network-based intra prediction uses the full-connected network to predict the block while the neural network-based reconstruction filtering utilizes the convolutional networks. Different with the previous filtering works, we use a network with more powerful feature extraction capabilities in our reconstruction filtering network. And the filtering unit is the block-level so as to achieve a more accurate filtering compensation. To our best knowledge, among all the learning-based methods, this is the first attempt to combine two different networks in one application, and we achieve the state-of-the-art performance for AI configuration on the HEVC Test sequences. The experimental result shows that our method leads to significant BD-rate saving for provided 8 sequences compared to HM-16.20 baseline (average 10.24% and 3.57% bitrate reductions for all-intra and random-access coding, respectively). For HEVC test sequences, our model also achieved a 9.70% BD-rate saving compared to HM-16.20 baseline for all-intra configuration.