This paper proposes a beamforming method under a per-antenna power constraint (PAPC). Although many beamformer designs with the PAPC need to solve complex optimization problems, the proposed complete power reallocation (CPR) method can generate beamformers with excellent performance only with linear operations. CPR is designed to have a simple structure, making it highly flexible and practical. In this paper, three CPR variations considering algorithm convergence speed, sum-rate maximization, and robustness to the channel uncertainty are developed. Simulation results verify that CPR and its variations satisfy their design criteria, and, hence, CPR can be readily utilized for various purposes.

This paper focuses on channel prediction techniques for massive multiple-input multiple-output (MIMO) systems. Previous channel predictors are based on theoretical channel models, which would be deviated from realistic channels. In this paper, we develop and compare a vector Kalman filter (VKF)-based channel predictor and a machine learning (ML)-based channel predictor using the realistic channels from the spatial channel model (SCM), which has been adopted in the 3GPP standard for years. First, we propose a low-complexity mobility estimator based on the spatial average using a large number of antennas in massive MIMO. The mobility estimate can be used to determine the complexity order of developed predictors. The VKF-based channel predictor developed in this paper exploits the autoregressive (AR) parameters estimated from the SCM channels based on the Yule-Walker equations. Then, the ML-based channel predictor using the linear minimum mean square error (LMMSE)-based noise pre-processed data is developed. Numerical results reveal that both channel predictors have substantial gain over the outdated channel in terms of the channel prediction accuracy and data rate. The ML-based predictor has larger overall computational complexity than the VKF-based predictor, but once trained, the operational complexity of ML-based predictor becomes smaller than that of VKF-based predictor.

To get channel state information (CSI) at a base station (BS), most of researches on massive multiple-input multiple-output (MIMO) systems consider time division duplexing (TDD) to get benefit from the uplink and downlink channel reciprocity. Even in TDD, however, the BS still needs to transmit downlink training signals, which are referred to as channel state information reference signals (CSI-RSs) in the 3GPP standard, to support spatial multiplexing in practice. This is because there are many cases that the number of transmit antennas is less than the number of receive antennas at a user equipment (UE) due to power consumption and circuit complexity issues. Because of this mismatch, uplink sounding reference signals (SRSs) from the UE are not enough for the BS to obtain full downlink MIMO CSI. Therefore, after receiving the downlink CSI-RSs, the UE needs to feedback quantized CSI to the BS using a pre-defined codebook to support spatial multiplexing. In this paper, possible approaches to reconstruct full downlink MIMO CSI at the BS are proposed by exploiting both the SRS and quantized downlink CSI considering practical antenna structures with reduced downlink CSI-RS overhead. Numerical results show that the spectral efficiencies by spatial multiplexing based on the proposed downlink MIMO CSI reconstruction techniques outperform the conventional methods solely based on the quantized CSI.

In this paper, we propose an optimal source power allocation scheme for a two-hop amplify-and-forward relaying network with cooperative jamming where a source and destination transmit jamming signals. For the full CSI of all link and the CSI for desired link, the source power is optimally splitted to minimize the secrecy outage probability. Simulation results show that the proposed power allocation scheme improves the secrecy rate and reliability.