Abstract We say that a (multi)graph $$ \user2{G} = (\user2{V},\user2{E}) $$ has geometric thickness t if there exists a straight-line drawing $$ \user2{\varphi }:\user2{V} \to \mathbb{R}^{{\mathbf{2}}} $$ and a t -coloring of its edges where no two edges sharing a point in their relative interior have the same color. The Geometric Thickness problem asks whether a given multigraph has geometric thickness at most t . This problem was shown to be NP-hard for $$ \user2{t} = \mathbf{2} $$ (Durocher et al. Comput Geom 56:1–18, 2016. https://doi.org/10.1016/j.comgeo.2016.03.003 ). In this paper, we settle the computational complexity of Geometric Thickness by showing that it is $$\exists \mathbb {R}$$ -complete already for thickness 30 . Moreover, our reduction shows that the problem is $$\exists \mathbb {R}$$ -complete for 4392 -planar graphs, where a graph is k -planar if it admits a topological drawing with at most k crossings per edge. In the course of our paper we answer previous questions on geometric thickness and on other related problems, in particular that simultaneous graph embeddings of 31 edge-disjoint graphs and pseudo-segment stretchability with chromatic number 30 are $$\exists \mathbb {R}$$ -complete.

We study the common intersection of arrangements of double-wedges. We consider arrangements where double-wedges may be both bowties (which do not contain a vertical line) or hourglasses (which contain a vertical line), in contrast to earlier studies that focused on arrangements of only bowties. This generalization changes the setting drastically, in particular, with respect to all arguments involving the point-line duality. Namely, a point in the intersection of all double-wedges is equivalent to a line that stabs a set of segments S (corresponding to the bowties) while it avoids a different set of segments A (corresponding to the complement of the hourglasses). We show that in this general setting, the intersection of n double-wedges may consist of Ω( n 2 ) interior-disjoint regions. Further, we discuss Gallai-type results for arrangements of segments and anti-segments, and we provide algorithms for computing the intersection of such arrangements with worst-case optimal running time. Finally, we also prove that we can find a single intersection point in almost optimal running time, assuming that 3SUM admits no truly subquadratic-time algorithm.

We study the problem of computing the diameter and the mean distance of a continuous graph, i.e., a connected graph where all points along the edges, instead of only the vertices, must be taken into account. It is known that for continuous graphs with m edges these values can be computed in roughly O(m²) time. In this paper, we use geometric techniques to obtain subquadratic time algorithms to compute the diameter and the mean distance of a continuous graph for two well-established classes of sparse graphs. We show that the diameter and the mean distance of a continuous graph of treewidth at most k can be computed in O(n log^O(k) n) time, where n is the number of vertices in the graph. We also show that computing the diameter and mean distance of a continuous planar graph with n vertices and F faces takes O(n F log n) time.

The sliding cubes model is a well-established theoretical framework that supports the analysis of reconfiguration algorithms for modular robots consisting of face-connected cubes. The best algorithm currently known for the reconfiguration problem, by Abel and Kominers [arXiv, 2011], uses O(n3) moves to transform any n-cube configuration into any other n-cube configuration. As is common in the literature, this algorithm reconfigures the input into an intermediate canonical shape. In this paper we present an in-place algorithm that reconfigures any n-cube configuration into a compact canonical shape using a number of moves proportional to the sum of coordinates of the input cubes. This result is asymptotically optimal. Furthermore, our algorithm directly extends to dimensions higher than three.

A directed graph G is upward planar if it admits a planar embedding where each edge is y-monotone. Unlike planarity testing, upward planarity testing is NP-hard except in restricted cases, such as when the graph has the single-source property (i.e., each connected component has one source). In this paper, we present a dynamic data structure for maintaining an upward combinatorial embedding ℰ→(G) of a single-source upward planar graph subject to edge deletions, edge contractions, directed edge insertions across a face, and single-source-preserving vertex splits through specified corners (i.e., the gaps between pairs of consecutive edges that share a vertex and a face). We furthermore support changes to the embedding ℰ→(G) in the form of subgraph flips that mirror or slide the placement of a subgraph that is connected to the rest of the graph via at most two vertices. Updates that are incompatible with the current upward planar embedding are identified and rejected. All update operations are supported as long as the graph remains upward planar. In addition, we support queries that can tell whether two vertices can be connected with a directed edge while the graph remains single-source (we call these uplinkability queries). If a pair of vertices are not uplinkable, we facilitate one-flip-linkable queries: These point to a flip that makes them uplinkable, if any such flip exists. We dynamically maintain a linear-size data structure on G which supports incidence queries between a vertex and a face, and uplinkability queries for vertex pairs. We support all updates and queries in O(log² n) worst-case time.

We introduce the $k$-Plane Insertion into Plane drawing ($k$-PIP) problem: given a plane drawing of a planar graph $G$ and a set $F$ of edges, insert the edges in $F$ into the drawing such that the resulting drawing is $k$-plane. In this paper, we show that the problem is NP-complete for every $k\ge 1$, even when $G$ is biconnected and the set $F$ of edges forms a matching or a path. On the positive side, we present a linear-time algorithm for the case that $k=1$ and $G$ is a triangulation.

A geometric $t$-spanner $\mathcal{G}$ on a set $S$ of $n$ point sites in a metric space $P$ is a subgraph of the complete graph on $S$ such that for every pair of sites $p,q$ the distance in $\mathcal{G}$ is a most $t$ times the distance $d(p,q)$ in $P$. We call a connection between two sites a \emph{link}. In some settings, such as when $P$ is a simple polygon with $m$ vertices and a link is a shortest path in $P$, links can consist of $Θ(m)$ segments and thus have non-constant complexity. The spanner complexity is a measure of how compact a spanner is, which is equal to the sum of the complexities of all links in the spanner. In this paper, we study what happens if we are allowed to introduce $k$ Steiner points to reduce the spanner complexity. We study such Steiner spanners in simple polygons, polygonal domains, and edge-weighted trees. We show that Steiner points have only limited utility. For a spanner that uses $k$ Steiner points, we provide an $Ω(mn^{1/(t+1)}/k^{1/(t+1)})$ lower bound on the worst-case complexity of any $(t-\varepsilon)$-spanner, for any constant $\varepsilon \in (0,1)$ and integer constant $t \geq 2$. Additionally, we show NP-hardness for the problem of deciding whether a set of sites in a polygonal domain admits a $3$-spanner with a given maximum complexity using $k$ Steiner points. On the positive side, for trees we show how to build a $2t$-spanner that uses $k$ Steiner points of complexity $O(mn^{1/t}/k^{1/t} + n \log (n/k))$, for any integer $t \geq 1$. We generalize this to forests, and use it to obtain a $2\sqrt{2}t$-spanner in a simple polygon with complexity $O(mn^{1/t}(\log k)^{1+1/t}/k^{1/t} + n\log^2 n)$. When a link can be any path between two sites, we show how to improve the spanning ratio to $(2k+\varepsilon)$, for any constant $\varepsilon \in (0,2k)$, and how to build a $6t$-spanner in a polygonal domain with the same complexity.

Abstract For sets of n points, n even, in general position in the plane, we consider straight-line drawings of perfect matchings on them. It is well known that such sets admit at least $$C_{n/2}$$ C n / 2 different plane perfect matchings, where $$C_{n/2}$$ C n / 2 is the n /2-th Catalan number. Generalizing this result we are interested in the number of drawings of perfect matchings which have k crossings. We show the following results. (1) For every $$k\le \frac{1}{64}n^2-\frac{35}{32}n\sqrt{n}+\frac{1225}{64}n$$ k ≤ 1 64 n 2 - 35 32 n n + 1225 64 n , any set with n points, n sufficiently large, admits a perfect matching with exactly k crossings. (2) There exist sets of n points where every perfect matching has at most $$\frac{5}{72}n^2-\frac{n}{4}$$ 5 72 n 2 - n 4 crossings. (3) The number of perfect matchings with at most k crossings is superexponential in n if k is superlinear in n . (4) Point sets in convex position minimize the number of perfect matchings with at most k crossings for $$k=0,1,2$$ k = 0 , 1 , 2 , and maximize the number of perfect matchings with $$\left( {\begin{array}{c}n/2\\ 2\end{array}}\right) $$ n / 2 2 crossings and with $${\left( {\begin{array}{c}n/2\\ 2\end{array}}\right) }\!-\!1$$ n / 2 2 - 1

Abstract A simple drawingD(G) of a graph G is one where each pair of edges share at most one point: either a common endpoint or a proper crossing. An edge e in the complement of G can be inserted into D(G) if there exists a simple drawing of $$G+e$$ G + e extending D(G). As a result of Levi’s Enlargement Lemma, if a drawing is rectilinear (pseudolinear), that is, the edges can be extended into an arrangement of lines (pseudolines), then any edge in the complement of G can be inserted. In contrast, we show that it is -complete to decide whether one edge can be inserted into a simple drawing. This remains true even if we assume that the drawing is pseudocircular, that is, the edges can be extended to an arrangement of pseudocircles. On the positive side, we show that, given an arrangement of pseudocircles $$\mathcal {A}$$ A and a pseudosegment $$\sigma $$ σ , it can be decided in polynomial time whether there exists a pseudocircle $$\Phi _\sigma $$ Φ σ extending $$\sigma $$ σ for which $$\mathcal {A}\cup \{\Phi _\sigma \}$$ A ∪ { Φ σ } is again an arrangement of pseudocircles.

The total angular resolution of a straight-line drawing is the minimum angle between two edges of the drawing. It combines two properties contributing to the readability of a drawing: the angular resolution, which is the minimum angle between incident edges, and the crossing resolution, which is the minimum angle between crossing edges. We consider the total angular resolution of a graph, which is the maximum total angular resolution of a straight-line drawing of this graph. We prove tight bounds for the number of edges for graphs for some values of the total angular resolution up to a finite number of well specified exceptions of constant size. In addition, we show that deciding whether a graph has total angular resolution at least 60∘ is NP-hard. Further we present some special graphs and their total angular resolution.

We give both efficient algorithms and hardness results for reconfiguring between two connected configurations of modules in the hexagonal grid. The reconfiguration moves that we consider are "pivots", where a hexagonal module rotates around a vertex shared with another module. Following prior work on modular robots, we define two natural sets of hexagon pivoting moves of increasing power: restricted and monkey moves. When we allow both moves, we present the first universal reconfiguration algorithm, which transforms between any two connected configurations using O(n³) monkey moves. This result strongly contrasts the analogous problem for squares, where there are rigid examples that do not have a single pivoting move preserving connectivity. On the other hand, if we only allow restricted moves, we prove that the reconfiguration problem becomes PSPACE-complete. Moreover, we show that, in contrast to hexagons, the reconfiguration problem for pivoting squares is PSPACE-complete regardless of the set of pivoting moves allowed. In the process, we strengthen the reduction framework of Demaine et al. [FUN'18] that we consider of independent interest.

In extension problems of partial graph drawings one is given an incomplete drawing of an input graph G and is asked to complete the drawing while maintaining certain properties. A prominent area where such problems arise is that of crossing minimization. For plane drawings and various relaxations of these, there is a number of tractability as well as lower-bound results exploring the computational complexity of crossing-sensitive drawing extension problems. In contrast, comparatively few results are known on extension problems for the fundamental and broad class of simple drawings, that is, drawings in which each pair of edges intersects in at most one point. In fact, the extension problem of simple drawings has only recently been shown to be NP-hard even for inserting a single edge. In this paper we present tractability results for the crossing-sensitive extension problem of simple drawings. In particular, we show that the problem of inserting edges into a simple drawing is fixed-parameter tractable when parameterized by the number of edges to insert and an upper bound on newly created crossings. Using the same proof techniques, we are also able to answer several closely related variants of this problem, among others the extension problem for k-plane drawings. Moreover, using a different approach, we provide a single-exponential fixed-parameter algorithm for the case in which we are only trying to insert a single edge into the drawing.

We present the first universal reconfiguration algorithm for transforming a modular robot between any two facet-connected square-grid configurations using pivot moves. More precisely, we show that five extra “helper” modules (“musketeers”) suffice to reconfigure the remaining n modules between any two given configurations. Our algorithm uses $$O(n^2)$$ pivot moves, which is worst-case optimal. Previous reconfiguration algorithms either require less restrictive “sliding” moves, do not preserve facet-connectivity, or for the setting we consider, could only handle a small subset of configurations defined by a local forbidden pattern. Configurations with the forbidden pattern do have disconnected reconfiguration graphs (discrete configuration spaces), and indeed we show that they can have an exponential number of connected components. But forbidding the local pattern throughout the configuration is far from necessary, as we show that just a constant number of added modules (placed to be freely reconfigurable) suffice for universal reconfigurability. We also classify three different models of natural pivot moves that preserve facet-connectivity, and show separations between these models.

Face-connected configurations of cubes are a common model for modular robots in three dimensions. In this abstract and the accompanying video we study reconfigurations of such modular robots using so-called sliding moves. Using sliding moves, it is always possible to reconfigure one face-connected configuration of n cubes into any other, while keeping the robot connected at all stages of the reconfiguration. For certain configurations Ω(n²) sliding moves are necessary. In contrast, the best current upper bound is O(n³). It has been conjectured that there is always a cube on the outside of any face-connected configuration of cubes which can be moved without breaking connectivity. The existence of such a cube would immediately imply a straight-forward O(n²) reconfiguration algorithm. However, we present a configuration of cubes such that no cube on the outside can move without breaking connectivity. In other words, we show that this particular avenue towards an O(n²) reconfiguration algorithm for face-connected cubes is blocked.

We present a robust and compact meta-module for edge-hinged modular robot units such as M-TRAN, SuperBot, SMORES, UBot, PolyBot and CKBot, as well as for central-point-hinged ones such as Molecubes and Roombots. Thanks to the rotational degrees of freedom of these units, the novel meta-module is able to expand and contract, as to double/halve its length in each dimension. Moreover, for a large class of edge-hinged robots the proposed meta-module also performs the scrunch/relax and transfer operations required by any tunneling-based reconfiguration strategy, such as those designed for Crystalline and Telecube robots. These results make it possible to apply efficient geometric reconfiguration algorithms to this type of robots. We prove the size of this new meta-module to be optimal. Its robustness and performance substantially improve over previous results.