While modeling multi-contact manipulation as a quasi-static mechanical process transitioning between different contact equilibria, we propose formulating it as a planning and optimization problem, explicitly evaluating (i) contact stability and (ii) robustness to sensor noise. Specifically, we conduct a comprehensive study on multi-manipulator control strategies, focusing on dual-arm execution in a planar peg-in-hole task and extending it to the Multi-Manipulator Multiple Peg-in-Hole (MMPiH) problem to explore increased task complexity. Our framework employs Dynamic Movement Primitives (DMPs) to parameterize desired trajectories and Black-Box Optimization (BBO) with a comprehensive cost function incorporating friction cone constraints, squeeze forces, and stability considerations. By integrating parallel scenario training, we enhance the robustness of the learned policies. To evaluate the friction cone cost in experiments, we test the optimal trajectories computed for various contact surfaces, i.e., with different coefficients of friction. The stability cost is analytical explained and tested its necessity in simulation. The robustness performance is quantified through variations of hole pose and chamfer size in simulation and experiment. Results demonstrate that our approach achieves consistently high success rates in both the single peg-in-hole and multiple peg-in-hole tasks, confirming its effectiveness and generalizability. The video can be found at https://youtu.be/IU0pdnSd4tE.

In this work, we present a simplified quasi-static model of a two-point contact gripper turning a circular valve to predict the reaction torques produced at the base of the valve as a function of the axis misalignment. Specifically, we learned that geometric features such as (i) the misalignment vector being tangent to the reaction torques, (ii) length of the misalignment vector being directly proportional to the magnitude of the reaction torques and (iii) small axial misalignments resulting in well defined ‘double-loops’ in the 2D reaction torques space are indicative of axis misalignment.

At the cross section of the fields of Uneven Terrain Navigation and Multi Agent Systems (MAS), in this work, a Detachable Compliant Modular Robot (DCMR) which can perform concurrent scene exploration by detaching into numerous parts, while preserving its ability to climb stairs is proposed and built. A spring is designed and used in the modular robot taking the worst-case-scenario of stairs encountered in an urban setting. In addition to the actuators at the wheels, an additional set of actuators per module are introduced to enable the detachment and re-attachment. The design additions and their trade-offs are discussed. Potential applications are presented with special focus on improving coverage of a map with obstacles/slabs large enough to merit exploration by climbing them. The problem of turning in crammed spaces is solved using the ability to detach of DCMR. The detaching & re-attaching capability, and stair climbing of the composite modular robot are demonstrated through experimentation using the prototype.

Stair Climbing is a key functionality desired for robots deployed in Urban Search and Rescue (USAR) scenarios. A novel compliant modular robot was proposed earlier to climb steep and big obstacles. This work extends the functionality of this robot to ascend and descend stairs of dimensions that are also typical of an urban setting. Stair Climbing is realized by equipping the robot's link joints with optimally designed passive spring pairs that resist clockwise and counter clockwise moments generated by the ground during the climbing motion. This 3-module robot is only propelled by wheel actuators. Desirable stair climbing configurations are estimated a-priori and used to obtain the optimal stiffness for springs. Extensive numerical simulation results over different stair configurations are shown. The numerical simulations are corroborated by experimentation using the prototype and its performance is tabulated for different types of surfaces.