Diffuse optical imaging (DOI) offers valuable insights into scattering mediums, but the quest for high-resolution imaging often requires dense sampling strategies, leading to higher imaging errors and lengthy acquisition times. This work introduces Space-Time Encoded Modulation (STEM), a novel light modulation scheme enabling low-noise, high-resolution imaging with single-pixel detectors. In STEM, a laser illuminates the sample, and the transmitted light is detected using a single pixel detector. The detected image is partitioned into a two-dimensional array of sub-images, each encoded with a unique quasi-orthogonal code. These coded sub-images represent light transmission at specific locations along the sample boundary. A single-pixel detector then measures their combined transmission. By virtue of their quasi-orthogonality, the relative strength of each sub-image can be measured, enabling image formation. In this paper, we present a comprehensive mathematical description and experimental validation of the STEM method. Compared to traditional raster scanning, STEM significantly enhances imaging quality, reducing imaging errors by up to 60% and yielding a 3.5-fold increase in reconstruction contrast.

Optical wireless communication (OWC) systems provide many advantages over radio frequency (RF) wireless technologies in some scenarios, including significantly higher data rates and a large amount of available license-free frequency spectrum. Recently, OWC has also been proposed in fifth generation 5G standard as a tool to augment capacity due to RF spectrum crunching challenges. Various forms of OWC can be used to augment RF capacity at both access and backhaul/fronthaul levels. Despite the major advantages and various application areas, the widespread deployment of OWC is delayed by several challenges, such as the demand to maintain strict line-of-sight alignment between transmitter and receiver in long range outdoor applications; the need to combat attenuation due to adverse weather conditions such as fog, cloud, and turbulence; to modulate light emitting diodes at high frequencies without distortion at indoor visible light communication (VLC) applications and retaining power levels within the eye safety limits for laser transmitters and comfortable illumination levels for LED transmitters.

New data services and applications are emerging continuously and enhancing the mobile broadband experience. The ability to cope with these varied and sophisticated services and applications will be a key success factor for the highly demanding future network infrastructure. One such technology that could help address the problem would be optical wireless communications (OWC), which presents a growing research interest in the last few years for indoor and outdoor applications. This paper is an overview of the OWC systems focusing on visible light communications, free space optics, transcutaneous OWC, underwater OWC, and optical scattering communications.

We propose an adaptive transmission technique for free space optical (FSO) systems, operating in atmospheric turbulence and employing subcarrier phase shift keying (S-PSK) intensity modulation. Exploiting the constant envelope characteristics of S-PSK, the proposed technique offers efficient utilization of the FSO channel capacity by adapting the modulation order of S-PSK, according to the instantaneous state of turbulence induced fading and a pre-defined bit error rate (BER) requirement. Novel expressions for the spectral efficiency and average BER of the proposed adaptive FSO system are presented and performance investigations under various turbulence conditions, turbulence models, and target BER requirements are carried out. Numerical results indicate that significant spectral efficiency gains are offered without increasing the transmitted average optical power or sacrificing BER requirements, especially in moderate-to-strong turbulence conditions. Furthermore, the proposed variable rate transmission technique is applied to multiple input multiple output (MIMO) FSO systems, providing additional improvement in the achieved spectral efficiency as the number of the transmit and/or receive apertures increases.

We propose an adaptive transmission technique for optical wireless (OW) systems, operating in atmospheric turbulence and employing subcarrier phase shift keying (S-PSK) intensity modulation. Exploiting the constant envelope characteristics of S-PSK, the proposed technique offers efficient utilization of the OW channel capacity by adapting the modulation order of S-PSK, according to the instantaneous state of turbulence induced fading and a pre-defined bit error rate (BER) requirement. Novel expressions for the spectral efficiency and average BER of the proposed adaptive OW system are presented and performance investigations under various turbulence conditions and target BER requirements are carried out. Numerical results indicate that significant spectral efficiency gains are offered without increasing the transmitted average optical power or sacrificing BER requirements in moderate-to-strong turbulence conditions.

Over the last two decades, wireless communications has gained enormous popularity, offering attractive options for many personal and organizational communication needs due to major intrinsic characteristics such as flexibility, cost effectiveness, and mobility.

We propose an indoor wireless infrared downlink scheme for high-data-rate multiuser connectivity with diffuse channels. The scheme is based on synchronous code-division multiple access with unipolar Hadamard codes. The orthogonality of unipolar Hadamard codes enables multiuser operation with relatively short codes. Thus, practical downlink rates of tens of Mb/s for each user can be obtained. However, multipath reflections in diffuse channels cause strong multipath dispersion and, consequently, severe distortion. This distortion becomes even more severe in a multiuser environment, as the dispersed incoherent infrared radiation of all users aggregates together. To mitigate this distortion, we use a novel adaptive multilevel serial composite decision feedback and feedforward equalizer. We investigate the system's performance with the proposed equalizer, and compare it with the performance of the same system, both composite decision-feedback and feedforward equalizers, and with a conventional decision-feedback equalizer (DFE). Our results show that the proposed scheme enables a high-data-rate multiaccess link and eliminates most of the multiuser distortion. Furthermore, it improves system performance in a multiaccess environment, as compared with the other composite equalizers and DFE for the same complexity. We also compare other coding schemes, and show that Hadamard codes are on top of the other codes

Free-space optical communication between satellites networked together can enable a high data rate between the satellites. Coherence multiplexing (CM) is an attractive technique for satellite networking due to its ability to cope with the asynchronous nature of communication traffic and the dynamic changes taking place in the satellite constellation. The use of optical radiation for intersatellite links creates very narrow beam divergence angles. Due to the narrow beam divergence angle, the vibration of the pointing system, the movement of the satellite, and the large distance between them the pointing from one satellite to another is a complicated task. The vibration of the pointing system is caused by two stochastic fundamental mechanisms: 1) tracking noises created by the electrooptic tracker and 2) vibrations created by internal satellite mechanical mechanisms and external environments. We derive mathematical models of signal, noise, the approximate signal-to-noise ratio, and the approximate bit-error rates of optical communication satellite networks as functions of the system's parameters, the number of satellites, and the vibration amplitude for frequency-shift keying coherence multiplexing (FSK-CM). Based on these models, we can calculate the negative impact of both the number of satellites and the optical terminal vibration on the system's performance.

Urban optical wireless communication systems are considered a "last mile" technology. An optical wireless communication system uses the atmosphere as a propagation medium. In order to provide line-of-sight (LOS), the transceivers are placed on high-rise buildings. However, dynamic wind loads, thermal expansion, and weak earthquakes cause buildings to sway. These sways require the designer to increase the transmitter beam divergence angle so as to maintain LOS between the transmitter and the receiver. It is clear that an overly wide divergence angle increases the required laser power, and, as a result, terminal cost and complexity increase. On the other hand, an overly narrow beam divergence angle may result in cutoff in communication when there is building sway. In this paper, we derive a mathematical model to minimize transmitter power and optimize transmitter gain (divergence angle) as a function of the building-sway statistics, the communication system parameters, and the required bit-error probability (BEP). Reduction in laser power could improve overall system performances and cost. For example, for BEP of 10/sup -9/, we can attain at least a 4-dB reduction of the required transmitter power in comparison to a system with both half and twice the optimum beam divergence angle.

A number of serious consortiums develop satellite communication networks. The objective of these communication projects is to service personal communication users almost everywhere on Earth. The intersatellite links in those projects use microwave radiation as the carrier. Free-space optical communication between satellites networked together can make possible high-speed communication between different places on Earth. Some advantages of an optical communication system over a microwave communication system in free space are: (1) smaller size and weight, (2) less transmitter power, (3) larger bandwidth, and (4) higher immunity to interference. The pointing from one satellite to another is a complicated problem due to the large distance between the satellite, the narrow beam divergence angle, and vibration of the pointing system. Such vibration of the transmitted beam in the receiver plane decreases the average received signal, which increases the bit error rate. We review: (1) the present status of satellite networks, (2) developing efforts of optical satellite communication around the world, (3) performance results of vibration effects on different kinds of optical communication satellite networks, and (4) seven approaches to overcome the problems caused by transmitter pointing vibration.