Sled-based side-looking C-band radar profiles were collected around Fairbanks, Alaska, in March 2023 during the NASA SnowEx campaign to improve the conceptual understanding of C-band radar wave interactions with snow in a boreal forest environment. Seven transects with different vegetation and ground conditions were studied. Significant volume scattering from snow was observed in this shallow snowpack, indicating sensitivity at lower snow depths (SDs) which are common in high-latitude snowpacks. Manual removal of the snowpack decreased the backscatter by more than 2 dB in all polarizations, with a larger decrease in the cross-polarization, supporting the potential use of Sentinel-1 to retrieve SD.

To better understand the interactions of satellite C-band radar with the soil-snow-vegetation continuum in a spatio-temporal context and to provide a novel approach for snow depth retrieval from Sentinel-1 observations, a coupled radiative transfer model was developed. This model combines a snow, soil and vegetation radiative transfer model to simulate the Sentinel-1 observations over the Alps, and can be inversed to obtain estimates of snow depth. Performance will be assessed at 1 km spatial resolution for the winter of 2017-2018, across a wide range of elevations, local incidence angles and total accumulated snow, using several performance measures (Pearson correlation and MAE).

Between 2018 and 2022, INRAE Bordeaux (IB) has developed a series of soil moisture (SM) and L-band Vegetation Optical depth (L-VOD) retrieval products from SMOS and SMAP, which are currently the only two operational L-band passive microwave satellite missions. These IB products rely on a two-parameter inversion of the L-MEB model (L-band Microwave Emission of the Biosphere) which requires little ancillary information. The products are found to be accurate, and very well-suited for application in hydrology, agriculture, climate and vegetation monitoring. In this communication, we present an overview of the development, evaluation and new applications of these IB SM or L-VOD products.

Recent applications of passive L-band observations from space are summarized for ocean, land surface and cryosphere applications. The main limitation of the measurements performed by the current generation of sensors is the spatial resolution. The need of a mission ensuring the continuation of L-band measurements from space with high spatial resolution (10-15 km) is discussed.

Recent research has shown the sensitivity of Sentinel-1 C-band (5.4 GHz) radar data to snow depth. This finding could potentially help fill a long standing gap in remote sensing, but the physical basis behind this sensitivity is not yet sufficiently understood. A field experiment was set-up at two sites in the US Rocky Mountains in Idaho to study the polarimetric radar response, continuously throughout multiple winter seasons. This paper describes the design and properties of the tower-based, fully polarimetric, C-band radar system and presents the first findings. Hourly measurements were made during the winters of 2019–2020 and 2020–2021 at two different sites in Idaho. When studying the time domain responses, the scattering from the snow volume, the ground surface and multiple bounces can be discerned.

Sentinel-1 backscatter observations were assimilated into the Global Land Evaporation Amsterdam Model (GLEAM) using an ensemble Kalman filter. As a forward operator, which is required to simulate backscatter from soil moisture and leaf area index (LAI), we evaluated both the traditional water cloud model (WCM) and the support vector regression (SVR). With SVR, a closer fit between backscatter observations and simulations was achieved. The impact on the correlation between modeled andin situsoil moisture measurements was similar when assimilating the Sentinel data using WCM ($\Delta R = +0.037$) or SVR ($\Delta R = +0.025$).

Passive microwave remote sensing observations at L-band provide key and global information on surface soil moisture (SM) and vegetation optical depth (VOD), which are related to the Earth water and carbon cycles. Only two spaceborne L-band sensors are currently operating: SMOS, launched end of 2009 and thus providing now a 11-year global dataset and SMAP, launched beginning of 2015. To ensure SM and L-VOD data continuity in the event of failure of one of the space-borne SMOS or SMAP sensors, we developed a consistent brightness temperature (TB) record by first producing consistent 40° SMOS and SMAP TB estimates based on SMOS-IC and SMAP enhanced data resp., and then fusing them via linear fusion method. We found that SMOS and SMAP TB are strongly correlated (R > 0.90 over most of the globe) but present a small bias at both the horizontal and vertical polarizations. The preliminary evaluation results show that this bias can be adjusted using a linear fit, but further evaluation procedures are still needed. In the near future, we will develop a long-term time series of SM and L-VOD products based on this merged SMOS-SMAP TB record.

Seasonal snow is an essential source of water, especially in mountain regions. However, accurate satellite observations of the amount of snow stored in mountains are still lacking. We provide estimates of snow depth at sub-kilometer resolution over the European Alps for 2017–2019 from Sentinel-1 observations. The retrievals are based on a change detection algorithm that includes the masking of wet snow. For dry snow conditions, 300-m Sentinel-1 retrievals have a spatiotemporal correlation of 0.82 and mean absolute error of 0.19m compared with in situ measurements from 743 sites across the Alps. The results show the potential of Sentinel-1 to provide unprecedented snow estimates in regions with complex topography, where satellite observations of snow mass are currently lacking.

The current intensive use of agricultural land forces a shift to more sustainable methods of crop production. Future crop demands are expected to rise due to a strong increase in population and prosperity, and the uncertainty in crop yields is expected to increase because of changing climatic conditions. Agricultural systems need not only be evaluated at the field scale, but a regional perspective is required to inform policy makers. Therefore, a regional version of the point-based AquaCrop model v6.1 is presented. The system shows a good performance compared to various satellite retrieval products of biomass and soil moisture. When coupling AquaCrop output with a Water Cloud Model, the model biomass and soil moisture output will be further compared against Sentinel-1 CSAR backscatter.

Passive microwave L-band remote sensing is well known for its sensitivity to surface soil moisture over land. The signal is also affected by other dynamic variables such as vegetation and soil salinity. In this research, L-band microwave observations of the Soil Moisture Ocean Salinity (SMOS) mission are used to explore soil surface salinity, moisture and vegetation, in the Argentinean Dry Chaco, an area with possible emerging dryland salinity. A Radiative Transfer Model (RTM) with inclusion of a correction to the soil's dielectric constant for salinity was used in forward and inverse mode, using either in situ data or Catchment Land Surface Model (CLSM) simulations as RTM input. The forward analysis pointed out shortcomings in the modeled soil moisture and soil surface temperature estimates. The impact of salinity on forward simulations over the Dry Chaco was limited. The RTM inversion using 10 years of SMOS brightness temperature observations resulted in realistic estimates of vegetation and roughness, both with and without optimizing a correction term for the dielectric constant in terms of salinity equivalents. However, the retrieval of the correction term to the dielectric constant was very uncertain and not representative of soil surface salinity, but rather of open water, texture uncertainty or soil moisture bias.

Data assimilation (DA) techniques provide the means to integrate observational information into dynamical models. The success of such methods requires accurate knowledge of model and observation uncertainties, which are seldom available. Adaptive DA techniques estimate these uncertainties as part of the system. In this study, we apply the recently developed Monte Carlo based adaptive Kalman Filter (MadKF) to assimilate SMOS brightness temperature (Tb) measurements into the Catchment Land Surface Model for soil moisture state updating. The MadKF yields robust Tb uncertainty estimates and significant skill improvements relative to model-only soil moisture estimates, when evaluated with in situ measurements.

Global, 3-hourly, 9-km resolution soil moisture estimates are available with a mean latency of ~2.5 days from the NASA Soil Moisture Active Passive (SMAP) mission Level-4 Soil Moisture (L4_SM) product. These estimates are based on the assimilation of SMAP radiometer brightness temperature (Tb) observations into the NASA Catchment land surface model using a spatially distributed ensemble Kalman filter. Routine monitoring of the L4_SM system's assimilation diagnostics revealed occasionally large observation-minus-forecast Tb differences across eastern central Australia that resulted in large analysis increments (or adjustments) of the model forecast soil moisture. Because this region lacks in situ soil moisture measurements, we developed an alternative approach to assess the veracity of the soil moisture analysis increments in the L4_SM system. Using regional gauge-based precipitation data, we demonstrate that the L4_SM soil moisture increments are correlated with errors in the L4_SM precipitation forcing, suggesting that the SMAP Tb observations contribute valuable information to the L4_SM soil moisture estimates.

Hydrological change in peatlands due to anthropogenic disturbance and global warming can release enormous amounts of greenhouse gas emissions. Passive microwave satellite observations are an opportunity to globally monitor these changes. Abundant static and dynamic open water surfaces in peatlands strongly affect observed brightness temperatures (Tb). Here, we account for these contributions in radiative transfer modeling using NASA's Goddard Earth Observing System Model version 5 (GEOS-5) static open water mask and, for the dynamic open water fraction, the simulated inundated area using a version of the GEOS-5 Catchment land surface model that has been modified for peatland areas (PEAT-CLSM). Modeled Tb is compared against two years of SMAP L-band Tb. Preliminary results indicate: (i) a bias reduction when including the static open water fraction in a simple RTM mixing model, and ii) significantly improved correlation between modeled and observed Tb when using land surface output from PEAT-CLSM instead of the operational CLSM.

The first NASA SnowEx campaign was held in February 2017 over Grand Mesa, Colorado, covering both open and forested areas. The Belspo SNOPOST project aims at using the collected SnowEx data to enhance snow estimates using the Level 1 remote sensing data together with land surface modeling and to document the limitations of snow remote sensing where needed. A preliminary spatiotemporal analysis of in situ and satellite remote sensing data, and modeling estimates of snow will be presented.

In 2017, the new SMOS-IC retrieval product of soil moisture (SM) and L-band Vegetation Optical depth (L-VOD) was developed. This product relies on a two-parameter inversion of the L-MEB model (L-band Microwave Emission of the Biosphere) which requires little ancillary information and was found to be accurate, making it very well-suited for application in agriculture, hydrology, climate and vegetation monitoring. In this communication we present recent improvements in the SMOS-IC retrieval algorithm and recent applications using the soil moisture or VOD retrievals from the SMOS-IC data set. SMOS-IC SM is available at the French CATDS center.

With the launch of the Soil Moisture and Ocean Salinity (SMOS) mission in 2009 and the Soil Moisture Active-Passive (SMAP) mission in 2015, a wealth of L-band brightness temperature (Tb) observations has become available. In this letter, SMOS and SMAP Tbs are assimilated separately into the Community Land Model over the Murrumbidgee basin in south-east Australia from April 2015 to August 2017. To overcome the seasonal Tb observation-minus-forecast biases, Tb anomalies from the seasonal climatology are assimilated. The use of climatologies derived from either SMOS or SMAP observations using either 2 years or 7 years of data yields nearly identical results, highlighting the limited sensitivity to the climatology computation and their interchangeability. The temporal correlation between soil moisture data assimilation results and in situ observations is slightly improved for top-layer soil moisture (+0.04) and for root-zone soil moisture (+0.05). The soil moisture anomaly correlation improves moderately for the top-layer soil moisture (+0.15), with a smaller positive impact on the root zone (+0.05).

This study presents a new SMOS (Soil Moisture and Ocean Salinity) soil moisture (SM) product based on a different scattering albedo and soil roughness parameterization: the SMOS-IC (SMOS INRA-CESBIO) data set. In this study, several parameterizations of the vegetation and soil roughness parameters (ω, HRand NRP, P = H, V) were tested and the retrieved SM was compared against in situ observations obtained from the International Soil Moisture Network (ISMN). Firstly, values of ω = 0.10, HR= 0.4 and NRP= −1 (P = H, V) were found globally. Secondly, a calibration of these parameters was obtained for the different land cover categories of the International Geosphere-Biosphere Programme (IGBP) scheme. Depending on the IGBP land cover class, values of ω and HRvaried, respectively, in the ranges 0.08–0.12 and 0.1–0.5. The IGBP-based calibration is currently used in the SMOS-IC product algorithm. Using as reference the ISMN sites, a better performance of the SMOS-IC product over the operational SMOSL3 (SMOS level 3) SM product was found: R = 0.62, bias = −0.019 m3/m3, ubRMSE = 0.061 m3/m3 for SMOS-IC; against R = 0.54, bias = −0.037 m3/m3 and ubRMSE = 0.069 m3/m3 for SMOSL3.

In this study, we used a multilinear regression approach to retrieve surface soil moisture from NASA's Soil Moisture Active Passive (SMAP) satellite data to create a global dataset of surface soil moisture which is consistent with ESA's Soil Moisture and Ocean Salinity (SMOS) satellite retrieved surface soil moisture. This was achieved by calibrating coefficients of the regression model using SMOS soil moisture and horizontal and vertical brightness temperatures (TB), over the 2013 — 2014 period. Next, this model was applied to recent SMAP TB data from 31/03/2015–08/09/2015. The retrieved surface soil moisture from SMAP (referred here to as SMAP-reg) was compared to the operational SMAP L3 surface soil moisture retrieved using the single channel algorithm. Both exhibit comparable temporal dynamics with a good agreement of correlation (correlation coefficient R mostly > 0.8) between the SMAP-reg and the operational SMAP L3 surface soil moisture products.

This study focuses on the calibration of the effective scattering albedo (ω) of vegetation in the soil moisture (SM) retrieval at L-Band. Currently, in the SMOS Level 2 and 3 algorithms, the value of ω is set to 0 for low vegetation and ∼ 0.06 – 0.08 for forests. Different parameterizations of vegetation (in terms of ω values) were tested in this study. The possibility of combining soil roughness and vegetation contributions as a single parameter (“combined” method) leads to an important simplification in the algorithm and was also evaluated here. Following these assumptions, retrieved values of SMOS SM were compared with SM data measured over many in situ sites worldwide from the International Soil Moisture Network. These validation sites were classified using the International Geosphere-Biosphere Programme (IGBP) classification scheme. In situ SM measurements and SM retrievals were compared, and statistical scores were computed. The optimum albedo configuration was then found for each class of the IGBP landcover classification. Preliminary results yield values of albedo between 0.07 to 0.12 under the assumption of homogeneous pixels.

The SMAP Level 4 soil moisture (L4_SM) product provides global estimates of surface and root zone soil moisture, along with other land surface variables and their error estimates. These estimates are obtained through assimilation of SMAP brightness temperature observations into the Goddard Earth Observing System (GEOS-5) land surface model. The L4_SM product is provided at 9 km spatial and 3-hourly temporal resolution and with about 2.5 day latency. The soil moisture and temperature estimates in the L4_SM product are validated against in situ observations. The L4_SM product meets the required target uncertainty of 0.04 m3m-3, measured in terms of unbiased root-mean-square-error, for both surface and root zone soil moisture.

The Soil Moisture and Ocean Salinity (SMOS) and Soil Moisture Active Passive (SMAP) missions provide Level-1 brightness temperature (Tb) observations that are used for global soil moisture estimation. However, the nature of these Tb data differs: the SMOS Tb observations contain atmospheric and select reflected extraterrestrial (“Sky”) radiation, whereas the SMAP Tb data are corrected for these contributions, using auxiliary near-surface information. Furthermore, the SMOS Tb observations are multiangular, whereas the SMAP Tb is measured at 40° incidence angle only. This letter discusses how SMOS Tb, SMAP Tb, and radiative transfer modeling components can be aligned in order to enable a seamless exchange of SMOS and SMAP Tb data in soil moisture retrieval and assimilation systems. The aggregated contribution of the atmospheric and reflected Sky radiation is, on average, about 1 K for horizontally polarized Tb and 0.5 K for vertically polarized Tb at 40° incidence angle, but local and short-term values regularly exceed 5 K.

Performances of two global satellite-based surface soil moisture (SSM) retrievals with respect to model-based SSM derived from the MERRA (Modern-Era Retrospective analysis for Research and Applications) rea-nalysis were explored in this paper: (i) Soil Moisture and Ocean Salinity (SMOS; passive) Level-3 SSM (SMOSL3) and (ii) the Advanced Scatterometer (ASCAT; active) SSM. Temporal correlation was used to investigate the performance of SMOSL3 and ASCAT SSM products during the period 05/2010–2012 on a global basis. Both SMOSL3 and ASCAT (slightly better) captured well (R>0.70) the long-term variability of the modelled SSM, particularly, over the Indian subcontinent, the Great Plains of North America, and the Sahel. However, ASCAT had negative correlations in arid regions, in particular across the Sahara and the Arabian Peninsula. This may be due to complex scattering mechanisms over very dry surfaces. To explore the land cover dependence of the analyzed statistical indicators, the global correlation results were averaged per biome extracted from a global map of biomes. In general, SMOSL3 and ASCAT performances behaved differently from one biome to another. For SMOSL3, the highest average correlation was observed over “tropical semi-arid” (R = ∼ 0.5) and “temperate semi-arid” biomes, whereas for ASCAT, the highest correlations were observed over “tropical semi-arid” (R = ∼ 0.7) and “tropical humid” biomes. The poorest agreement for both SMOSL3 and ASCAT was generally found over “tundra” and “desert temperate” biomes, particularly for ASCAT. This study showed that the performance of both SMOSL3 and ASCAT is highly dependent on vegetation. We also showed that both of them provide complementary information on SSM, which implies a potential for data fusion which would be pertinent for the ESA climate change initiative (CCI).

Soil moisture is a critical state variable in land surface hydrology. Large-scale soil moisture mapping based on microwave remote sensing would be valuable in many different practical and theoretical applications, and a real potential exists for new space missions in the near future which well utilize simultaneous active/passive microwave measurements for global soil moisture retrieval. This paper discusses the experiment for the retrieval of soil moisture using radar and radiometric measurements. It was shown that combinations of simultaneous radar and radiometer data can enhance soil moisture retrievals, especially in the presence of dynamic vegetation.