On-chip power-management techniques have evolved over several processor generations. However, response time and scalability constraints have made it difficult to translate existing power-management strategies to current or next-generation System-on-Chip (SoC) architectures, which are expected to comprise tens to hundreds of cores and accelerators. In this work we present BlitzCoin, a fully decentralized hardware power-management strategy for large, accelerator-rich SoCs, coupled with optimized unified voltage and frequency regulation. We evaluated BlitzCoin through RTL simulations of multiple SoCs targeted toward different application domains. The results are further validated through silicon measurements of a fabricated 12 nm many-accelerator SoC that includes BlitzCoin. Our evaluations show that BlitzCoin is markedly faster, with 8× to 12× lower response times, which provides 25%-34% throughput improvement and allows for scaling to 7 × to 13 × larger SoCs compared to state-of-the-art centralized power-management strategies, all with an area overhead of <1%.

We present a scalable methodology for the agile physical design of tile-based heterogeneous system-on-chip (SoC) architectures that simplifies the reuse and integration of open-source hardware components. The methodology leverages the regularity of the on-chip communication infrastructure, which is based on a multi-plane network-on-chip (NoC), and the modularity of socket interfaces, which connect the tiles to the NoC. Each socket also provides its tile with a set of platform services, including independent clocking and voltage control. As a result, the physical design of each tile can be decoupled from its location in the top-level floorplan of the SoC and the overall SoC design can benefit from a hierarchical timing-closure flow, design reuse and, if necessary, fast respin. With the proposed methodology we completed two SoC tapeouts of increasing complexity, which illustrate its capabilities and the resulting gains in terms of design productivity.

Low voltage architecture and design are key enablers of high throughput per watt in heterogeneous, accelerator-rich many-core designs. However, such low voltage operation poses significant challenges because of difficulties in achieving reliable functionality of on-chip memories, particularly SRAMs at these design points. In this paper, we present a technique of low-voltage neural network acceleration, where the embedded SRAM architecture is equipped with a novel application-aware supply voltage boosting capability. This technique mitigates low-voltage induced failures, while enabling Very low voltage (VLV)1operation during most of the application run, resulting in substantial improvement in net energy efficiency. We present a framework to evaluate the impact of low-voltage SRAM errors on machine learning applications and characterize trade-offs between output inference accuracy and energy efficiency in our application-programmable supply boosted SRAM architecture. Using the proposed technique we push the limits on the minimum operable voltage (Vmin) for the desired output quality. As a proof of concept, we demonstrate these techniques on Dante, a Deep Neural Network (DNN) accelerator chip taped out in state-of-the art 14nm technology.

This paper is a tutorial-style introduction to a special session on: Effective Voltage Scaling in the Late CMOS Era. It covers the fundamental challenges and associated solution strategies in pursuing very low voltage (VLV) designs. We discuss the performance and system reliability constraints that are key impediments to VLV. The associated trade-offs across power, performance and reliability are helpful in inferring the optimal operational voltage-frequency point. This work was performed under the auspices of an ongoing DARPA program (named PERFECT) that is focused on maximizing system-level energy efficiency.

This paper presents a new design for SoC clocking based on open-loop frequency multiplication. The architecture, fully implemented in 28nm FD-SOI standard cells, achieves frequency tracking within one input reference period making it a promising candidate for Dynamic Voltage and Frequency Scaling (DVFS) schemes. A calibration scheme is implemented for wide voltage range (0.6-1.2V) operation and to offset P&R and variability induced mismatch. Measurements at 0.6V (0.8/0.4V FBB) show a Fmax of 93MHz with a power of 2.91mW/MHz and a jitter of 2.7 % UI.