Due to the requirements of the Internet-of-Things, modern embedded systems have become increasingly complex, running different applications. In order to protect their intellectual property as well as the confidentiality of sensitive data they process, these applications have to be isolated from each other. Traditional memory protection and memory management units provide such isolation, but rely on operating system support for their configuration. However, modern operating systems tend to be vulnerable and cannot guarantee confidentiality when compromised. We present Atlas, a hardware-based security architecture, complementary to traditional memory protection mechanisms, ensuring code and data confidentiality through transparent encryption, even when the system software has been exploited. Atlas relies on its zero-software trusted computing base to protect against system-level attackers and also supports secure shared memory. We implemented Atlas based on the LEON3 softcore processor, including toolchain extensions for developers. Our FPGA-based evaluation shows minimal cycle overhead at the cost of a reduced maximum frequency.

Attackers target many different types of computer systems in use today, exploiting software vulnerabilities to take over the device and make it act maliciously. Reports of numerous attacks have been published, against the constrained embedded devices of the Internet of Things, mobile devices like smartphones and tablets, high-performance desktop and server environments, as well as complex industrial control systems. Trusted computing architectures give users and remote parties like software vendors guarantees about the behaviour of the software they run, protecting them against software-level attackers. This paper defines the security properties offered by them, and presents detailed descriptions of twelve hardware-based attestation and isolation architectures from academia and industry. We compare all twelve designs with respect to the security properties and architectural features they offer. The presented architectures have been designed for a wide range of devices, supporting different security properties.

Weak security, excessive personal data collection for user profiling, and a poor user experience are just a few of the many problems that mobile authentication solutions suffer from. Despite being an interesting platform, mobile devices are still not being used to their full potential for authentication. n-Auth is a firm step in unlocking the full potential of mobile devices in authentication, by improving both security and usability whilst respecting the privacy of the user. Our focus is on the combined usage of several strong cryptographic techniques with secure HCI design principles to achieve a better user experience. We specified and built n-Auth, for which robust Android and iOS apps are openly available through the official stores.

An increasing number of applications implemented on a SoC (System-on-chip) require security features. This work addresses the issue of protecting the integrity of code and read-only data that is stored in memory. To this end, we propose a new architecture called SCM, which works as a standalone IP core in a SoC. To the best of our knowledge, there exists no architectural elements similar to SCM that offer the same strict security guarantees while, at the same time, not requiring any modifications to other IP cores in its SoC design. In addition, SCM has the flexibility to select the parts of the software to be protected, which eases the integration of our solution with existing software. The evaluation of SCM was done on the Zynq platform which features an ARM processor and an FPGA. The design was evaluated by executing a number of different benchmarks from memory protected by SCM, and we found that it introduces minimal overhead to the system.

The Sancus security architecture for networked embedded devices was proposed in 2013 at the USENIX Security conference. It supports remote (even third-party) software installation on devices while maintaining strong security guarantees. More specifically, Sancus can remotely attest to a software provider that a specific software module is running uncompromised and can provide a secure communication channel between software modules and software providers. Software modules can securely maintain local state and can securely interact with other software modules that they choose to trust. Over the past three years, significant experience has been gained with applications of Sancus, and several extensions of the architecture have been investigated—both by the original designers as well as by independent researchers. Informed by these additional research results, this journal version of the Sancus paper describes an improved design and implementation, supporting additional security guarantees (such as confidential deployment) and a more efficient cryptographic core. We describe the design of Sancus 2.0 (without relying on any prior knowledge of Sancus) and develop and evaluate a prototype FPGA implementation. The prototype extends an MSP430 processor with hardware support for the memory access control and cryptographic functionality required to run Sancus. We report on our experience using Sancus in a variety of application scenarios and discuss some important avenues of ongoing and future work.

A Virtual Private Network (VPN) encrypts and decrypts the private traffic it tunnels over a public network. Maximizing the available bandwidth is an important requirement for network applications, but the cryptographic operations add significant computational load to VPN applications, limiting the network throughput. This work presents a coprocessor designed to offer hardware acceleration for these encryption and decryption operations. The open-source SigmaVPN application is used as the base solution, and a coprocessor is designed for the parts of Networking and Cryptography library (NaCl) which underlies the cryptographic operation of SigmaVPN. The hardware-software codesign of this work is implemented on a Xilinx Zynq-7000 SoC, showing a 93% reduction in the execution time of encrypting a 1024-byte frame, and this improved the TCP and UDP communication bandwidths by a factor of 4.36 and 5.36 respectively compared to pure software solution for a 1024-byte frame.

Protecting the intellectual property of software that is distributed to third-party devices which are not under full control of the software author is difficult to achieve on commodity hardware today. Modern techniques of reverse engineering such as static and dynamic program analysis with system privileges are increasingly powerful, and despite possibilities of encryption, software eventually needs to be processed in clear by the CPU. To anyhow be able to protect software on these devices, a small part of the hardware must be considered trusted. In the past, general purpose trusted computing bases added to desktop computers resulted in costly and rather heavyweight solutions. In contrast, we present Soteria, a lightweight solution for low-cost embedded systems. At its heart, Soteria is a program-counter based memory access control extension for the TI MSP430 microprocessor. Based on our open implementation of Soteria as an openMSP430 extension, and our FPGA-based evaluation, we show that the proposed solution has a minimal performance, size and cost overhead while effectively protecting the confidentiality and integrity of an application's code against all kinds of software attacks including attacks from the system level.