Complex building structures fundamentally limit indoor wireless performance. While the wireless industry consistently pursues optimal channel capacity, architectural constraints remain significant factors, largely neglected by conventional workflows. To bridge the gap, this paper expands the inter-disciplinary building wireless performance (BWP) framework by introducing a layout-specific evaluation of area spectral efficiency (ASE). We propose ASE gain as a novel metric to quantify the impact of building layouts on indoor wireless channel capacity. Furthermore, we derive and validate an analytical model for the ASE gain against Monte Carlo simulations. This approach significantly reduces the computation time from hours to minutes with a relative error of less than 1%. Numerical results demonstrate that the ASE gain is significantly influenced by building layouts and wireless parameters. For example, in multi-rectangular layouts, reducing the reception threshold density of 10 dBWm−2decreases the variation range by 0.2059 at 1 GHz, whereas it increases the range by 0.1990 at 28 GHz. For non-rectangular polygonal layouts, the variation range is one order of magnitude larger than in simple rectangular rooms. This work highlights the importance of integrating the ASE gain into future building design. It complements existing metrics such as power gain and interference gain to ensure that buildings provide sufficient margin for the future deployment of high-density networks.

Deep learning (DL)-based methods show great potential in computed tomography (CT) imaging field. The DL-based reconstruction methods are usually evaluated on the training and testing datasets which are obtained from the same distribution, i.e., the same CT scan protocol (i.e., the region setting, kVp, mAs, etc.). In this work, we focus on analyzing the robustness of the DL-based methods against protocol-specific distribution shifts (i.e., the training and testing datasets are from different region settings, different kVp settings, or different mAs settings, respectively). The results show that the DL-based reconstruction methods are sensitive to the protocol-specific perturbations which can be attributed to the noise distribution shift between the training and testing datasets. Based on these findings, we presented a low-dose CT reconstruction method using an unsupervised strategy with the consideration of noise distribution to address the issue of protocol-specific perturbations. Specifically, unpaired sinogram data is enrolled into the network training, which represents unique information for specific imaging protocol, and a Gaussian mixture model (GMM) is introduced to characterize the noise distribution in CT images. It can be termed as GMM based unsupervised CT reconstruction network (GMM-unNet) method. Moreover, an expectation-maximization algorithm is designed to optimize the presented GMM-unNet method. Extensive experiments are performed on three datasets from different scan protocols, which demonstrate that the presented GMM-unNet method outperforms the competing methods both qualitatively and quantitatively.

Photon counting computed tomography (PCCT) has the ability to identify individual photons, resulting in quantitative material identification. Meanwhile, several technical challenges still exist in current PCCT imaging systems, including increased noise and suboptimal bin selection. These nonideal effects can substantially degrade the reconstruction performance and material estimation accuracy. To address these issues, in this work, we present a novel system for high-performance spectral PCCT imaging, which is a combination of multiple dynamic modulations, interpolation-based measurements processing strategy and advanced reconstruction method. For simplicity, this new PCCT imaging system is referred to as "MDM-PCCT". Specifically, the multiple dynamic modulations consist of dynamic kVp modulation, dynamic spectrum modulation and dynamic energy threshold modulation. In the dynamic kVp modulation, three kVp values, i.e., 80, 110 and 140, are included, and the tube voltage waveform follows a sinusoidal curve which is more practical than the rectangular curve in the fast kV switching mode. In the dynamic spectrum modulation, the X-ray spectra are processed by selective spatial-spectral filters to balance the X-ray fluxes and increase the spectral separation. In the dynamic energy threshold modulation, the energy threshold is adaptively changed to determine the optimal bin selection. Furthermore, we propose an energy threshold determination method and interpolation-based measurements processing strategy to address the issue of non-uniform and sparse-view PCCT measurements, respectively. In addition, by considering the intrinsic characteristics of the MDM-PCCT images, we utilize an enhanced total variation regularized model for images reconstruction. Finally, numerical and preclinical studies demonstrate that the presented MDM-PCCT imaging system is capable of yielding uniform and high-fidelity PCCT measurements with noise consistency, and the presented reconstruction method further improves the image quality and material decomposition accuracy.

Energy-resolved computed tomography (ErCT) with a photon counting detector concurrently produces multiple CT images corresponding to different photon energy ranges. It has the potential to generate energy-dependent images with improved contrast-to-noise ratio and sufficient material-specific information. Since the number of detected photons in one energy bin in ErCT is smaller than that in conventional energy-integrating CT (EiCT), ErCT images are inherently more noisy than EiCT images, which leads to increased noise and bias in the subsequent material estimation. In this work, we first deeply analyze the intrinsic tensor properties of two-dimensional (2D) ErCT images acquired in different energy bins and then present a F ull- S pectrum-knowledge-aware Tensor analysis and processing (FSTensor) method for ErCT reconstruction to suppress noise-induced artifacts to obtain high-quality ErCT images and high-accuracy material images. The presented method is based on three considerations: (1) 2D ErCT images obtained in different energy bins can be treated as a 3-order tensor with three modes, i.e., width, height and energy bin, and a rich global correlation exists among the three modes, which can be characterized by tensor decomposition. (2) There is a locally piecewise smooth property in the 3-order ErCT images, and it can be captured by a tensor total variation regularization. (3) The images from the full spectrum are much better than the ErCT images with respect to noise variance and structural details and serve as external information to improve the reconstruction performance. We then develop an alternating direction method of multipliers algorithm to numerically solve the presented FSTensor method. We further utilize a genetic algorithm to tackle the parameter selection in ErCT reconstruction, instead of manually determining parameters. Simulation, preclinical and synthesized clinical ErCT results demonstrate that the presented FSTensor method leads to significant improvements over the filtered back-projection, robust principal component analysis, tensor-based dictionary learning and low-rank tensor decomposition with spatial-temporal total variation methods.

Cerebrovascular diseases, i.e., acute stroke, are a common cause of serious long-term disability. Cerebral perfusion computed tomography (CPCT) can provide rapid, high-resolution, quantitative hemodynamic maps to assess and stratify perfusion in patients with acute stroke symptoms. However, CPCT imaging typically involves a substantial radiation dose due to its repeated scanning protocol. Therefore, in this paper, we present a low-dose CPCT image reconstruction method to yield high-quality CPCT images and high-precision hemodynamic maps by utilizing the great similarity information among the repeated scanned CPCT images. Specifically, a newly developed low-rank tensor decomposition with spatial-temporal total variation (LRTD-STTV) regularization is incorporated into the reconstruction model. In the LRTD-STTV regularization, the tensor Tucker decomposition is used to describe global spatial-temporal correlations hidden in the sequential CPCT images, and it is superior to the matricization model (i.e., low-rank model) that fails to fully investigate the prior knowledge of the intrinsic structures of the CPCT images after vectorizing the CPCT images. Moreover, the spatial-temporal TV regularization is used to characterize the local piecewise smooth structure in the spatial domain and the pixels' similarity with the adjacent frames in the temporal domain, because the intensity at each pixel in CPCT images is similar to its neighbors. Therefore, the presented LRTD-STTV model can efficiently deliver faithful underlying information of the CPCT images and preserve the spatial structures. An efficient alternating direction method of multipliers algorithm is also developed to solve the presented LRTD-STTV model. Extensive experimental results on numerical phantom and patient data are clearly demonstrated that the presented model can significantly improve the quality of CPCT images and provide accurate diagnostic features in hemodynamic maps for low-dose cases compared with the existing popular algorithms.

In recent years, the boundaries between e-commerce and social networking have become increasingly blurred. Many e-commerce Web sites support the mechanism of social login where users can sign on the Web sites using their social network identities such as their Facebook or Twitter accounts. Users can also post their newly purchased products on microblogs with links to the e-commerce product Web pages. In this paper, we propose a novel solution for cross-site cold-start product recommendation, which aims to recommend products from e-commerce Web sites to users at social networking sites in “cold-start” situations, a problem which has rarely been explored before. A major challenge is how to leverage knowledge extracted from social networking sites for cross-site cold-start product recommendation. We propose to use the linked users across social networking sites and e-commerce Web sites (users who have social networking accounts and have made purchases on e-commerce Web sites) as a bridge to map users' social networking features to another feature representation for product recommendation. In specific, we propose learning both users' and products' feature representations (called user embeddings and product embeddings, respectively) from data collected from e-commerce Web sites using recurrent neural networks and then apply a modified gradient boosting trees method to transform users' social networking features into user embeddings. We then develop a feature-based matrix factorization approach which can leverage the learnt user embeddings for cold-start product recommendation. Experimental results on a large dataset constructed from the largest Chinese microblogging service Sina Weibo and the largest Chinese B2C e-commerce website JingDong have shown the effectiveness of our proposed framework.