With the proliferation of cloud computing, the exponential growth of data amount requires continuous expansion of storage capacity to meet the storage demand, consequently resulting in higher energy consumption in data centers. However, many of the conventional data placement strategies strive to save energy by optimizing the distribution of data requests, while overlooking the impact of heat recirculation among data nodes. To bridge this gap, we propose a heat-recirculation-aware data placement approach, termed HRADP, designed to optimize data placement in data centers while reducing energy consumption. First, based on the extent of heat recirculation, HRADP places data to the upper limit of the disk allowance for each data node. Second, during energy allocation, HRADP further eliminates disks with high current workloads to prevent localized hotspots. Finally, during request scheduling, HRADP selects dormant data nodes according to the request size, minimizing the startup energy consumption caused by data nodes waking up with small requests. We implement the HRADP approach on a data center simulation platform, CloudSim, and its performance with state-of-the-art, including the Energy-efficient and Thermal-aware Data Placement (ETDP) algorithm, Thermal-aware file assignment technique (TIGER), Storage and rack-sensitive replica placement algorithm (SRS), and Hadoop Distributed File System (HDFS). The experimental results reveal that HRADP revamps the cooling supply temperature, total energy, and data throughput by averages of 0.08%-0.6%, 8.22%-53.03%, and 9.58%-64.59%, respectively.

The parallel operation technology plays a pivotal role in enhancing performance of 3-D nand flash-based SSDs. High-parallel distribution of consecutive pages places the pages on different parallel units, thereby improving the parallelism and throughput of read requests. However, the high-parallel distribution generates two problems: 1) aggravating data fragmentation and 2) exacerbating the impact of garbage collection (GC) on latency. Moreover, small reads only require a few parallel units, and thus the high-parallel distribution is redundant for the requests. To address this issue, we propose a read-request driven adaptive allocation scheme called RDA to bolster SSD performance by adaptively adjusting the parallel distribution of consecutive pages. The RDA scheme employs the size of historical read requests to gauge the level of parallelism for write requests with varying sizes. Then, RDA allocates the logical pages of writes to distinct parallel units according to the parallelism of the requests. In doing so, RDA effectively mitigates the performance degradation of SSDs caused by redundant parallel distribution, while preserving the parallelism of read requests. We compare RDA with the three state-of-art schemes Amphibian, SOML, and Preemptive GC in terms of GC-blocked read requests, GC counts, and read response time under eight real-world workloads. The experimental results unveil that compared with the existing schemes, RDA revamps the GC-blocked read requests, GC counts, and read response time by averages of 20.6%, 7.8%, and 15.8%, respectively.

The reduction of energy consumption will be even more urgent in cloud data centers due to the explosive increase of application data. Virtual machine (VM) integration is a relatively standard technology currently applied for computing facilities of data centers. However, excessive VM consolidation can easily lead to local hot spots that lower the energy efficiency and reliability of data centers. In addition, on account of the impact of heat recirculation in data centers, the traditional VM scheduling strategy cannot comprehensively ponder optimizing the holistic data center energy, which encompasses both server energy and cooling energy. To handle these issues, we proposedEAVMS- an Energy-Aware VM Scheduling approach for minimizing the holistic energy consumption of data centers. EAVMS adopts a two-phase approach to gain energy efficiency while guaranteeing QoS. First, EAVMS leverages a Blended Genetic algorithm and Simulated Annealing algorithm (BGSA) to optimize the initial placement of VMs. Second, EAVMS utilizes a dynamic migration algorithm to achieve effective migration by setting a maximum server temperature threshold without violating the service level agreement (SLA) that cuts down energy consumption by moderating the hot spots of servers. We conducted extensive experiments using two real-world traces (i.e., PlanetLab and Google Cluster datasets) to evaluate the effectiveness of EAVMS. The experimental results unveil that our approach is capable of saving 3.23$ \%$–43.07$ \%$in the holistic energy consumption of cloud data centers with only a tiny service performance degradation compared to other state-of-the-art alternatives (e.g., MJPM, GRANITE, TAS, XINT-GA, and Random).

Escalating host temperatures in data centers can create hot spots, significantly boosting cooling costs and impacting reliability. Accurately predicting host temperatures is of the utmost importance in managing resources effectively. Existing temperature estimation solutions are inefficient due to a lack of accurate prediction. To this end, we proposed a deep learning-based thermal prediction approach called DLTPA, which aims to minimize the temperature and power consumption of virtual machines (VMs) in data centers. Specifically, we built a Long Short-Term Memory (LSTM) network model to accurately predict host temperature and power consumption, demonstrating superior performance over traditional algorithms. Our LSTM model exhibits exceptional accuracy in predicting thermal and energy dynamics, achieving an R2value of 0.98 in power consumption prediction, indicating exact forecasts. Furthermore, we design an efficient VM placement strategy to achieve host peak temperature reduction by rationally arranging VM tasks. The experimental results demonstrate that the DLTPA significantly improves over other leading-edge algorithms. It reduces peak power consumption by 3.64% to 9.39%, lowers average temperature by 3.21% to 7.96%, achieves a 0% SLA violation rate, and maintains a high level of load balancing at 19.8%.

With the rise of cloud computing and artificial intelligence, the resource utilization rate of data centers is soaring, resulting in significant power consumption and electricity costs. Traditional inappropriate resource placement methods cannot match the local electricity pricing form well, leading to data centers consuming a large amount of energy and requiring large electricity bills. In this paper, firstly, this paper study a global electricity-cost-minimization model, which takes into account both IT and non-IT resource usage. Secondly, We introduce a two-step algorithm (SAT-GAV) to solve the NP-hard TVMP problem. The first step of SAT-GAV uses the simulated annealing algorithm to arrange task placements to reduce electricity costs. In the second step, we uses the greedy algorithm to place virtual machines by leveraging of minimizing data center electricity costs. We conduct extensive experiments to evaluate the effectiveness of SAT-GAV. And compare the performance of our SAT-GAV with other state-of-art algorithms. Experimental results indicate that, compared to other algorithms, our VMP strategy can reduce the electricity costs by 8.9% compared to the best-performing PDGA algorithm and by 33.34% compared to the earlier XINT-GA algorithm.

With high scalability and flexibility, serverless computing is becoming the most promising computing model. Existing serverless computing platforms initiate a container for each function invocation, which leads to a huge waste of computing resources. Our examinations reveal that (i) executing invocations concurrently within a single container can provide comparable performance to that provided by multiple containers (i.e., traditional approaches); (ii) redundant resources generated within a container result in memory resource waste, which prolongs the execution time of function invocations. Motivated by these insightful observations, we propose FaaSBatch - a serverless framework that reduces invocation latency and saves scarce computing resources. In particular, FaaSBatch first classifies concurrent function requests into different function groups according to the invocation information. Next, FaaSBatch batches the invocations of each group, aiming to minimize resource utilization. Then, FaaSBatch utilizes an inline parallel policy to map each group of batched invocations into a single container. Finally, FaaSBatch expands and executes invocations of containers in parallel. To further reduce invocation latency and resource utilization, within each container, FaaSBatch reuses redundant resources created during function execution. We conduct extensive experiments based on Azure traces to evaluate the effectiveness and performance of FaaSBatch. We compare FaaSBatch with three state-of-the-art schedulers Vanilla, SFS, and Kraken. Our experimental results show that FaaSBatch effectively and remarkably slashes invocation latency and resource overhead. For instance, when executing I/O functions, FaaSBatch cuts back the invocation latency of Vanilla, SFS, and Kraken by up to 72.58%, 74.10%, and 72.62%, respectively; FaaSBatch also slashes the resource overhead of Vanilla, SFS, and Kraken by 70.2% to 98.40%, 67.74% to 98.12%, and 43.01% to 78.90%, respectively.

With the rapid growth of cloud computing, frequent workload bursts show an increasing influence on the Quality of Service (QoS) and energy efficiency of cloud-based data centers. Existing virtual machine placement schemes are expected to optimize either QoS or energy efficiency for cloud data centers running under bursty workload conditions. To bridge this gap, we propose a burst-aware and thermal-efficient virtual machine placement technique calledBTVMP. BTVMP adopts a two-step strategy to achieve energy efficiency while assuring QoS. First, BTVMP leverages a split-and-recombine algorithm – SAR – to deal with bursty workloads. SAR prioritizes critical workloads while preventing low-priority workloads from starvation, thereby assuring QoS. Second, BTVMP utilizes an enhanced simulated annealing algorithm calledESAto offer optimal thermal-efficient virtual machine placement (VMP) solutions, aiming to minimize the energy consumption of data centers. To facilitate estimating energy consumption, we integrate into BTVMP a thermal model that takes into account heat re-circulation effects. We conduct extensive experiments with a real-world trace. We compare BTVMP with the leading-edge VMP strategies, including Genetic Algorithm (XINT-GA), Power-Aware and Performance-Guaranteed Virtual Machine Placement (PPVMP), Peak Load Scheduling Control Method (PLSC), First Come First Serve (FCFS), and GReedy based scheduling Algorithm miNImizing Total Energy (GRANITE). The experimental results unveil that BTVMP not only enhances QoS but also exhibits superb energy efficiency. In particular, BTVMP reduces PLSC's workload delay and FCFS's critical workload delay by 18$\%$and 11$\%$, respectively. Moreover, BTVMP lowers the total energy consumption of the three alternative algorithms –GRANITE, XINTGA, PPVMP, and PLSC – by anywhere between 27.8$\%$and 49.4$\%$.

The explosion of large-scale data has increased the scale and capacity of storage clusters in data centers, leading to huge power consumption issues. Cloud providers can effectively promote the energy efficiency of data centers by employing energy-aware data placement techniques, which primarily encompass storage cluster's power and cooling power. Traditional data placement approaches do not diminish the overall power consumption of the data center due to the heat recirculation effect between storage nodes. To fill this gap, we build an elaborate thermal-aware data center model. Then we propose two energy-efficient thermal-aware data placement strategies, ETDP-I and ETDP-II, to reduce the overall power consumption of the data center. The principle of our proposed algorithm is to utilize a greedy algorithm to calculate the optimal disk sequence at the minimum total power of the data center and then place the data into the optimal disk sequence. We implement these two strategies in a cloud computing simulation platform based on CloudSim. Experimental results unveil that ETDA-I and ETDP-II outperform MinTin-G and MinTout-G in terms of the supplied temperature of CRAC, storage nodes power, cooling cost, and total power consumption of the data center. In particular, ETDP-I and ETDP-II algorithms can save about 9.46%-38.93% of the overall power consumption compared to MinTout-G and MinTin-G algorithms.

With high scalability and flexibility, serverless computing is becoming the most promising computing model. Existing serverless computing platforms initiate a container for each function invocation, which leads to a huge waste of computing resources. Our examinations reveal that (i) executing invocations concurrently within a single container can provide comparable performance to that provided by multiple containers (i.e., traditional approaches); (ii) redundant resources generated within a container result in memory resource waste, which prolongs the execution time of function invocations. Motivated by these insightful observations, we propose FaaSBatch - a serverless framework that reduces invocation latency and saves scarce computing resources. In particular, FaaSBatch first classifies concurrent function requests into different function groups according to the invocation information. Next, FaaSBatch batches the invocations of each group, aiming to minimize resource utilization. Then, FaaSBatch utilizes an inline parallel policy to map each group of batched invocations into a single container. Finally, FaaSBatch expands and executes invocations of containers in parallel. To further reduce invocation latency and resource utilization, within each container, FaaSBatch reuses redundant resources created during function execution. We conduct extensive experiments based on Azure traces to evaluate the effectiveness and performance of FaaSBatch. We compare FaaSBatch with three state-of-the-art schedulers Vanilla, SFS, and Kraken. Our experimental results show that FaaSBatch effectively and remarkably slashes invocation latency and resource overhead. For instance, when executing I/O functions, FaaSBatch cuts back the invocation latency of Vanilla, SFS, and Kraken by up to 92.18%, 89.54%, and 90.65%, respectively; FaaSBatch also slashes the resource overhead of Vanilla, SFS, and Kraken by 58.89% to 94.77%, 43.72% to 90.39%, and 42.99% to 78.88%, respectively.

Increasing workload conditions lead to a significant surge in power consumption and computing node failures in data centers. The existing workload distribution strategies focused on either thermal awareness or failure mitigation, overlooking the impact of node failures on the energy efficiency of cloud data centers. To address this issue, a new holistic model is built to characterize the impacts of workloads, computing and cooling costs, heat recirculation, and node failure on the energy efficiency of cloud data centers. Leveraging such a holistic model, we propose a novel thermal-aware workload distribution strategy calledHGSAthat takes node failure into accountand can improve the energy efficiency of cloud data centers. Our empirical findings confirm that (i) faulty nodes lead to a large rise in power consumption, and (ii) failure locations play a vital role in the power consumption of data centers. Experimental results unveil that HGSA is adroit at making near-optimal decisions in workload distribution strategies. In particular, HGSA cuts down the minimum inlet temperature by 5.2$\%$-15$\%$, improves the maximum air temperature of a Computer Room Air Conditioner (CRAC) model by 4.2$\%$-26.5$\%$, lowers the cooling cost by 15.4$\%$-50$\%$compared to the existing solutions. Furthermore, HGSA cuts back the total power consumption by 0.65$\%$-78$\%$.

Multibit 3-D NAND flash-based solid-state disks (SSDs), offering high storage density, contain multiple types of pages to accommodate multiple bits per physical cell. Full sequence program or FSP can program multiple pages in a word line at a time, thereby improving write throughput. Unfortunately, large-grained FSP operations coarsely aggregate consecutive logical pages on the same word line, which adversely affects the parallelism and latency of read requests. Moreover, FSP smooths the program latencies for different types of pages, whereas the pages still exhibit various read latencies. Multiple read latencies and lower read parallelism noticeably deteriorate the completion efficiency of read requests: SSD performance is degraded. To address this issue, we propose an FSP data allocation scheme called FSPDA that incorporates the physical structure characteristics of multibit 3-D NAND, aiming to bolster the read performance of 3-D NAND Flash-based SSDs. FSPDA embraces two distinctive and vital features. First, according to the distance between logical pages, FSPDA allocates logical pages to specified parallel units and stipulates that consecutive logical pages must be assigned to different planes, thus improving read parallelism and data locality. Second, to further reduce read latency, FSPDA employs cache hits to determine hot and cold data to be placed to low-latency and high-latency pages, respectively. We compare FSPDA with two state-of-the-art schemes—OSPADA and single-operation-multiple-location—in terms of multiplane read (MPR) counts, read response time, and GC counts under eight real-world workloads. The experimental results show that compared with the existing schemes, FSPDA slashes the number of MPR counts, read response time, and the number of GC counts by an average of 34.4%, 28.5%, and 13.6%, respectively.

Garbage collection or GC running in the controller of 3-D NAND flash-based solid-state disks—SSDs—plays a critical role in the performance of storage systems. SSD manufacturers have developed various GC solutions based on internal data movement or IDM to mitigate the impacts of GC on request latency. Due to the circuit characteristics of flash memory, the existing IDM-based GC strategies are restricted by page parity during data movement: odd pages must be migrated to odd pages, and even pages to even pages. When migrating two consecutive pages with the same parity, the free page between the two migrated pages will be wasted after the migration is complete. This ever-increasing page waste problem inevitably deteriorates the storage space utilization of flash memory, thereby degrading the overall performance of 3-D NAND flash-based SSDs. To address this issue, we propose a parity-check GC scheme called PcGC to revamp SSD performance by alleviating page waste during GC. We build a parity-check unit in PcGC to facilitate checking the parity of migrated valid pages and destination pages. According to the parity results offered by the parity-check unit, PcGC dynamically adjusts the migration order of valid pages during the course of GC. In doing so, PcGC fundamentally averts page waste caused by the page parity restriction, thereby enhancing 3-D NAND flash performance. We quantitatively evaluate the performance of PcGC in terms of wasted pages, storage utilization, GC counts, write amplification, and average response time. We compare PcGC against the two state-of-the-art schemes—Amphibian and Tiny-tail flash (TTflash). The experimental results derived from the nine real-world workload traces unfold that compared with Amphibian and TTflash: 1) PcGC curtails the number of wasted pages by up to 91.4% with an average of 53.75%; 2) cuts back the number of GC counts by up to 52.2% with an average of 11.9%; and 3) slashes average write response time by up to 77.8% with an average of 13.0%.

Data deduplication has been broadly used in Cloud due to its storage space saving ability. An issue of deduplication is the contiguous data chunks in a segment may be scattered in different containers. This phenomenon is called data fragmentation. Because of data fragmentation, a restore process must reference various containers across a wide variety of segments, thereby hurting the restore performance. Capping methods that rewrite the data chunks of low Container Reference Ratio (CRR) containers are developed to alleviate data fragmentation. We analyze and observe from real traces that a number of segments only point to lowCRRcontainers, while some others only contain highCRRcontainers. This interesting observation is ignored by the existing capping methods which sort containers from a single segment, falling short in searching multiple segments collectively. Thus, the reference count of selected containers in the existing capping methods is still high. To address this problem, we propose a multi-segment greedy rewriting method named MGRM. MGRM sorts containers of segments in a sequential way. More specifically, given thei-thsegment currently being processed, MGRM will sort all the containers in the topi-thsegments. This salient searching feature enables MGRM to select and rewrite the true low-reference container set. Moreover, to achieve a good balance between deduplication ratio and restore performance, MGRM has two working modes: an optimal rewriting mode and a radical rewriting mode. When working in the optimal rewriting mode, MGRM aims to improve the deduplication ratio; when the radical rewriting mode, MGRM strives to improve the restore performance. MGRM adaptively switches the working mode according to workload. Furthermore, unlike the existing capping methods that improve restore performance at the cost of the deduplication ratio, MGRM pays attention to both aspects. Our extensive experimental results show that MGRM achieves high restore performance, coupled with a high deduplication ratio. In particular, compared with the two state-of-art schemes FC and FLC, MGRM improves the deduplication ratio and restore performance by up to 114.83% and 99.34%, respectively.

With the mushrooming growth of data volumes, data replica placement plays a key role in promoting the energy efficiency and Quality-of-Service (QoS) of data-intensive data centers. The existing data placement strategies mainly focus on storage performance improvement or QoS enhancement in data centers, but ignore the indispensable factor - heat recirculation. To bridge this gap, we propose a thermal-aware data replica placement strategy called TADRP, aiming to improve cooling efficiency and minimize the total power consumption of data-intensive data centers. TADRP leverages an ant colony optimization (ACO) algorithm coupled with Laplacian probability distribution to find a quasi-optimal disk sequence (or Disk Sequence for short), which consists of disks selected from different rack servers to place data replicas. TADRP categorizes disks of Disk Sequence into active and inactive ones, by placing hot and cold replicas on active and inactive disks, respectively. We quantitatively evaluate TADRP in terms of cooling costs, total power consumption, number of power-state transitions, and execution time. We compare TADRP with four alternative solutions, namely, Random, Hadoop, SRS, and CDP-NSGAII. Experimental results show that TADRP can reduce the cooling costs and the total power of the existing solutions by 14.7% - 61.7% and 19.2%-55.1%, respectively, without undesirable I/O performance drops.

In this paper, we propose a thermal-aware data replica placement strategy called TADRP. This strategy is designed in two steps. First, the ant colony optimization (ACO) algorithm based on the Laplacian probability distribution obtains the near-optimal disk sequence with the minimum overall power consumption. Second, the near-optimal disk sequence is partitioned into the area of active and inactive disks; then, the sequence-based data placement policy places data replicas in the partitioned disk areas. Our objection is to adopt the TADRP strategy to improve cooling efficiency and reduce the overall power consumption of DDCs. To evaluate the overall power consumption of DDCs, we integrate TADRP into a thermal model that takes into account heat recirculation effects account. We apply a real dataset with different read/write ratios following the Zipf distribution to verify the effectiveness of TADRP for energy savings. Experiment results unveil that our TADRP is capable of offering about 19.2 %-55.1% for total energy savings without significantly degrading I/O performance against Random, Hadoop, SRS, CDP-NSGAIIIR schemes.

The development of cloud computing leads to an exponential growth of data, which requires expanding the storage capacity to meet the storage needs, in exchange the energy consumption of the data center will also increase. Many traditional data placement schemes attempt to achieve energy consumption minimization by optimizing the distribution of data requests, however, ignoring the impact of heat recirculation in data placement. To fill this gap, we propose a heat-recirculation-aware data placement strategy called HRADP to achieve optimized data placement to data centers. Furthermore, our strategy can minimize the overall energy consumption of data centers and improve throughput. Specifically, we consider heat recirculation between data nodes by regulating the energy consumption limit of each data node. We implement this data placement strategy on a data center simulation platform, CloudSim, and compare it with two data placement strategies, TIGER and HDFS. The experimental results unveil that HRADP achieves 2.6x - 25.7x performance improvement in the same energy consumption.