LTE evolved Multimedia Broadcast/Multicast Service (eMBMS) is an attractive solution for video delivery to very large groups in crowded venues. However, the deployment and management of eMBMS systems are challenging, due to the lack of real-time feedback from the user equipments (TIEs). Therefore, we present the Dynamic Monitoring (DyMo) system for low-overhead feedback collection. DyMo leverages eMBMS for broadcasting stochastic group instructions to all UEs. These instructions indicate the reporting rates as a function of the observed quality of service (QoS). This simple feedback mechanism collects very limited QoS reports from the TIEs. The reports are used for network optimization, thereby ensuring high QoS to the TIEs. We present the design aspects of DyMo and evaluate its performance analytically and via extensive simulations. Specifically, we show that DyMo infers the optimal eMBMS settings with extremely low overhead while meeting strict QoS requirements under different TIE mobility patterns and presence of network component failures. For instance, DyMo can detect the eMBMS signal-to-noise ratio experienced by the 0.1th percentile of the TIEs with a root mean square error of 0.05% with only 5 to 10 reports per second regardless of the number of TIEs.

WiFi multicast to very large groups has gained attention as a solution for multimedia delivery in crowded areas. Yet, the most recently proposed schemes do not provide performance guarantees and none have been tested at scale. To address the issue of providing high multicast throughput with performance guarantees, we present the design and experimental evaluation of the multicast dynamic rate adaptation (MuDRA) algorithm. MuDRA balances fast adaptation to channel conditions and stability, which is essential for multimedia applications. MuDRA relies on feedback from some nodes collected via a light-weight protocol and dynamically adjusts the RA response time. Our experimental evaluation of MuDRA on the ORBIT testbed with over 150 nodes shows that MuDRA outperforms other schemes and supports high throughput multicast flows to hundreds of receivers while meeting quality requirements. MuDRA can support multiple high-quality video streams, where 90% of the nodes report excellent or very good video quality.

LTE evolved Multimedia Broadcast/Multicast Service (eMBMS) is an attractive solution for video delivery to very large groups in crowded venues. However, deployment and management of eMBMS systems is challenging, due to the lack of realtime feedback from the User Equipment (UEs). Therefore, we present the Dynamic Monitoring (DyMo) system for low-overhead feedback collection. DyMo leverages eMBMS for broadcasting Stochastic Group Instructions to all UEs. These instructions indicate the reporting rates as a function of the observed Quality of Service (QoS). This simple feedback mechanism collects very limited QoS reports from the UEs. The reports are used for network optimization, thereby ensuring high QoS to the UEs. We present the design aspects of DyMo and evaluate its performance analytically and via extensive simulations. Specifically, we show that DyMo infers the optimal eMBMS settings with extremely low overhead, while meeting strict QoS requirements under different UE mobility patterns and presence of network component failures. For instance, DyMo can detect the eMBMS Signal-to-Noise Ratio (SNR) experienced by the 0.1% percentile of the UEs with Root Mean Square Error (RMSE) of 0.05% with only 5 to 10 reports per second regardless of the number of UEs.

WiFi multicast to very large groups has gained attention as a solution for multimedia delivery in crowded areas. Yet, most recently proposed approaches do not provide performance guarantees. In this paper, we describe the AMuSe system, whose objective is to enable scalable and adaptive WiFi multicast services. AMuSe includes a lightweight feedback mechanism that allows monitoring channel quality of a large number of users. This feedback allows the system to dynamically optimize the multicast transmission rate at the AP. We implemented AMuSe on the ORBIT testbed and evaluated its performance in large groups with approximately 200 WiFi devices in different scenarios. We show that AMuSe supports high throughput multicast flows to hundreds of receivers while meeting quality requirements and that it outperforms other systems.

WiFi multicast to very large groups has gained attention as a solution for multimedia delivery in crowded areas. Yet, most recently proposed schemes do not provide performance guarantees and none have been tested at scale. To address the issue of providing high multicast throughput with performance guarantees, we present the design and experimental evaluation of the Multicast Dynamic Rate Adaptation (MuDRA) algorithm. MuDRA balances fast adaptation to channel conditions and stability, which is essential for multimedia applications. MuDRA relies on feedback from some nodes collected via a light-weight protocol and dynamically adjusts the rate adaptation response time. Our experimental evaluation of MuDRA on the ORBIT testbed with over 150 nodes shows that MuDRA outperforms other schemes and supports high throughput multicast flows to hundreds of receivers while meeting quality requirements. MuDRA can support multiple high quality video streams, where 90% of the nodes report excellent or very good video quality.

WiFi networks have been globally deployed and most mobile devices are currently WiFi-enabled. While WiFi has been proposed for multimedia content distribution, its lack of adequate support for multicast services hinders its ability to provide multimedia content distribution to a large number of devices. In this paper, we present the AMuSe system, whose objective is to enable scalable and adaptive WiFi multicast services. AMuSe is based on accurate receiver feedback and incurs a small control overhead. In particular, we develop an algorithm for dynamic selection of a subset of the multicast receivers as feedback nodes, which periodically send information about the channel quality to the multicast sender. This feedback information can be used by the multicast sender to optimize multicast service quality, e.g., by dynamically adjusting transmission bitrate. AMuSe does not require any changes to the standards or any modifications to the WiFi devices. We implemented AMuSe on the ORBIT testbed and evaluated its performance in large groups with approximately 200 WiFi devices, both with and without interference sources. Our extensive experiments demonstrate that AMuSe can provide accurate feedback in a dense multicast environment. It outperforms several alternatives even in the case of external interference and changing network conditions.

We present a control plane architecture to accelerate multicast and incast traffic delivery for data-intensive applications in cluster-computing interconnection networks. The architecture is experimentally examined by enabling physical layer optical multicasting on-demand for the application layer to achieve non-blocking performance.

IEEE 802.11-based wireless local area networks, referred to as WiFi, have been globally deployed and the vast majority of mobile devices are currently WiFi-enabled. While WiFi has been proposed for multimedia content distribution, its lack of adequate support for multicast services hinders its ability to provide multimedia content distribution to a large number of devices. We propose AMuSe, a scalable and adaptive interference mitigation solution for WiFi multicast services which is based on accurate receiver feedback and that incurs a small control overhead. Specifically, we develop a scheme for dynamic selection of a subset of the multicast receivers as feedback nodes, which periodically send information, such as channel quality or received packet statistics, to the multicast sender. This feedback information is used by the multicast sender to optimize the multicast service quality, e.g., by dynamically adjusting the transmission bit-rate. Our proposed solution does not require any changes to the standards or any modifications to the WiFi devices. We have implemented the proposed solution in the ORBIT testbed and evaluated its performance in large groups with approximately 250 receivers, both with and without interference sources. Our online experiments demonstrate that our system provides practical multicast services that can accommodate hundreds of receivers.