In frequency-division duplexing (FDD) multiple-input multiple-output (MIMO) systems, obtaining accurate downlink channel state information (CSI) for precoding is vastly challenging due to the tremendous feedback overhead with the growing number of antennas. Utilizing uplink pilots for downlink CSI estimation is a promising approach that can eliminate CSI feedback. However, the downlink CSI estimation accuracy diminishes significantly as the number of channel paths increases, resulting in reduced spectral efficiency. In this paper, we demonstrate that achieving downlink spectral efficiency comparable to perfect CSI is feasible by combining uplink CSI with limited downlink CSI feedback information. Our proposed downlink CSI feedback strategy transmits quantized phase information of downlink channel paths, deviating from conventional limited methods. We put forth a mean square error (MSE)-optimal downlink channel reconstruction method by jointly exploiting the uplink CSI and the limited downlink CSI. Armed with the MSE-optimal estimator, we derive the MSE as a function of the number of feedback bits for phase quantization. Subsequently, we present an optimal feedback bit allocation method for minimizing the MSE in the reconstructed channel through phase quantization. Utilizing a robust downlink precoding technique, we establish that the proposed downlink channel reconstruction method is sufficient for attaining a sum-spectral efficiency comparable to perfect CSI.

Nonlinear self-interference cancellation (SIC) techniques are essential for enabling full-duplex communication systems, which can offer spectral efficiencies twice that of traditional half-duplex systems. The challenge of nonlinear SIC is similar to the classic problem of system identification in adaptive filter theory, whose crux lies in constructing the optimal nonlinear basis functions of a nonlinear system. This becomes especially difficult when the system input has a non-stationary distribution, as is the case in practical wireless systems. In this paper, we propose a novel algorithm for nonlinear digital SIC that adaptively constructs orthonormal polynomial basis functions according to the non-stationary moments of the transmit signal. By combining these basis functions with the least mean squares (LMS) algorithm, we introduce a new SIC technique, called the adaptive orthonormal polynomial LMS (AOP-LMS) algorithm. To reduce computational complexity for practical systems, we augment our approach with a precomputed look-up table, which maps a given modulation and coding scheme to its corresponding basis functions. Numerical simulation indicates that our proposed method surpasses existing state-of-the-art SIC algorithms in terms of convergence speed and mean squared error when the transmit signal is non-stationary, such as with adaptive modulation and coding. Experimental evaluation with a wireless testbed further confirms that our proposed approach outperforms existing digital SIC algorithms in practical systems.

In frequency-division duplexing (FDD) multipleinput multiple-output (MIMO) systems, obtaining accurate downlink channel state information (CSI) becomes challenging due to the tremendous feedback overhead that increases with the number of antennas. Using uplink pilots to estimate downlink CSI is a promising approach that can eliminate the need for CSI feedback, but its accuracy decreases significantly as the number of channel paths increases. In this paper, we propose a mean square error (MSE)-optimal downlink channel reconstruction method that jointly utilizes uplink CSI and limited downlink CSI. With the MSE-optimal estimator, we derive the MSE as a function of the number of feedback bits for channel phase quantization and show the optimal feedback bit allocation method to minimize the MSE. Harnessing robust downlink precoding, we demonstrate that the proposed downlink channel reconstruction is sufficient to achieve a sum-spectral efficiency comparable to that with perfect downlink CSI.

This poster presents system architecture, software stack, and performance analysis for SK hynix’s very first GDDR6-based processing-in-memory (PIM) product sample, called Accelerator-in-Memory (AiM).AiM is designed for the in-memory acceleration of matrix-vector product operations, which are commonly found in machine learning applications. The strength of AiM primarily comes from the two design factors, which are 1) all-bank operation support and 2) extended DRAM command set. All-bank operations allow AiM to fully utilize the abundant internal DRAM bandwidth, which makes it an attractive solution for memory-bound applications. The extended command set allows the host to address these new operations efficiently and provides a clean separation of concerns between the AiM architecture and its software stack design.We present a dedicated FPGA-based reference platform with a software stack, which is used to validate AiM design and evaluate its system-level performance. We also demonstrate FMC-based AiM extension cards that are compatible with the off-the-shelf FPGA boards and serve as an open research platform allowing potential collaborators and academic institutes to access our hardware and software systems.

We propose a method designed to push the frontiers of unconstrained face recognition in the wild with an emphasis on extreme out-of-plane pose variations. Existing methods either expect a single model to learn pose invariance by training on massive amounts of data or else normalize images by aligning faces to a single frontal pose. Contrary to these, our method is designed to explicitly tackle pose variations. Our proposed Pose-Aware Models (PAM) process a face image using several pose-specific, deep convolutional neural networks (CNN). 3D rendering is used to synthesize multiple face poses from input images to both train these models and to provide additional robustness to pose variations at test time. Our paper presents an extensive analysis of the IARPA Janus Benchmark A (IJB-A), evaluating the effects that landmark detection accuracy, CNN layer selection, and pose model selection all have on the performance of the recognition pipeline. It further provides comparative evaluations on IJB-A and the PIPA dataset. These tests show that our approach outperforms existing methods, even surprisingly matching the accuracy of methods that were specifically fine-tuned to the target dataset. Parts of this work previously appeared in [1] and [2].

We introduce our method and system for face recognition using multiple pose-aware deep learning models. In our representation, a face image is processed by several pose-specific deep convolutional neural network (CNN) models to generate multiple pose-specific features. 3D rendering is used to generate multiple face poses from the input image. Sensitivity of the recognition system to pose variations is reduced since we use an ensemble of pose-specific CNN features. The paper presents extensive experimental results on the effect of landmark detection, CNN layer selection and pose model selection on the performance of the recognition pipeline. Our novel representation achieves better results than the state-of-the-art on IARPA's CS2 and NIST's IJB-A in both verification and identification (i.e. search) tasks.