Trapped-ion quantum computers exhibit promising potential to provide platforms for high-quality qubits and reliable quantum computation. The quantum charge coupled device (QCCD) architecture is a leading example that offers a modular solution to enable the realization of scalable quantum computers, paving the way for practical quantum algorithms with large qubit numbers. Within these devices, ions can be shuttled (moved) throughout the trap and through different dedicated zones, e.g., a memory zone for storage and a processing zone for the actual computation. However, due to decoherence of the ions’ quantum states, the qubits lose their quantum information over time. Thus, the required time steps of shuttling operations should be minimized. In this work,1 we propose a heuristic approach to determining an efficient shuttling schedule, which orchestrates the movement operations within the device. Given a quantum algorithm and a device architecture, the proposed approach produces shuttling schedules with a close-to-minimal amount of time steps for small-size QCCD architectures. For large-scale QCCD devices, empirical evaluations show promising results with respect to quality of the solution as well as performance. An implementation of the proposed approach is publicly available as part of the open-source Munich Quantum Toolkit (MQT) athttps://github.com/cda-tum/mqt-ion-shuttler.

Trapped ions are a promising technology for building scalable quantum computers. Not only can they provide a high qubit quality, but they also enable modular architectures, referred to as Quantum Charge Coupled Device (QCCD) architecture. Within these devices, ions can be shuttled (moved) throughout the trap and through different dedicated zones, e.g., a memory zone for storage and a processing zone for the actual computation. However, this movement incurs a cost in terms of required time steps, which increases the probability of decoherence, and, thus, should be minimized. In this paper, we propose a formalization of the possible movements in ion traps via Boolean satisfiability. This formalization allows for determining the minimal number of time steps needed for a given quantum algorithm and device architecture, hence reducing the decoherence probability. An empirical evaluation confirms that—using the proposed approach—minimal results (i.e., the lower bound) can be determined for the first time. An open-source implementation of the proposed approach is publicly available at https://github.com/cda-tum/mqt-ion-shuttler.

Quantum computers have the potential to solve important problems which are fundamentally intractable on a classical computer. The underlying physics of quantum computing platforms supports using multi-valued logic, which promises a boost in performance over the prevailing two-level logic. One key element to exploiting this potential is the capability to efficiently prepare quantum states for multi-valued, or qudit, systems. Due to the time sensitivity of quantum computers, the circuits to prepare the required states have to be as short as possible. In this paper, we investigate quantum state preparation with a focus on mixed-dimensional systems, where the individual qudits may have different dimensionalities. The proposed approach automatically realizes quantum circuits constructing a corresponding mixed-dimensional quantum state. To this end, decision diagrams are used as a compact representation of the quantum state to be realized. We further incorporate the ability to approximate the quantum state to enable a finely controlled trade-off between accuracy, memory complexity, and number of operations in the circuit. Empirical evaluations demonstrate the effectiveness of the proposed approach in facilitating fast and scalable quantum state preparation, with performance directly linked to the size of the decision diagram. The implementation is freely available as part of Munich Quantum Toolkit (MQT) at github.com/cda-tum/mqt-qudits.

The Quantum Charge Coupled Device (QCCD) architecture offers a modular solution to enable the realization of trappedion quantum computers with a large number of qubits. Within these devices, ions can be shuttled (moved) throughout the trap and through different dedicated zones. However, due to decoherence of the ions' quantum states, the qubits lose their quantum information over time. Thus, the shuttling needed for these shuttling operations should be minimized. In this extended abstract, we propose a concept towards a cycle-based heuristic approach to determining an efficient shuttling schedule for a given quantum circuit.

Most quantum computing architectures to date natively support multi-valued logic, albeit being typically operated in a binary fashion. Multi-valued, or qudit, quantum processors have access to much richer forms of quantum entanglement, which promise to significantly boost the performance and usefulness of quantum devices. However, much of the theory as well as corresponding design methods required for exploiting such hardware remain insufficient and generalizations from qubits are not straightforward. A particular challenge is the compilation of quantum circuits into sets of native qudit gates supported by state-of-the-art quantum hardware. In this work, we address this challenge by introducing a complete workflow for compiling any two-qudit unitary into an arbitrary native gate set. Case studies demonstrate the feasibility of both, the proposed approach as well as the corresponding implementation (which is freely available at github.com/cda-tum/qudit-entanglement-compilation).

Quantum computers promise to efficiently solve important problems classical computers never will. However, in order to capitalize on these prospects, a fully automated quantum software stack needs to be developed. This involves a multitude of complex tasks from the classical simulation of quantum circuits, over their compilation to specific devices, to the verification of the circuits to be executed as well as the obtained results. All of these tasks are highly non-trivial and necessitate efficient data structures to tackle the inherent complexity. Starting from rather straight-forward arrays over decision diagrams (inspired by the design automation community) to tensor networks and the ZX-calculus, various complementary approaches have been proposed. This work provides a look "under the hood" of today's tools and showcases how these means are utilized in them, e.g., for simulation, compilation, and verification of quantum circuits.

Quantum computers promise to solve important problems faster than conventional computers ever could. Underneath is a fundamentally different computational primitive that introduces new challenges for the development of software tools that aid designers of corresponding quantum algorithms. The different computational primitives render classical simulation of quantum circuits particularly challenging. While the logic simulation of conventional circuits is comparatively simple with linear complexity with respect to the number of gates, quantum circuit simulation has to deal with the exponential memory requirements to represent quantum states on non-quantum hardware with respect to the number of qubits. Decision Diagrams (DDs) address this challenge through exploitation of redundancies in matrices and vectors to provide significantly more compact representations in many cases. Moreover, the probabilistic nature of quantum computations enables another angle to tackle the complexity: Quantum algorithms are resistant to some degree against small inaccuracies in the quantum state as these only lead to small changes in the outcome probabilities. We propose to exploit this resistance against (small) errors to gain even more compact decision diagrams. In this work, we investigate the potential of approximation in quantum circuit simulation in detail. To this end, we first present four dedicated schemes that exploit the error resistance and efficiently approximate quantum states represented by decision diagrams. Subsequently, we propose two simulation strategies that utilize those approximations schemes in order to improve the efficiency of DD-based quantum circuit simulation, while, at the same time, allowing the user to control the resulting degradation in accuracy. We empirically show that the proposed approximation schemes reduce the size of decision diagrams substantially and also analytically prove the effect of multiple approximations on the attained accuracy. Eventually, this enables speed-ups of the resulting approximate quantum circuit simulation of up to several orders of magnitudes—again, while controlling the fidelity of the result.

With quantum computers promising advantages even in the near-term NISQ era, there is a lively community that develops software and toolkits for the design of corresponding quantum circuits. Although the underlying problems are different, expertise from the design automation community, which developed sophisticated design solutions for the conventional realm in the past decades, can help here. In this respect, decision diagrams provide a promising foundation for tackling many design tasks such as simulation, synthesis, and verification of quantum circuits. However, users of the corresponding tools often do not have a proper background or an intuition about how these methods based on decision diagrams work and what their strengths and limits are. In this work, we first review the concepts of how decision diagrams can be employed, e.g., for the simulation and verification of quantum circuits. Afterwards, in an effort to make decision diagrams for quantum computing more accessible, we then present a visualization tool for quantum decision diagrams, which allows users to explore the behavior of decision diagrams in the design tasks mentioned above. Finally, we present decision diagram-based tools for simulation and verification of quantum circuits using the methods discussed above as part of the open-source Munich Quantum Toolkit (MQT)—a set of tools for quantum computing developed at the Technical University of Munich and the Johannes Kepler University Linz and released under the MIT license. More information about the corresponding tools is available at https://github.com/cda-tum/ddsim . By this, we provide an introduction of the concepts and tools for potential users who would like to work with them as well as potential developers aiming to extend them.

Quantum computers are constantly growing in their number of qubits, but continue to suffer from restrictions such as the limited pairs of qubits that may interact with each other. Thus far, this problem is addressed by mapping and moving qubits to suitable positions for the interaction (known as quantum circuit mapping). However, this movement requires additional gates to be incorporated into the circuit, whose number should be kept as small as possible since each gate increases the likelihood of errors and decoherence. State-of-the-art mapping methods utilize swapping and bridging to move the qubits along the static paths of the coupling map---solving this problem without exploiting all means the quantum domain has to offer. In this paper, we propose to additionally exploit quantum teleportation as a possible complementary method. Quantum teleportation conceptually allows to move the state of a qubit over arbitrary long distances with constant overhead---providing the potential of determining cheaper mappings. The potential is demonstrated by a case study on the IBM Q Tokyo architecture which already shows promising improvements. With the emergence of larger quantum computing architectures, quantum teleportation will become more effective in generating cheaper mappings.

Quantum computers promise to solve important problems faster than conventional computers. However, unleashing this power has been challenging. In particular, design automation runs into (1) the probabilistic nature of quantum computation and (2) exponential requirements for computational resources on non-quantum hardware. In quantum circuit simulation, Decision Diagrams (DDs) have previously shown to reduce the required memory in many important cases by exploiting redundancies in the quantum state. In this paper, we show that this reduction can be amplified by exploiting the probabilistic nature of quantum computers to achieve even more compact representations. Specifically, we propose two new DD-based simulation strategies that approximate the quantum states to attain more compact representations, while, at the same time, allowing the user to control the resulting degradation in accuracy. We also analytically prove the effect of multiple approximations on the attained accuracy and empirically show that the resulting simulation scheme enables speed-ups up to several orders of magnitudes.

Despite recent progress in physical implementations of quantum computers, a significant amount of research still depends on simulating quantum computations on classical computers. Here, most state-of-the-art simulators rely on array-based approaches which are perfectly suited for acceleration through concurrency using multi- or many-core processors. However, those methods have exponential memory complexities and, hence, become infeasible if the considered quantum circuits are too large. To address this drawback, complementary approaches based on decision diagrams (called DD-based simulation) have been proposed which provide more compact representations in many cases. While this allows to simulate quantum circuits that could not be simulated before, it is unclear whether DD-based simulation also allows for similar acceleration through concurrency as array-based approaches. In this work, we investigate this issue. The resulting findings provide a better understanding about when DD-based simulation can be accelerated through concurrent executions of sub-tasks and when not.

The computational power of quantum computers poses major challenges to new design tools since representing pure quantum states typically requires exponentially large memory. As shown previously, decision diagrams can reduce these memory requirements by exploiting redundancies. In this work, we demonstrate further reductions by allowing for small inaccuracies in the quantum state representation. Such inaccuracies are legitimate since quantum computers themselves experience gate and measurement errors and since quantum algorithms are somewhat resistant to errors (even without error correction). We develop four dedicated schemes that exploit these observations and effectively approximate quantum states represented by decision diagrams. We empirically show that the proposed schemes reduce the size of decision diagrams by up to several orders of magnitude while controlling the fidelity of approximate quantum state representations.

Quantum computers promise significant speedups in solving problems intractable for conventional computers but, despite recent progress, remain limited in scaling and availability. Therefore, quantum software and hardware development heavily rely on simulation that runs on conventional computers. Most such approaches perform strong simulation in that they explicitly compute amplitudes of quantum states. However, such information is not directly observable from a physical quantum computer because quantum measurements produce random samples from probability distributions defined by those amplitudes. In this work, we focus on weak simulation that aims to produce outputs which are statistically indistinguishable from those of error-free quantum computers. We develop algorithms for weak simulation based on quantum state representation in terms of decision diagrams. We compare them to using state-vector arrays and binary search on prefix sums to perform sampling. Empirical validation shows, for the first time, that this enables mimicking of physical quantum computers of significant scale.

With quantum computers on the brink of practical applicability, there is a lively community that develops toolkits for the design of corresponding quantum circuits. Many of the problems to be tackled here are similar to design problems from the classical realm for which sophisticated design automation tools have been developed in the previous decades. In this paper, we present JKQ---a set of tools for quantum computing developed at the Johannes Kepler University (JKU) Linz which utilizes this design automation expertise. By this, we offer complementary approaches for many design problems in quantum computing such as simulation, compilation, or verification. In the following, we provide an introduction of the tools for potential users who would like to work with them as well as potential developers aiming to extend them.

High-level descriptions of quantum algorithms do not take the restrictions of physical hardware into account. Therefore actually executing an algorithm in the form of a quantum circuit on a quantum computer requires compiling it for the desired target architecture first. The compilation of quantum circuits depends on efficient methods to be feasible for all but the trivial instances. To this end, different compiling methods have been introduced in the past, but room for improvement still exists. Moreover, just an efficient compilation process itself is not sufficient-the resulting circuits must be correct as well. In this summary paper, we review how existing compilation approaches can be optimized by utilizing heuristic search algorithms or exact reasoning engines. Furthermore, we review how the correctness of the obtained results can be verified afterwards by clever data structures such as decision diagrams. This illustrates core steps of a compilation flow which can generate minimal or close-to-minimal results for many instances and, additionally, guarantees correctness throughout the process.

Quantum computers are becoming a reality today due to the rapid progress made by researchers in the last years. In the process of building quantum computers, IBM has developed several versions-starting from 5-qubit architectures like IBM QX2 and IBM QX4 to larger 16- or 20-qubit architectures. These architectures support arbitrary rotations of a single qubit and a controlled negation (CNOT) involving two qubits. The two qubit operations come with added coupling-map restrictions that only allow specific physical qubits to be the control and target qubits of the operation. In order to execute a quantum circuit on the IBM QX architecture, CNOT gates must satisfy the so-called coupling constraints of the architecture. Previous works addressed this issue with the objective of reducing the number of gates and the circuit depth. However, in this article, we show that further improvements are possible. To this end, we present a general approach for further improving the number of gate operations and depth of the mapped circuit. The proposed approach encompasses the selection of physical qubits, determining initial and local permutations efficiently to obtain the final circuit mapped to the given IBM QX architecture. Through experiments, improvements are observed over existing methods in terms of the number of gates and circuit depth.

Quantum computing promises substantial speedups by exploiting quantum mechanical phenomena such as superposition and entanglement. Corresponding design methods require efficient means of representation and manipulation of quantum functionality. In the classical domain, decision diagrams have been successfully employed as a powerful alternative to straightforward means such as truth tables. This motivated extensive research on whether decision diagrams provide similar potential in the quantum domain-resulting in new types of decision diagrams capable of substantially reducing the complexity of representing quantum states and functionality. From an implementation perspective, many concepts and techniques from the classical domain can be re-used in order to implement decision diagrams packages for the quantum realm. However, new problems-namely how to efficiently handle complex numbers-arise. In this work, we propose a solution to overcome these problems. Experimental evaluations confirm that this yields improvements of orders of magnitude in the runtime needed to create and to utilize these decision diagrams. The resulting implementation is publicly available as a quantum DD package at http://iic.jku.at/eda/research/quantum_dd.

Optical circuits are considered a promising emerging technology for applications in ultra-high-speed networks or interconnects. However, the development of (automatic) synthesis approaches for such circuits is still in its infancy. Although first generic and automatic synthesis approaches have been proposed, no clear understanding exists yet on how to keep the costs of the resulting circuits as small as possible. In the domain of optical circuits, this is particularly interesting for the number of gates and the effect of so-called splitters to the signal strength. In this work, we investigate this relation by considering a variety of (existing as well as proposed) synthesis approaches for optical circuits. Our investigations show that reducing the number of gates and reducing the number of splitters are contradictory optimization objectives. Furthermore, the performance of synthesis guided with respect to gate efficiency as well as synthesis guided with respect to splitter freeness is evaluated and an overhead factor between the contradictory metrics is experimentally determined.